• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1436-1439
• /
• 1990

Even though the concept "Adaptive" was introduced in the late 50's, the main contribution to adaptive and/or self-tuning control has been made since late 70's. This paper describes the feature of adaptive control simulation package KERICON(I) developed in KERI. Informations on hardware environments, install and testing of a new algorithm and user interfacings are also summarized. The package is written in C language and currently being updated for expert-type adaptive control package (KERICON II).RICON II).

• Journal of Food Hygiene and Safety
• /
• v.2 no.3
• /
• pp.137-148
• /
• 1987

The wholesomeness studies on irradiated foods and the evaluation of the data obtained have been conducted at both national and international levels. The conclusion of the FAO/IAEA/WHO Expert Committee on Wholesomeness of Irradiated Food in 1980 that irradiated foods treated with doses up to 10 kGy are safe for human consumption are being significantly influencing on the regulatory circumstances, in individual countries as well as a regional economic community. Principles of the wholesomeness evaluation, importance of radiation chemical considerations, methodology of toxicological testing and the interpretation of in vitro and in vivo toxicity studies are discussed. Emphasis is placed on the progress of methods for wholesomeness studies and data evaluations and also on the importance e of comparative assessments together with safety problems concerning other food treatments and environmental factors.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.121-135
• /
• 2014

Stone masonry structures are widely used around the world, but they deteriorate easily, due to low shear strength capacity. Many techniques have been developed to increase the shear strength of stone masonry constructions. The aim of this experimental study was to investigate the performance of stone masonry walls strengthened by metal connectors as an alternative shear reinforcement technique. For this purpose, three new metal connector (clamp) types were developed. The shear strength of the walls was improved by applying these clamps to stone masonry walls. Ten stone masonry walls were structurally tested in diagonal compression. Various parameters regarding the in-plane behavior of strengthening stone masonry walls, including shear strength, failure modes, maximum drift, ductility, and shear modulus, were investigated. Experimentally obtained shear strengths were confirmed by empirical equations. The results of the study suggest that the new clamps developed for the study effectively increased the levels of shear strength and ductility of masonry constructions.

• Korean Management Science Review
• /
• v.24 no.1
• /
• pp.147-160
• /
• 2007

Six Sigma's concept has long been used as an effective way of restructuring the management process of a firm. In literature regarding Six Sigma, a number of successful cases were reported, where Six Sigma based management activities could enhance firm's strategic performance dramatically for year. However, there exist very few researches investigating the effect of Six Sigma on process innovation and quality improvement. Therefore this study propose a research model testing whether Six Sigma innovation could improve process innovation and quality improvement by industrial classification. We collected 332 valid questionnaires from expert in Six Sigma activities, and applied PLS. Empirical results showed that Six Sigma activities could contribute to process innovation and quality improvement.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.313-319
• /
• 1997

There is currently a focus on usability of interactive computer software. Previous research in software ergonomics has indicated the importance of evaluating the usability of software user interfaces. Software developers, interface designers or human foctors engineers often confront the task of comparative evaluation among systems, versions or interface designs. This study presents a structured model for comparative evaluation of user interface designs using usability criteria and measures. The proposed model consists of twomain phases : the prescreening phase ad the evaluation phase. The first phase involves expert judgment-based approach with qualitative criteria. The prescreening phase uses absolute measurement analytic hierarchy process to filter possible altermative interfaces to a reasonable subset. The second phase involves user-based approach such as usability testing, with quantitative criteria. The objective of the evaluation phase is to evaluate a subset of altermatives using objective measures. A set of criteria and measures for evaluating the usability of computer software designs is presented. The proposed model provides practitioners with a structured approach to select the best interface based on usability criteria and measures.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1189-1192
• /
• 1996

In this paper, a fault diagnosis method is proposed for self-diagnostics of PLC(Programmable Logic Controller), process controller in industrial fields, and diagnosis of its external devices such as sensors and actuators. The aim of this research is proposition of systematic method of fault diagnosis of PLC control system and development of its equipment. A PLC fault diagnosis algorithm consists of self-diagnostics given by PLC makers, Inpuot/Output tracking method by analyzing sequence PLC programs, searching method of past fault cases in database using an expert system, and diagnosis of PLC units such as CPU, DI, and DO board. Finally usability of PLC fault diagnostic system is verified by testing a MELSEC PLC.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.110-116
• /
• 1994

In this research, the tensile strength of molded parts and pressure distribution were analyzed to study the cavity filling stage and packing stage in injection molding. The measurement of cavity pressure was obtained by a data acquisition system with the installation of transducers in the cavity. Molded parts were tested by a universal testing machine to obtain the tensile strength. For the experimental work, the tensile strength of molded parts increased with longer packing time and exact freezing time of the gate was obtained by a cavity pressure curve. In addition, the effect of packing did not occur and tensile strength was almost constant after early 1.5 sec of the freezing time of gate. Density tended to be higher about 0.2% due to a larger degree of mold temperature and melt temperature. Also, changing pressure in the cavity was effectively sensed. Thereafter, the possibility of the development of pattern recognition expert system was confirmed on the basis of the experimental results.

• Annals of Clinical Neurophysiology
• /
• v.23 no.1
• /
• pp.35-45
• /
• 2021

The utility and accuracy of intraoperative neurophysiological monitoring (IONM) has evolved greatly following the recent development of new devices for neurophysiological testing and advances in anesthesiology. Until recently, the need for IONM services has been limited to large academic hospitals, but the demand for neurophysiologists with expertise in IONM has grown rapidly across diverse types of hospital. The primary goal of the Korean Society of Intraoperative Neurophysiological Monitoring (KSION) is to promote the development of IONM research groups and to contribute to the improvement of fellowship among members and human health through academic projects. These guidelines are based on extensive literature reviews, recruitment of expert opinions, and consensus among KSION board members. This version of the guidelines was fully approved by the KSION, Korean Association of EMG Electrodiagnostic Medicine, the Korean Society of Clinical Neurophysiology, the Korean Academy of Rehabilitation Medicine, and the Korean Neurological Association.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.1
• /
• pp.27-33
• /
• 2009

In this study, we compared the alteration of test positions according to various test equipments when testing shoulder joint superoinferior axial to estimate the clinical usefulness of tiltable standing detector. Our objectives were patients who visited our hospital. Among them we chose patients who were prescribed to get a shoulder axial test, again we selected 30 patients whose abduction is more than 90 degree.(2008. Nov.$\sim$2009 Jan.) With the patients cooperation, we used CR(Agfa, Belgium), fixed-detector(Canon, japan), Tiltable-detector(Philips, Netherlands). Tested with only one equipment(tiltable detector), and posed with the other two. We surveyed 5 inspectors and 30 patients, asking them to rate the convenience of test position. Also, we checked how long it takes to have the image appear on screen after testing with the equipment We provided a standard for an assessment of the image to an expert in bone radiology, an orthopedist and a radiologist with 5 years experience. When the patients were asked about the convenience of the equipments, 15 people(50%) answered CR is convenient and 14 people(46.7%) answered the Tilting detector is convenient, showing not much difference. However, when the inspectors were asked the same question, 4people(80%) out of 5 answered that the Tilting detector is more convenient The time test showed that CR takes 2 minutes and 50 seconds, the Fixed detector 1minute and 48 seconds andor had no distortion showing the shoulder joint space. However, even though the Fixed detector showed ac the Tilting detector takes 1 minute and 43 seconds to bring the image to the screen after the position. The results of the value of image taken by each equipment, CR and the Tilting detectromion, coracoid process, due to the unstable pose, they were quite distorted and scored poor in observing glenoid fossa. By this study, we can see that testing the shoulder joint superoinferior axial projection with a detector that has a tilting device would be more convenient than testing it with a CR.

• Journal of Genetic Medicine
• /
• v.15 no.2
• /
• pp.72-78
• /
• 2018

Purpose: Physicians' attitudes may have a strong influence on women's decision regarding prenatal screening options. The aim of this study is to assess the physicians' attitudes toward prenatal screening for fetal aneuploidy including non-invasive prenatal testing (NIPT) in South Korea. Materials and Methods: Questionnaires were distributed and collected at several obstetrics-gynecological conferences and meetings. The questionnaire included 31 multiple choice and 5 fill-in-the-blank questions. Seven questions requested physicians' demographic information, 17 questions requested information about the NIPT with cell-free fetal DNA, and 12 questions requested information about general prenatal screening practices. Results: Of the 203 obstetricians that completed the survey. In contrast with professional guidelines recommending the universal offering of aneuploidy screening, only 53.7% answered that prenatal aneuploidy testing (screening and/or invasive diagnostic testing) should be offered to all pregnant women. Physicians tended to have positive attitudes toward the clinical application of NIPT as both primary and secondary screening methods for patients at high-risk for fetal trisomy. However, for patients at average-risk for fetal trisomy, physicians tended to have positive attitudes only as a secondary screening method. Physicians with more knowledge about NIPT were found to tend to inform their patients that the detection rate of NIPT is higher. Conclusion: This is the first study to investigate expert opinion on prenatal screening in South Korea. Education of physicians is essential to ensure responsible patient counseling, informed consent, and appropriate management after NIPT.