• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.320-325
• /
• 2020

This study aimed to analyze thermo-keeping and economic feasibility by utilizing silica aerogel, which has been attracting attention as a new material, complementing the disadvantages of the conventional multi-layered thermal screen, and producing and installing multi-layered thermal screen. The multi-layered thermal screen used in the experiment was produced in two combinations using a non-woven fabric containing silica aerogel and measured and compared the temperature and fuel consumption changes due to differences in practice with the multi-layered thermal screen being sold and used on the market. Experimental results show that the temperature and relative humidity changes due to the differences of the multi-layered thermal screens in the single-span greenhouse and the multi-span greenhouse were small but remained almost the same temperature and relative humidity. It is judged that this shows that the multi-layered thermal screen using silica aerogel is not inferior to the conventional multi-layered thermal screen. As a result of a comparative analysis of heating energy, the aerogel-based multi-layered thermal screen reduced fuel consumption by about 15% in the single-span greenhouse and about 20% in the multi-span greenhouse compared to the conventional multi-layered thermal screen. It is clear that heating energy is saved as a greenhouse size and duration increase. It was found that the silica aerogel-based multi-layered screen was more breathable and warmer than the conventional multi-layered thermal screen, but It was found that the multi-layered screen used in the multi-span greenhouse was heavier and stiff compared with the conventional multi-layered thermal screen, indicating less workability and operability. Therefore, improvements were applied to the multi-layered screens used in the single-span greenhouses. It was confirmed that the replacement of internal insulation materials reduced thickness and improved stiffness so that there could be sufficient possibility for farmers to use.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.1-4
• /
• 1970

To study the varital response of grain, protein and oil yield to different sowing dates and calcium levels in soybean, the most important crop as a protein source in Korea, this experiment was conducted in 1969. Three leading soybean varieties (Choongbukbaek, Ryooku＃3 and Changdanbaekmok) were sown at May 22,, June 11 and July 1 under 3 different calcium levels, 0.50 and 100kg per 10a respectively. The results are summarized as follows: 1. Ryonku ＃3 showed the highest grain yield because of the highest number of pods per hill. In order of protein content, and oil content of grain, Choongbukbaek>Ryooku＃3>Changdanbaekmok and Changdanbaekmok>Choogbukbaek>Ryooku＃3 were found. Ryooku＃3 also showed the highest protein and oil production per unit area owing to the highest grain yield. However. varietal differences of the grain yield the protein and the oil production per unit area varied along the different sowing dates. Interactions between varieties and sowing date on the grain yield should be considered in practice. 2. No difference in the grain yield was found between the first sowing date (May22) and the second (June11) on average. The grain yield in the plot of the third sowing date (July l)was strikingly decreased mainly by the smaller number of pods per hill. The protein and the oil content were not varied significantly by the different sowing dates. The protein and oil production per unit area were lowest in the plot of the third sowing date owing to the decreased grain yield. 3. More calcium application increased the number of branches per hill, the number of pods per hill, and the grain yield. The highest grain yield was found in the plot received 100 kg of calcium hydroxide per 10are. Protein content increased in higher calcium level, but oil content was highest in the plot of noncalcium. More protein production per unit area was gotten by more calcium application because of higher grain yield and protein content. all production increased in higher calcium level by the increased grain yield. 4. High plus (+) correlation was found between stem length and stem weight per hill stem length and grain weight, stem length and grain yield, stem weight per hill and number of pods per hill and grain weight, number of branches per hill and grain weight, number of pods per hill and grain yield, and grain weight and protein content of grain. Minus(-) correlation was recognized between number of pods per hill and grain weight.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.230-235
• /
• 2015

The experiment was conducted to elucidate the growth characteristics of sorghum in the different planting methods: direct sowing and transplanting (20 days after sowing, DAS). Weed weight was taken from three randomly chosen-2 plots 60 DAS (DAT). One time (20, 30 days after transplanting, DAT) and two times (10/20, 10/30, 20/30, 20/40 DAS) application of weeder machine (FRT 80E) were conducted for direct sowing and transplanting, respectively. In transplanting, the weed control efficacy of weeder machine at 90 DAT was about 67% (DAT 20), 57% (DAT 30) at one time and 87% at two times. The most effective application number was two times (20/40 DAT) followed by one time (20 DAT). However, when reviewing yield and economy, the frequency and times of using weeder machine were preferably one time and 20 DAT. Results with mechanical weed control have been particularly good in transplanted row crops such as sorghum. In direct sowing, the weed control efficacy of weeder machine 60 DAS was about 87% (10/20 DAS), 88% (10/30 DAS) and 82% (20/30 DAS) at two times, respectively. When reviewing yield and economy, the times and frequency of weeder machine were preferably two times, 10 and 30 DAS.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.196-203
• /
• 1999

To establish the best rice cultivating system in the aspects of environment-loving agriculture, the amounts and patterns of nitrogen leached in the paddy soil were investigated with 7 treatments; Recommendation(R), Farmer's usual practice(FUP), Straw compost+chemical fertilizers reduced(SCF), Fresh straw+recommendation(FSC), Fresh cow manure(FCM), Cow manure compost(CMC), and no fertilization as Control(C). And SCF, FCM and CMC were applied with same amounts of total nitrogen to R. The infiltrated water samples were collected in ceramic porous cups which were buried at 60cm depth from the top. Concentrations of nitrate-N in irrigated water were $1.3mg\;l^{-1}$ on rice transplanting season when nutrients began to elute from paddy soil, and $0.4mg\;l^{-1}$ after breaking off irrigation. But it was $4-6mg\;l^{-1}$ in rice growing period. The maximum concentration of nitrate-N in leachate was not more than $7mg\;l^{-1}$ during rice cultivation. The amounts of nitrogen leached in R, FUP, SCF, FSR, FCM, CMC and C were 59, 63, 25, 41, 24, 27, $17kg\;ha^{-1}y^{-1}$ respectively. Nitrogen leaching was decreased to about 30% by supplement of fresh rice straw(FSC) to R. Furthermore, it was possible to reduce to over 50% of nitrogen leaching by reducing chemical fertilizer application(CF), or by substituting of chemical fertilizers with fresh cow manure(FCM) or cow manure compost(CMC). In added organic fertilizer treatments, the amounts of infiltrated nitrogen were less $13-46kg\;ha^{-1}y^{-1}$ than that of input by irrigation. This experiment showed that nutrients leaching was minimized by substitution of chemical fertilizers with organic fertilizer or by application of straw with chemical fertilizers in rice paddy soil and rice cultivation with suitable fertilizer management can work as a purifier rather than contaminator of water.

• Journal of Korean Academy of Nursing
• /
• v.7 no.1
• /
• pp.63-72
• /
• 1977

The Purposes of this study are to determine differences of body temperature between Right arid left subligual areas itself and differences depending upon the utilization rate of mastication according to time intervals and to determine the length of time necessary for temperature taking. This Experiment was conducted from Oct 6 through Oct 11, 1975. in which accurately tested clinical Centigrade Thermometers have been utilized. Two thermometers were inserted simultaneously under the right and left sublingual areas and the mouth kept closed while thermometers were in Place. Temperature readings were dr no at three minutes, five minutes and ten minutes. These procedures were repeated one hundred times to different subjects and the data were analyzed statistically by means of the t-test and the F-ratio. Under the 10 hypotheses designed for this study, The findings obtained are as follows; 1. The body temperatures taken at 3, 5, 10minutes intervals in the left sublingual areas were significantly higher than in the right sublingual areas , The average differences of body temperature between the right and left sublingual areas were 0.09$^{\circ}C$, 0.05$^{\circ}C$ and 0.03$^{\circ}C$ in the oder of time interval of 3, 5, and 10 minutes. 2. The body temperatures taken in the right sublingual areas among three different temperature readings, 3, 5 and 10 minutes were significantly different in 57 subjects who have been utilizing evenly both sides of the Teeth. The average readings in a group taking for 3 minutes was 37.04$^{\circ}C$, for 5 minutes 37.15$^{\circ}C$ and for 10minutes 37.28$^{\circ}C$. 3. The body temperatures taken in the left sublingual areas among three different temperature readings, 3, 5 and 10 minutes were significantly different in 57 subjects who have been utilizing evenly both sides of the tenth. The average reading in a group taking for 3 minutes was 37.13$^{\circ}C$, for 5 minutes 37.2$^{\circ}C$ and for 10 minutes 37.31$^{\circ}C$. 4., Oral temperatures taken at 3, 5, 10 minutes intervals at the side of mouth utilized for more frequent mastication were Significantly higher than the other side. The average differences of body temperature between more frequently utilized side and Less frequently utilized side were 0.08f, 0.08f and 0.09f in the order of time interval of 3, 5 and 10 minutes. 5. Oral temperature taken at the side of mouth more frequently utilized for mastication among three different temperature readings, 3, 5 and 10 minutes were significantly different in 43 subjects who have been unequally utilizing either side of teeth. The average reading in a group taking for 3 minutes was 37.09$^{\circ}C$, for 5 minutes 37.17$^{\circ}C$ and for 10 minutes 37.3$^{\circ}C$. 6. Oral temperature taken at the side of mouth less frequently utilized for mastication among three different temperature readings 3, 5 and 10 minutes were significantly different in 43 subjects who have been unequally utilizing either side of teeth. The average reading in a group taking for 3 minutes was 37.01$^{\circ}C$, for S minutes 37.09$^{\circ}C$ and for minutes 37.21$^{\circ}C$. As a result of this study, these differences among time intervals were statistically significant, but there were not so much differences as to be considered important in the clinical practice. Therefore, there would be clinically little difference between two groups who are taking for 3 minutes and for 10 minutes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.2
• /
• pp.136-141
• /
• 2013

Lowering tree height has been a key practice for efficient management of persimmon orchards. This experiment was conducted to assess whether fertilization rates could be reduced after lowering the tree height by heavy pruning. Twelve-year-old 'Uenishiwase' persimmon trees were lowered to 2 m from over 3 m by severe dormant pruning, and then conventional fertilization rate was applied to some trees in April (N 224 g, $P_2O_5$ 172 g, and $K_2O$ 172 g per tree), June (N 112 g and $K_2O$ 99 g per tree), and October (N 112 g and $K_2O$ 99 g per tree). At the same time, 1/3 or 2/3 of the conventional rate and none were applied to other trees, respectively. Non-application decreased shoot length and reduced number of unnecessary secondary shoots by 39% compared with the conventional rate, not affecting yield and weight, color, firmness, and soluble solids of fruits. No significant difference was also found in the yield and the fruit characteristics among the trees fertilized with different rates. Concentrations of soluble sugars, starch, N, and K of dormant shoots in March of the following year were not significantly changed by the different treatments of the previous year. There was no significant difference of shoot growth and yield among the treatments the following year when the same fertilization rate was supplied to all the trees. Results indicated that fertilization rate could be reduced to less than 1/3 of conventional rate to save the cost and stabilize shoot vigor when tree height is lowered by severe pruning.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.847-852
• /
• 2011

Green manure crops are mainly used to reduce the application of chemical fertilizers. Mixture of green manure crops have beneficial effects in agroecosystem. In this study, experiments were conducted to evaluate the effects of monoculture and mixtures of crimson clover (Trifolium incarnatum) on rice growth and yield in paddy. This experiment was conducted at Sinheung series (fine loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts) from Oct. 2007 to Oct. 2009 at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Korea. Seeding rates of crimson clover (CC) were consisted of monoculture (CC2, 3, 4 kg and hairy vetch 5 kg $10a^{-1}$) and mixtures (CC 2 + barley 7, CC 3 + barley 7, CC 4 + barley 7, and CC2 + hairy vetch $5kg\;10a^{-1}$). Seeds were drilled by partial tillage machine on 9th Oct. in 2007. Monoculture and mixture of crimson clover as a green manure crop was incorporated in soil for rice cultivation on 15th May in 2008. Chemical fertilizers had not been applied to monoculture and mixture plots. The biomass and N production of monoculture plots were lower than mixture plots. The biomass and N production of CC 2 + hairy vetch $5kg\;10a^{-1}$ plot were the highest among mixtures treatments. In rice growing season, ammonium nitrogen concentrations in soil were a little high trends at CC 2 + hairy vetch $5kg\;10a^{-1}$ plot. And soil bulk density and porosity were improved at mixture plot after rice harvesting. The rice yield of CC 2 + hairy vetch $5kg\;10a^{-1}$ plot was not significantly different from conventional practice plot. These results indicated that cropping of crimson clover with hairy vetch mixture was better than barley mixture for environmental friendly rice cultivation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.85-94
• /
• 2007

To determine the influence of food waste compost (FWC) application on paddy soil, FWC was applied to the paddy soil and then compared with farmer's practice as to the effects on rice and soil environment. Initially, pig manure compost (PMC) had high content of phosphorus ($15g\;kg^{-1}$) and potassium ($23g\;kg^{-1}$), while FWC had high content of total nitrogen ($13g\;kg^{-1}$) and salinity ($18.5g\;kg^{-1}$). Comparison was also made between chemical fertilizer and FWC use as a trial in the paddy field under the clay loam and sandy loam soil. In the panicle formation stage, chemical fertilizer application was proper in clay loam while PMC application was proper in sandy loam. However, chemical fertilizer produced higher yield compared to compost treatment, both on clay loam and sandy loam with 20~25% and 17~19%, respectively. The lower yield in sandy loam maybe due to slow mineralization of compost such that the crop did not effectively use it. Organic matter content in paddy soil after experiment was higher in FWC and PMC plots compared to that in chemical fertilizer plots. But the other soil properties were comparable. Therefore, the FWC compost had little effect on soil when it use as a trial in paddy field. Likewise, after the application of FWC as a trial, analysis of nitrate nitrogen and ammonium nitrogen in the surface water and 60 cm depth of paddy soil water nine days after planting was done. Results revealed that concentration of ammonium nitrogen was similar to irrigation water while nitrate nitrogen concentration was not detected, and hence did not contribute to water pollution. It is concluded that the application of FWC in the paddy field had not affected on environmental pollution in the paddy field. But its use as compost during rice culture reduced yield quantity. Such study should include selection of compost material, amount and method of compost application.

• Knowledge Management Research
• /
• v.22 no.3
• /
• pp.273-293
• /
• 2021

Due to the COVID-19 pandemic, the size of the e-commerce has been increased rapidly. This pandemic, which made contact-less communication culture in everyday life made the e-commerce market to be opened even to the consumers who would hesitate to purchase and pay by electronic device without any personal contacts and seeing or touching the real products. Consumers who have experienced the easy access and convenience of the online purchase would continue to take those advantages even after the pandemic. During this time of transformation, however, the size of information source for the consumers has become even shrunk into a flat screen and limited to visual only. To provide differentiated and competitive information on products, companies are adopting AR/VR and steaming technologies but the reviews from the honest users need to be recognized as important in that it is regarded as strong as the well refined product information provided by marketing professionals of the company and companies may obtain useful insight for product development, marketing and sales strategies. Then from the consumer's point of view, if the ratings of reviews are widely diverged how consumers would process the review information before purchase? Are non-converged ratings always unreliable and worthless? In this study, we analyzed how consumer's regulatory focus moderate the attitude to process the diverged information. This experiment was designed as a 2x2 factorial study to see how the variance of product review ratings (high vs. low) for cosmetics affects product attitudes by the consumers' regulatory focus (prevention focus vs. improvement focus). As a result of the study, it was found that prevention-focused consumers showed high product attitude when the review variance was low, whereas promotion-focused consumers showed high product attitude when the review variance was high. With such a study, this thesis can explain that even if a product with exactly the same average rating, the converged or diverged review can be interpreted differently by customer's regulatory focus. This paper has a theoretical contribution to elucidate the mechanism of consumer's information process when the information is not converged. In practice, as reviews and sales records of each product are accumulated, as an one of applied knowledge management types with big data, companies may develop and provide even reinforced customer experience by providing personalized and optimized products and review information.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.1
• /
• pp.27-32
• /
• 2022

Purpose When performing a whole-body bone scan, many patients are experiencing psychological difficulties due to the close distance to the detector. Recently, in the medical field, there is a report that using virtual reality (VR) equipment can give pain relief to pediatric patients with weak concentration or patients receiving severe treatment through a distraction method. Therefore, in this paper, VR equipment was used to provide psychological stability to patients during nuclear medicine tests, and it is intended to evaluate whether it can be used in clinical practice. Materials and Methods As VR equipment, ALLIP Z6 VR (ALLIP, Korea) was used and the experiment was conducted after connecting to a mobile phone. The subjects were 30 patients who underwent whole-body bone examination from September 1, 2021 to September 30, 2021. After intravenous injection of 99mTc-HDP, 3 to 6 hours later, VR equipment was put on and whole body images were obtained. After the test, a survey was conducted, and a Likert scale of 5 points was used for psychological anxiety and satisfaction with VR equipment. Hypothesis verification and reliability of the survey were analyzed using SPSS Statistics 25 (IBM, Corp., Armonk, NY, USA). Results Anxiety about the existing whole-body bone test was 3.03±1.53, whereas that of anxiety after wearing VR equipment was 2.0±1.21, indicating that anxiety decreased to 34%. When regression analysis of the effect of the patient's concentration on VR equipment on anxiety about the test, the B value was 0.750 (P<0.01) and the t value was 6.181 (P<0.01). decreased and showed an influence of 75%. In addition, overall satisfaction with VR equipment was 3.76±1.28, and the intention to reuse was 66%. The Cronbach α value of the reliability coefficient of the questionnaire was 0.901. Conclusion When using VR equipment, patients' attention was dispersed, anxiety was reduced, and psychological stability was found. In the future, as VR equipment technology develops, it is thought that if the equipment can be miniaturized and the resolution of VR content images is increased, it can be used in various clinical settings if it provides more realistic stability to the patient.