• 제목/요약/키워드: explosion damage

검색결과 318건 처리시간 0.022초

LPG 누출시 피해거리 및 폭발영향에 관한 연구 (A Study on the Damaging Distance and the Explosion Effect by the LPG Release)

  • 이경덕;신창섭
    • 한국안전학회지
    • /
    • 제14권2호
    • /
    • pp.109-115
    • /
    • 1999
  • The release of gas from the LPG storage tank by the rupture or leakage can occure explosion and this causes serious damage to people and structures. In this study, the explosion effect and damaging distance were measured for the LPG cloud explosion to perform the quantitative risk assessment for the PSM, and the effective parameters on the explosion were found. The gas dispersion and mass contaminant in the explosion limits were calculated by using DEGADIS, and it was converted to TNT equivalency and damaging distance. As a result, the wind speed was the most effective parameter on the diffusion rate and TNT equivalency, and the damaging distance were increased with decrease of wind speed and surface roughness.

  • PDF

BLEVE와 Fireball의 매개변수 민감도분석 및 피해 산정 (Parametric Sensitivity Analysis and Damage Estimation for BLEVE and Fireball)

  • 김형석;김인태;송광호;고재욱;김인원
    • 한국가스학회지
    • /
    • 제2권3호
    • /
    • pp.25-36
    • /
    • 1998
  • 석유화학산업에서는 많은 복잡한 공정과 고온, 고압으로 가연성과 반응성을 가진 화학물질을 사용$\cdot$저장하고 있기 때문에 화재 및 폭발사고의 가능성이 잠재하고 있다. 화학공장은 특성상 BLEVE (Boiling Liquid Expanding Vapor Explosion)와 Fireball이 일어날 가능성이 높다. 본 연구에서는 BLEVE와 Fireball에 의한 폭발 영향평가를 위하여 모델을 제시하고 피해를 예측 할 수 있는 컴퓨터 프로그램을 개발하였다. BLEVE는 단열 팽창 모델, 등온 팽창 모델, 물리적 폭발모델을 Fireball은 Solid 모델을 사용하였으며 모델의 매개변수의 민감도를 분석하였다. 또한, 벤젠, 톨루엔, 메타-자일렌의 BLEVE와 Fireball에 의한 폭발량 등의 피해를 산정하였다.

  • PDF

일방향 철근 콘크리트 슬래브의 폭발 피해 분석을 위한 최적의 비파괴검사법에 관한 연구 (The Study on the Optimal NDT Method for the Explosion Damage Analysis for One-way RC Slabs)

  • 이승재;오태근;박종일;김희식
    • 한국안전학회지
    • /
    • 제32권5호
    • /
    • pp.62-68
    • /
    • 2017
  • It is necessary to analyze on the compressive strength among material properties of concrete for confirming damages of architectures due to large explosion. A non destructive test is known as the representative methods estimating compressive strength and ultrasonic pulse velocity, rebound hardness test are widely used because of their simplicity, convenience. But combined method supplementing two types is applied at now as they are affected by the characteristics of test specimen. In this research to check damages on the members of structure before and after explosion, the characteristics of compressive strength are compared and analyzed through a real explosion test prior to full scale structures. The test results showed that the larger the TNT powder and the shorter the distance, the greater the decrease in strength before and after the explosion and that the largest displacement and moment for the explosive load and the greatest decrease in the strength at the central part. Due to the surface condition and the thickness variation of the concrete specimens, the standard deviation value is the smallest in the combining method of fusion of the ultrasonic method and rebound hardness method. Thus, the combining method can be one of appropriate methods to evaluate the strength in the reinforced concrete structures damaged by the explosion.

실내 LPG 누출시 폭발특성에 관한 연구 (A Study on the Vented Gas Explosion Characteristics of Indoor Leakage of the LPG)

  • 오규형;김홍;김상섭;조영도;조지환;오신규
    • 한국가스학회지
    • /
    • 제3권3호
    • /
    • pp.51-57
    • /
    • 1999
  • 본 연구에서는 연료로 많이 사용될 뿐 아니라 폭발사고도 많이 발생하는 액화석유가스(LPG)가 밀폐공간 내에 누출되어 가스폭발사고가 발생할 경우 폭발에 의한 피해발생 현상들의 예측과 위험성을 평가하고자 폭발시 개구부가 발생되는 가스폭발에 대한 폭발특성측정 실험을 실시하였다 . 실험장치의 크기는 가로, 세로, 높이가 각각 60 cm, 100 cm, 45 cm인 폭발통을 사용하였으며 건물 내 가스폭발시 유리창 등이 파열되어 개구부가 발생되는 현상과 유사하도록 폭발통의 한쪽 측면에는 격막을 설치하여 폭발시 파열되도록 하였다. 실험 변수로는 LPG의 농도, 점화위치, 폭발시 발생하는 파구의 면적, 파열면으로부터 거리, 및 파열면의 강도등이며 연구결과, 폭발시 개구부가 생성되는 경우는 밀폐공간과는 달리 농도의 변화보다 파열면의 강도에 의해 폭발특성이 영향을 받으며 점화위치에 의한 폭발특성의 변화도 밀폐공간의 경우에 비해 크게 나타났다. 또한 파열면 개구부가 작을수록, 파열면의 강도가 클수록 파열압력(내부폭발압력)과 외부에 미치는 폭풍압력이 증가하였으며 파열면에서 멀어질수록 폭풍압력이 감소하는 현상들을 알 수 있었다.

  • PDF

가스 자동차의 지하 주차 시 위험성 분석 (A Study of Risk Analysis for Underground-parking of Gas Vehicle)

  • 이광원;김태훈;오동석;오영달;서두현;신수일
    • 대한안전경영과학회지
    • /
    • 제14권1호
    • /
    • pp.65-73
    • /
    • 2012
  • We studied the risk analysis of fire and explosion caused by gas leak in underground-parking of gas vehicle. However, an entrance regulation of gas vehicles (H2/LPG/CNG etc.) to underground garages has not been enacted in Korea. Incase, a gas explodes in an underground parking garage placed in overcrowded residential area, such as an apartment, the scale of the damage would cause tremendous disaster. Faults of vehicle parts and management problems were evaluated by using the Failure mode and effect analysis (FMEA), which is a qualitative analysis method. The range of the damaged area by the explosion and the damage scale by the explosion pressure were analyzed by using the process hazard analysis software tool (PHAST). The study is expected to facilitate enactment of the regulation for the underground parking to restrict the gas vehicle.

GIS를 활용한 화학물질 폭발사고 피해분석 연구 (A Study on the Damage Analysis of Chemical Substances Explosion Accident Using GIS)

  • 함태윤;권기민;송문수;윤홍식
    • 한국재난정보학회:학술대회논문집
    • /
    • 한국재난정보학회 2022년 정기학술대회 논문집
    • /
    • pp.99-100
    • /
    • 2022
  • 화학산업이 발전함에 따라 잠재적인 화학물질 폭발사고 위험 또한 증가하고 있다. 순식간에 치명적인 인명, 재산피해를 남기는 폭발에 대한 영향을 예측, 분석하기 위해 다양한 해석모델이 활용되고 있지만, 폭발의 물리적 특성상 다양한 형태의 건물이 밀집된 지역에 대해서는 해석모델 사용만으로 높은 정확도의 분석을 진행하기에는 어려움이 있다. 따라서 본 연구는 GIS 공간정보와 3D 폭발 시뮬레이션의 약결합 방식을 적용하였다. 실제 연구지역과 동일한 환경을 구현하여 시뮬레이션을 구동하였고 이에 따른 폭발 규모와 폭발에 노출된 대상별 가해지는 압력 값을 도출하였다. TNT를 기준으로 위험물 저장 및 취급시설에 대한 최저 기준인 지정수량 200kg을 적용하였음에도 최대 2,960kPa의 압력이 발생하는 것으로 확인되었다. 본 연구로 도출된 결과에 건축물의 용도와 중요도를 적용한다면 토지이용계획 및 공간활용에 반영할 수 있으며, 안전관리자로 하여금 리스크 평가, BC분석, 안전관리계획 수립 등에 활용 가능하다고 사료된다.

  • PDF

LNG 시험 플랜트의 정량적 위해도 평가를 위한 화재 및 폭발사고 해석 (Fire and Explosion Analysis for Quantitative Risk Assessment on LNG Test Plant)

  • 한용식;김명배;도규형;김태훈;최병일
    • 한국연소학회지
    • /
    • 제20권1호
    • /
    • pp.1-5
    • /
    • 2015
  • Fire and explosion analysis are performed for the quantitative risk assessment on the LNG test plant. From the analysis for a case of fire due to large leakage of LNG from the tank, it is obtained that loss of lives can be occurred within the radius of 60 m from the fire origin. Specially, wind can extend the extent of damage. Because the LNG test plant is not enclosed, the explosion overpressure is less than 6 kPa and the explosion has little effect on the integrity of the LNG test plant.

부탄 캔 파열로 인한 인체피해예측에 관한 연구 (A Study on Estimation of Human Damage Caused by Rupture of Butane Can)

  • 임사환;허용정;최성주;이종락;임동연
    • 한국안전학회지
    • /
    • 제22권3호
    • /
    • pp.98-104
    • /
    • 2007
  • 산업사회의 발전과 더불어 인간의 삶에 대한 욕구도 날로 급변하고 있으며, 주 40시간제가 도입되면서 피크닉을 즐기는 세대가 늘어나고 있는 실정이다. 또한 가스에 의한 사고는 토요일과 일요일에 가장 많이 발생하고 있다. 따라서 가스안전교육원에서는 이러한 가스의 폭발사고에 대한 영향이 매우 위험하다는 것을 교육생에게 알려 현장에서 가스안전관리에 만전을 기하도록 하고자 폭발실험을 실시하고 있다. 본 논문에서는 이러한 폭발실험으로 교육에 참관하는 교육생에게 미치는 영향을 알아보고자 폭발로 인한 과압은 Hopkinson의 삼승근법을 이용하여 계산하고, 인간에게 미치는 영향은 Probit 모델에 적용하여 사고피해예측을 평가하였다. 폭발위치에서 50m 떨어진 곳에서의 피크과압은 1.35kPa이고, 25m 떨어진 곳에서는 3.2kPa이다. 이 값은 Probit 모델에 적용하면 손상가능성이 0%로 나타났다.

밀폐공간에서 메탄 폭발사고의 최소 가스누출량 예측 (Estimate Minimum Amount of Methane for Explosion in a Confined Space)

  • 조영도
    • 한국가스학회지
    • /
    • 제21권4호
    • /
    • pp.1-5
    • /
    • 2017
  • 밀폐된 거주공간에서 주성분이 메탄으로 이루어진 천연가스 누출은 가연성 분위기를 형성여 폭발사고로 이어진다. 밀폐공간에서 폭발을 일으키기 위한 최소 매탄 누출양은 혼합정도에 크게 의존한다. 본 논문에서는 가우스분포모델과 폭발실험에 근거하여 폭발 사고가 발생할 수 있는 최소한의 메탄 누출량을 예측하기 위한 방법을 제시하고자 한다. 밀폐공간에서 높이에 따라 가연성가스의 농도분포는 가우스분포를 가지는 것을 가정하여 연소범위에 있는 가스의 최대량을 예측하고, 일정한 부피에서 예측된 가스가 연소되어 단열 또는 등온 혼합과정을 통하여 최종 폭발압력을 예측할 수 있다. 폭발사고에 의한 건물의 피해 정도에 대응하는 최소가스 누출양을 예측할 수 있다. 연구결과 건물 내 밀폐공간에서 아주 적은 양의 메탄가스가 누출되어도 심각한 폭발사고를 일으킬 수 있다. 이는 안전장치 개발에 있어서 적절한 조치를 취하기 전에 최소허용 가스 누출량을 설정하는 것에 유용하게 사용될 수 있을 뿐 만 아니라 폭발사고 조사에도 활용 될 수 있다.

Explosion induced dynamic responses of blast wall on FPSO topside: Blast loading application methods

  • Kang, Ki-Yeob;Choi, Kwang-Ho;Choi, Jae Woong;Ryu, Yong Hee;Lee, Jae-Myung
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제9권2호
    • /
    • pp.135-148
    • /
    • 2017
  • Topside areas on an offshore oil and gas platform are highly susceptible to explosion. A blast wall on these areas plays an important role in preventing explosion damage and must withstand the expected explosion loads. The uniformly distributed loading condition, predicted by Explosion Risk Analyses (ERAs), has been applied in most of the previous analysis methods. However, analysis methods related to load conditions are inaccurate because the blast overpressure around the wall tends to be of low-level in the open area and high-level in the enclosed area. The main objectives of this paper are to study the effects of applying different load applications and compare the dynamic responses of the blast wall. To do so, various kinds of blast pressures were measured by Computational Fluid Dynamics (CFD) simulations on the target area. Nonlinear finite element analyses of the blast wall under two types of identified dynamic loadings were also conducted.