• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.1
• /
• pp.38-44
• /
• 2015

In this paper, a finite element dynamic simulation study was performed to gain an insight about the blast wall test details for the offshore structures. The simulation was verified using qualitative and quantitative comparisons for different materials. Based on in-depth examination of blast simulation recordings, dynamic behaviors occurred in the blast wall against the explosion are determined. Subsequent simulation results present that the blast wall made of high energy absorbing high manganese steel performs much better in the shock absorption. In this paper, the existing finite element shock analysis using the LS-DYNA program is further extended to study the blast wave response of the corrugated blast wall made of the high manganese steel considering strain rate effects. The numerical results for various parameters are verified by comparing different material models with dynamic effects occurred in the blast wall from the explosive simulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.493-498
• /
• 2005

Underwater explosion shock response analysis of a MIL-S-901D Standard Floating Shock Platform(SFSP) was performed using LS-DYNA/USA, and the accuracy of analysis results was examined through the comparison of them with the existing test results. Surrounding fluid as well as the SFSP was included In a three dimensional finite element model for the consideration of the cavitation effects of UNOEX shock wave. It was confirmed that the analysis results could predict accurately the shock behaviors of the SFSP, and the response characteristics according to heavy weight shock tests could be figured out well.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1236-1238
• /
• 1993

This paper studies on the behaviors of decomposition products from DCP according to various drying conditions of DCP. The decomposition products formed during crosslinking reaction have an harmful influence on XLPE. Especially explosive gases like methane which is one of decomposition products may cause explosion accident. We used the Gas Chromatography and Gas sensor for decomposition gases analysis, FT-IR for investigating the behaviors of decomposition products remained in XLPE.

• Journal of KIISE:Software and Applications
• /
• v.37 no.9
• /
• pp.669-675
• /
• 2010

For detecting requirement errors in early system development phase, the behaviors of a system should be described in formal methods and be analyzed with analysis techniques such as reachability analysis and cycle detection. However, since they are usually based on explicit exploration of system state space, state explosion problem may be occurred when a system becomes complex. That is, the memory and execution time for exploration exponentially increase due to a huge state space. In this paper, we analyze the fundamental causes of this problem in concurrent systems and explore the state space without composing concurrent state spaces for reducing the memory requirement for exploration. Also our new technique keeps a visited history minimally for reducing execution time. Finally we represent experimental results which show the efficiency of our technique.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1988-1992
• /
• 2010

4-Amino-1,2,4-triazole copper complex (4-ATzCu) was synthesized, and its thermal behaviors, nonisothermal decomposition reaction kinetics were studied by DSC and TG-DTG techniques. The thermal decomposition reaction kinetic equation was obtained as: $d\alpha$ / dt =$10^{22.01}$ (1-$\alpha$)[-ln(1-$\alpha$)]$^{1/3}$ exp($-2.75\times10^4$ /T). The standard mole specific heat capacity of the complex was determined and the standard molar heat capacity is 305.66 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ at 298.15 K. The entropy of activation $({\Delta}S^{\neq})$, enthalpy of activation $({\Delta}H^{\neq})$, and Gibbs free energy of activation $({\Delta}G^{\neq})$ are calculated as 171.88 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ 225.81 $kJ{\cdot}mol^{-1}$ and 141.18 $kJ{\cdot}mol^{-1}$, and the adiabatic time-to-explosion of the complex was obtained as 389.20 s.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.61-73
• /
• 2003

Most of the accidents occurred from the chemical plants are related to the catastrophic gas release events when the large amount of toxic materials is leaked from its storage tank or transmitting pipe lines. In this case, the greatest concerns are how the spreading behaviors of leakages are depended on the ambient conditions such as air stability and other environmental factors. Hence, we have focused on the risk assessments and consequential analysis for chlorine as an illustrative example. As appeared in the result, Fire & Explosion Index depicted it a bit dangerous with presenting the comprehensive degrees of hazard 90.7. And as a result of Phast6.0/ALOHA, the trends of each scenario appeared considerably identical although there are some differences in the resulting effects according to the input data for the Gas Model. The consequence analysis is performed numerically based on the dense gas mode. In the future, using more correct input data, material properties, and topographical configuration, the method of this research will be useful for the guideline of the risk assessment when the release of toxicants breaks out.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.47-52
• /
• 2005

The wide use of metal dusts have been found in industrial field and many dust explosion accidents occur by fire spread of dust layer. In this study, we developed a new experimental device to examine fire and explosion characteristics of the dust layer. Aspects of the burning zone over metals(Mg, Zr, Ta, Ti, etc) and PMMA(Polymethyl methacrylate) dust layers have been investigated experimentally to clarify behaviors (Spread rate and quenching distance) and effects of $N_2$ surrounding gas on the fire spread over metal dust layers. From the experimental result, it was found that the spread rate of metal dusts is larger than PMMA, the dependability of spread rate over the thickness of dust layer is small, and the minimum oxygen concentration of spread flame over Mg dust layer is 3.6-3.7 vol%. Since high correlation between the spread rate and the reciprocal of quenching distance was seen, relative risk prediction in those inflammable parameters can be predicted.

• Journal of KIISE
• /
• v.44 no.11
• /
• pp.1178-1193
• /
• 2017

It is very important to understand system behaviors in collective pattern for each knowledge domain. However, there are structural limitations to represent collective behaviors because of the size of system components and the complexity of their interactions, causing the state explosion problem. Further composition with other systems is mostly impractical because of exponential growth of their size and complexity. This paper presents a practical method to model the collective behaviors, based on a new concept of domain engineering: behavior ontology. Firstly, the ontology defines each collective behavior of a system from active ontology. Secondly, the behaviors are formed in a quantifiably abstract lattice, called common regular expression. Thirdly, a lattice can be composed with other lattices based on quantifiably common elements. The method can be one of the most innovative approaches in representing system behaviors in collective pattern, as well as in minimization of system states to reduce system complexity. For implementation, a prototype tool, called PRISM, has been developed on ADOxx Meta-Modelling Platform.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.83-89
• /
• 1997

The behaviors of flame propagation and quenching ability in a pipe were investigated to make a design criteria of flame arrester. The effects of the number of wire gauzes and free area on the quenching ability were discussed. Experimental results showed that the flame velocity was important factor of the quenching ability. The flame velocity in case of closed pipe was increased about twenty times faster then that of opened. The quenching ability was increased about 10% with 3% decrease of free area and it was changed significantly by the sealing condition of the pipe end. The quenching flame velocity can be estimated by using experimental equations.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.771-776
• /
• 2007

Widespread propagation of failure can be triggered by localized damage to a structure because of fires, impact and explosion etc. In this paper, the progressive collapse analysis program is developed to automatically check the failed members and construct the modified structural model at each step. OpenSees, that is widely used in many research groups, was used for the developed progressive collapse analysis control program. The control program developed in this study automatically computes the damage indices of all the structural members and performance a progressive collapse analysis after the first failed member is selected. Using the developed program, we compared the progressive collapse behaviors of the example structures considering dynamic effects or not, and the difference of progressive collapse mechanism according to the modeling method of the failed members.