• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2023

The registration rate of eco-friendly vehicles, such as hydrogen vehicles, is increasing rapidly, however, few first responders have experienced related accidents. Accident scenarios at hydrogen refueling stations and hydrogen vehicles on a road were investigated, and the relative importance of each scenario was analyzed using AHP analysis. Leakage, jet flame, and explosion that occurred inside and outside the hydrogen refueling station were reviewed, and the hydrogen gas explosion in the compartment showed the highest importance value. In case of the hydrogen vehicle, traffic accident statistics and actual accidents were used. It was analyzed that the hydrogen vessel explosion on the road due to the failure of TPRD and the leakage in the underground parking area were difficult to respond. The developed accident scenarios are expected to be used for first responder training.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3479-3484
• /
• 2007

Two steam explosion experiments were performed in the TROI facility by using metal-added molten corium (core material) which is produced during a postulated severe accident in the nuclear reactor. A triggered steam explosion occurred in a case, but no triggered steam explosion did in the other case. The dynamic pressure and the dynamic load measured in the former experiment show a stronger explosion that those performed previously with oxidic corium. A steam explosion is prohibited when the melt temperature is low, because the melt is easily solidified to prevent a liquid-liquid interaction.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.8-14
• /
• 2016

A numerical analysis is conducted to estimate the core expansion and the energy behaviors induced by a core disruptive accident in a sodium-cooled fast reactor. The numerical formulation based on underwater explosion theory is carried out to simulate the core explosion inside the reactor vessel. The transient pressure, temperature and expansion of the core are examined by solving the equation of state and nonlinear governing equation of momentum conservation in one-dimensional spherical coordinates. The energy balance inside the computation domain is examined during the core expansion process. Heat transfer between the core and the sodium coolant, and the bubble rise during the expansion process are briefly investigated.

• Explosives and Blasting
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2016

On August 12, 2015, two huge explosions were accidently happened in Tianjin port, China. The explosion energies of the two explosions were similar to those of TNT 3 tons and TNT 21 tons. Until now, the cause of the explosions was not clearly announced but some guesses of the cause were released. One of the possible cause of the explosion is the generation of explosive acetylene gas from the chemical reaction between $CaC_2$ and spraying water to extinguish fire happened at the storage site of different chemical compounds. The explosion of acetylene gas might ignite the explosion of 800 tons of ammonium nitrate. In this study, the explosion due to the scenario was analyzed in order to check that such a chemical reaction can produce the huge explosion observed at the Tianjin accident.

• Journal of Aerospace System Engineering
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2012

Fuel tank design requires special care because tank explosion can cause catastrophic event with high possibility as shown in accident of TWA 800. In this study, cause of fuel tank explosion was reviewed and several design considerations to minimize explosion possibility were introduced.

• Journal of the Korean Society of Safety
• /
• v.3 no.2
• /
• pp.5-16
• /
• 1988

This study is conducted to evaluate the explosion of tolune storage tank in the petrochemical plant by Fault Tree Analysis. The conclusions are as follows; 1) Fault Tree diagram and the required computer program for evaluation of explosion accident is developed. 2) The probability of the top event, explosion accident, is $1.5\;{\times}\;10^{-8}$ per year, so there is almost no possibility of explosion during the life cycle of tank. However, the probability of Gate 6 and Gate 7 is 8.8 per month, therefore, attention should be paid to them for accident prevention. 3) The number of minimal cut sets is 67 sets which are not calculated the probability of each set, because of the lack of computer capacity. All the minimal cut sets should be examined case by case. However, it is necessary to be paid attention to COM1, 126, 131, and COM4 in minimal cut sets, because the number of appearance is so high. 4) The number path sets is 70 sets which are not calculated the probability of each set, because of the lack of computer capacity. It is very useful to prepare safety checklist by using this minimal path sets. Also, the events which appear many times, 123, COM5, 139, 127 and 128, are very high in reliability.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.51-56
• /
• 2011

Mixed gas cylinder(80% Ar, 20% $O_2$) exploded three years ago. But the cause of cylinder rupture was not identified and the case was finished. This paper is the discussions on the cause of cylinder explosion with the investigation report by the police and the similar accident cases. The cause of explosion is the chemical reaction in the cylinder. This accident is similar with the explosion of pressurized oxygen cylinder.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.661-668
• /
• 2017

The purpose of this study is to analyze the chemical reaction pathway for explosion accident of mixed cargo. The analysis used a structural scenario using event-tree analysis. Structural scenarios were constructed by estimating various chemical reaction paths in the content of the mixed cargo accident recorded in the written verdict. The analytical method was applied to three kinds of analysis: chemical analysis based on chemical theory, quantitative analysis using chemical reaction formula, and probabilistic analysis through questionnaire. As a result of analysis, the main pathway of the accident occurred in three ways: the path of explosion due to the reaction of concentrated sulfuric acid with water, the path of explosion due to the reaction of metal and mixed acid, and the path of explosion by synthesizing with special substances. This result is similar to the path recorded in the validation, and it leads to thar the proposed path analysis method is valid. The proposed method is expected to be applicable to chemical reaction path estimation of various chemical accidents.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.397-400
• /
• 2002

Vapor explosion is one of the most important problems encountered in severe accident management of nuclear power plants. In spite of many efforts, a lot of questions still remain. So, KAERI launched a real experimental program called TROI using $UO_{2}$ and $ZrO_{2}$ to investigate the vapor explosion. Besides TROI tests, a small-scale experiment with molten-tin/water system was performed to quantify the characteristics of vapor explosion and to understand the phenomenology of vapor explosion. A vapor explosion was observed while the amount of air bubble and water temperature were systematically varied The mass and temperature of tin are $50\;g\;and\;150^{\circ}C$, respectively. Water temperature is set to $24^{\circ}C\;and\;50^{\circ}C$. The void fraction of air bubble ranges from $0\;to\;10\;{\%}$. The strength of vapor explosion was measured using dynamic pressure sensors attached in reactor tube wall. as a function of void fraction. In addition, a high speed video filming up to 1,000 flame/sec was taken in order to visually investigate the behavior of the vapor explosion .

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.72-86
• /
• 2016

A steam explosion may occur during a severe accident, when the molten core comes into contact with water. The pressurized water reactor and boiling water reactor ex-vessel steam explosion study, which was carried out with the multicomponent three-dimensional Eulerian fuel-coolant interaction code under the conditions of the Organisation for Economic Co-operation and Development (OECD) Steam Explosion Resolution for Nuclear Applications project reactor exercise, is presented and discussed. In reactor calculations, the largest uncertainties in the prediction of the steam explosion strength are expected to be caused by the large uncertainties related to the jet breakup. To obtain some insight into these uncertainties, premixing simulations were performed with both available jet breakup models, i.e., the global and the local models. The simulations revealed that weaker explosions are predicted by the local model, compared to the global model, due to the predicted smaller melt droplet size, resulting in increased melt solidification and increased void buildup, both reducing the explosion strength. Despite the lower active melt mass predicted for the pressurized water reactor case, pressure loads at the cavity walls are typically higher than that for the boiling water reactor case. This is because of the significantly larger boiling water reactor cavity, where the explosion pressure wave originating from the premixture in the center of the cavity has already been significantly weakened on reaching the distant cavity wall.