• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.473-478
• /
• 2009

The removal characteristics of total petroleum hydrocarbons (TPHs) and heavy metals in contaminated soils with ultrasonic washing have been studied. The ultrasonic washing was evaluated on a laboratory scale. In this investigation, the effects of factors such as ultrasonic frequency, power intensity, duration of irradiation, contents of the TPHs and heavy metals and mixing ratios between the contaminated soils and water, were considered. Experimental results suggested that the rates for contaminant extraction of the TPHs and heavy metals in the contaminated soil increased considerably with the ultrasonic washing. Therefore, the ultrasonic washing has previously been to be an effective method to remediate the contaminated soils with the TPHs and heavy metals.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3E
• /
• pp.109-114
• /
• 2005

In this paper, we present a phase coherent all-digital transceiver for underwater acoustic communication, which allows the system to reduce complexity and increase robustness in time variant underwater environments. It is designed in the digital domain except for transducers and amplifiers and implemented by using a multiple digital signal processors (DSPs) system. For phase coherent reception, conventional systems employed phase-locked loop (PLL) and delay-locked loop (DLL) for synchronization, but this paper suggests a frame synchronization scheme based on the quadrature receiver structure without using phase information. We show experimental results in the underwater anechoic basin at MOERI. The results show that the adaptive equalizer compensates frame synchronization error and the correction capability is dependent on the length of equalizer.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.96-101
• /
• 2004

When the wind blows hard, most waves are breaking in sea. Breaking waves occur, exceeding limitation of wave steepness(wave height/wave length=l/7). Because a wave of single angular frequency couldn't generate the breaking phenomena at two dimensional ocean engineering basin, the breaking wave can be generated by the superposition of waves with various angular frequencies. We research how are the particle kinematics in the breaking wave and the magnitude of the breaking wave exciting force. We compare the force in a regular wave which has same specifications(wave height, period and length) as the breaking wave. Also the experimental results of wave exciting force and particle velocity are investigated by comparison on the analytic results using the potential theory.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.102-107
• /
• 2004

New designed floating breakwater made of Polyethelener with considering the introduction of new material for being harmony with environment and stability of the floater is developed for a marine ranching. Model experiment in order to test its capability is performed for the regular and irregular waves in ocean engineering basin. Good capability to break the incident wave within the 6 second of period and 1 m of height is shown. Breaking efficiency for long period wave is not so good in regular and irregular wave. The results of this study will contribute to the design and construction of the floating breakwater.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2004

In this paper, the performance of a wave absorbing system using an inclined punching plate, was investigated. Using the multi-domain boundary element method (BEM), the reflection coefficients of an inclined punching plate were tested with various design parameters, such as inclined angle, porosity, and wave frequencies. To confirm the numerical solutions, the systematic model test was conducted at 2-D tank and square tank. The numerical results were in good agreement with the experimental results within the entire frequency range. It was found that an inclined punching plate had an excellent wave absorbing efficiency, compared to a horizontal one. Also, the optimal range of an inclined angle had an excellent wave absorbing efficiency, compared to a horizontal one the optimal range of the inclined angle is 10°<β<20°. The developed wave absorber was installed at KRISO's square basin, and is working effectively for various model tests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.351-358
• /
• 1998

This paper deals with the underwater image transmission system which includes in AUV(Autonomous Underwater Vehicle) Project(that is VORAM(Vehicle for Ocean Research And Monitoring)), developed by KIMM for survey and investigation of a sea-bed through transmitting the underwater image to the mother ship. The system presented in this paper consists of a transducer which has a 136KHz center frequency and it's 10KHz bandwidth, pre-amplifier, $\pi$/4 QPSK(Quadreature Phase Shift Keying) modulation/demodulation method, image compressing method using JPEG technique and modified Stop & protocol. The experimental results of the system is verified to a high performance with 9600 bps for transmitting the underwater image through the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation. And, the viterbi coding and adaptive equalizer for cancelling the multipath effect are developing for more effective image transmission system. Also, these technique will very effectively adapt to realtime image transmission system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.626-639
• /
• 2015

Ice resistance is defined as the time average of all longitudinal forces due to ice acting on the ship. Estimation of ship's resistance in ice-covered waters is very important to both designers and shipbuilders since it is closely related to propulsion of a ship and it determines the engine power of the ship. Good ice performance requires ice resistance should be as low as possible to allow different manoeuvres. In this paper, different numerical methods are presented to calculate ice resistance, including semi-analytical method and empirical methods. A model test of an icebreaking vessel that was done in an ice basin has been introduced for going straight ahead in level ice at low speed. Then the comparison between model test results and numerical results are made. Some discussions and suggestions are presented as well to provide an insight into icebreaking vessel design at early stage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.172-180
• /
• 2019

In this study, a ship motion control system design method is introduced for autonomous ships. Some related research results and technologies for autonomous ships have already been developed and applied to testing ships. Recently, the Norwegian Maritime Authority and the Coastal Administration have signed an agreement and started to test autonomous ships in the defined area. Considering recent technology trends and background, in this paper, the authors also try to develop autonomous ship control technologies. In the designed control system, an observer is introduced to estimate unmeasurable system states. Based on the servosystem with state estimator, ship motion control experiment is performed to evaluate control performance using a model ship in water basin.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.410-416
• /
• 2004

The objective of this investigation was to evaluate applicability of precoat filtration that can be substituted for rapid sand filter of conventional water treatment system(CWTS). Precoat filter used in this experiment are candle filter. Element disk of candle are pore size $10{\mu}m(R),\;20{\mu}m(B)$ And diatomaceous earth are cake pore size $3.5{\mu}m$(Standard Super- Cel; A), $7{\mu}m$(Hyflo Super-Cel; B) and $17{\mu}m$(Celite 545RV; C). $2kg/m^2$ diatomaceous earth is used for precoating, it coated candle in $5{\sim}6mm$ thickness. 1. Al adsorption dosages by diatomaceous earth used in experimental we Hyflo Super-Cel 0.843mg/g, Standard Super-Cel 0.782 mg/g and Celite 545RV 0.766 mg/g. 2. Filtrate of precoat filter during 60min are R-C combination 20.7($m^3/m^2$)>B-C 18.3($m^3/m^2$)>B-B 15.0($m^3/m^2$)> R-B 12.9($m^3/m^2$)> R-A 11,093($l/m^2$). 3. Water quality of precoat filter effluent are thus. $KMnO_4$ consumption are $1.10{\sim}2.20mg/l$, removal rate are $30.9{\sim}65.6\%$. They are R-A 1.10(mg/l)(removal rate $65.6\%$). R-C(2.20 mg/l)(removal rate $30.9\%$). 4. $Al^{3+}$ are not detected with all combination, removal rate $100\%$. 5. Considering water quality and flux, continued running time of R-A combination is 7 hr. Accumulated filtrate are $74.4 m^3/m^2$, average flux is $177.2 l/m^2{\cdot}min$. And filtrate per diatomaceous earth 1g are 37.2 l. 6. R-A effluent's water quality are $KMnO_4$ Consumption 1.10(mg/l), DOC 1.161 mg/1, Al 0.0 mg/1, $UV_{254}$ 0.016/cm, Turbidity 0.1(NTU). R-A combination is suitable to precoat filtration for the settling basin effluent treatment.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.383-394
• /
• 2006

This study is for the inundation damage analysis caused by levee break, and for the applicability of GIS tool to make inundation map in the Jungrang stream basin which is one of the representative urbanized area in Korea. The FLDWAV was applied to the actual flood in 1998 to calibrate the parameters, and was used under the flood conditions of 100, 200 years and PMF for the analysis of inundation caused by the levee breach. As the conditions of the levee break, the duration of break(10, 30, 60 min), the width of break(10, 20, 30m) and the location of the break are considered. We found out that the range and the volume of the inundation are strongly influenced by the location of the levee break, the break width in order. And, we compared the two processes of making the inundation map using WMS and ArcView model. The Process 1 which use only WMS has the benefit by its simplicity but there could be considerable errors in making the inundation map, while Process 2 where the ArcView model is introduced to WMS has the capability of making detailed topography map but needs more process time. This study could contribute to levee breach flood analysis and making flood map to establish the EAP(Emergency Action Plan) in the urban basin.