• Journal of Biomedical Engineering Research
• /
• v.41 no.2
• /
• pp.75-83
• /
• 2020

In large-scale hospitals, the department of biomedical engineering should always provide quick repair service for damaged medical devices to guarantee continuous patient treatment. However, in actual circumstances, there are so many time-consuming issues that delays device repair for weeks or even months; therefore, it is required to prepare alternative ways for quick repair service. In this study, we first mentioned about the regulation issues in Korea about the 3D printing-based medical device repair, and then introduced the results of our preliminary study that evaluated the feasibility of 3D printing-based medical device repair before real-field application. Results of the study demonstrated that, in all of the 23 cases, parts for repair that were manufactured by 3D-printing were successfully fixed and connected to the main body of the original device, and showed sufficient rigidity for protecting internal parts of the device. Considering the experimental results, medical device repair by applying 3D printing technology can be a promising alternative in cases when regular repair process is not available or takes too much time.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.49-57
• /
• 2010

This paper describes the design, construction, and fundamental testing of a precision rotational device that utilizes piezoelectric elements as a source of driving force and impact drive mechanism as a driving principle. A novel device structure is designed and the numerical simulations about the static displacement, stress distribution, and mode shape of the designed structure are performed. A fabricated rotational device has been rotated successfully by applying saw-shaped voltages to the piezoelectric elements. The one-step rotational angle was $0.44{\times}10^{-3}$ rad at the applied voltages of 80V. The angular velocities of the device were revealed to be increased as the driving frequency and voltage were respectively increased and the preload was decreased. The device has a feature that it can be translated as well as rotated. An experimental result shows that the device was translated by ${\pm}4.56{\mu}m$ maximum when the 120V sinusoidal voltages with a phase difference of $180^{\circ}$ were respectively supplied to two piezoelectric elements.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.64-67
• /
• 2004

The present study describes an experimental work to reduce supersonic jet noise using a control wire device that is placed into the supersonic jet stream. The jet pressure ratio is varied to obtain the supersonic jets which are operated in a wide range of over-expanded to moderately under-expanded conditions. The wire device is composed of long cylinders with a very small diameter. X-type wire device is applied to control the supersonic jet noise, and its location is varied to investigate the effect of the control wire device on supersonic jet noise. A high-quality Schlieren optical system is used to visualize the flow field of supersonic jet with and without the control wire device. Acoustic measurement is performed to obtain the overall sound pressure level and noise spectra. The results obtained show that the present wire device destroys the shock-cell structures, reduces the shock strength, and consequently leading to a substantial suppression of supersonic jet noise.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1479-1486
• /
• 2016

According to the advancement of display devices, the multi-screen contents display environment is growing to be accepted for the display exhibition area. The objectives of this research are to find communications technology and to design an editor interface of contents delivery system for the larger and adaptive multi-display workspaces. The proposed system can find existence of display devices and get information without any additional tools like marker, and can recognize device layout with only web-cam and image processing technology. The multi-display contents delivery system is composed of devices with three roles; display device, editor device, and fixed server. The editor device which has the role of main control uses UPnP technology to find existence and receive information of display devices. extract appointed color in captured picture using a tracking library to recognize the physical layout of display devices. After the device information and physical layout of display devices are connected, the content delivery system allows the display contents to be sent to the corresponding display devices through WebSocket technology. Also the experimental results show the possibility of our device connection and layout recognition techniques can be utilized for the large spaced and adaptive multi-display applications.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.854-859
• /
• 2006

This study aims to evaluate the effect on indoor environment by the application of the shading device on winter season. Therefore, thermal and visual experiments were conducted at two side-by-side mock-Lip test cells which were equipped with the shading device(venetian blind & roll blind) at interior and exterior side of the window. The results of this study are as follows: 1) At night of winter, the shading device can prevent internal heat from going out. 2) Exterior shading device is more effective in winter as well as in summer. 3) At daytime of winter, the shading device can provide the uniformity of illuminance, and the interior shading device is more effective.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.4
• /
• pp.637-645
• /
• 2013

PURPOSE: The purpose of this study was to examine the effect of using a suspension device for arm reaching activity on trunk stability and gross motor function of children with spastic diplegia cerebral palsy. METHODS: The subject in this study consisted of 11, GMFCS(Gross Motor Function Classification System) III~IV children with spastic diplegia cerebral palsy, all of whom agreed to participate in the study. All subjects were divided into two groups: the experimental group using a suspension device, and the control group using no suspension device. For each group, a thirty-minute intervention was done twice per week during 8 weeks. Before and after intervention, each test was measured using TIS(Trunk Impairment Scale), GMFM (Gross Motor Function Measure) and PRT(Pediatric Reaching Test) to change trunk stability, gross motor function and arm reaching activity. The data were analyzed with the Wilcoxon signed rank test. RESULT: All two groups had a meaningful increase in GMFM-Sit data measured before and after intervention. The experimental group had a significant increase from an average of 78.83 to an average of 84.83 in GMFM-Crawling. For both groups, there was a substantial increase in the change in sitting position and arm reaching. CONCLUSION: According to the results of this study, the arm reaching activity using suspension device had an effect on trunk stability and gross motor function and it changed arm reaching activity.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1823-1825
• /
• 2004

Spherically convergent beam fusion device accelerate ions, which are generated between outer anode and inner grid cathode, toward the spherical center. The collision of opposite direction ions give rise to fusion reactions. Spherically convergent beam fusion device is very simple and compact, therefore the device has a potential that is applied to a portable neutron source. An experimental device consist of a 20cm-diameter spherical mesh-type anode and 7cm-diameter open spherical grid cathode and was maintained at a constant pressure of about 1333 Pa by feeding argon gas.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.434-441
• /
• 2004

In this paper, an exoskeleton-type motion capturing system is designed and implemented. The device is designed to have 12 degree-of-freedom entirely to represent human arm motions. Forward and inverse kinematics of the device are analyzed to make sure of its singular positions. With the designed model parameters, simulation studies are conducted to verify that the designed motion capturing system is effective to represent human motions within the workspace. As a counterpart of the exoskeleton system, a mobile robot is built to follow human motion restrictively. Experimental studies of teleoperation from the exoskeleton device to control the mobile robot are carried out to show feasible application of wireless man-machine interface.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2753-2758
• /
• 2003

Tactile sensation is essential for many manipulation and exploration tasks not only in a real environment but also in a virtual environment. In this paper, we discuss a conceptual design of an integrated tactile display system. The system comprises two parts: a 2 DOF force feedback device for kinesthetic display and a tactile feedback device for displaying the normal stimulation to skin and the skin slip/stretch. Psychophysical experiments measure the effects of fingerpad selection, the direction of finger movements and the texture width on tactile sensitivity. We also investigate characteristics of lateral finger movement while subjects perceive different textures. From the experimental results, the principal parameters for designing a tactile display are suggested. A tactile display device is implemented using eight piezoelectric bimorphs and a linear actuator, and is attached to a 2 DOF translational force feedback device to simultaneously simulate texture and stiffness of the object.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.64-67
• /
• 2003

The authors have settled general modular design by analyzing related literatures, but general modular design are too massive to be applicable to all process devices. So, the common parts have to be selected, applied, and modified for the devices. We have chosen the dry pulverizing/mixing device for example. We have elected the target modules of this device such as flange, hinge, bolt, nut coupling. The remote assembling and disassembling possibilities of the selected modules have been analyzed from the viewpoints of visibility, interference, approach, weight and so on. We have presented final modular design proper to the target modules. The modular designs which have adopted the modular property been analyzed. The modular design points are comprised of common and unique points. Some points are common for several devices, such as bolt, flange and so on. Others are unique for each device, such as power transmission coupling. The experimental devices have been modified by these modular design points and the design drawings have been presented.