• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.352-359
• /
• 2010

Stability of twin tunnels depends on the pillar width and the ground condition. In this study, large scale model tests were conducted for investigating the influence of the pillar width of twin tunnels on their behavior in the regular horizontal jointed rock mass. Jointed rocks was composed of concrete blocks. Pillar width of twin tunnels varied in 0.29D, 0.59D, 0.88D and 1.18D, where D is the tunnel width. During the test, pillar stress, lining stress, tunnel distortion, and ground displacement were measured. Lateral earth pressure coefficient was kept in a constant value 1.0. As a result, it was found that the pillar stress and the displacement of the ground and tunnel were increased by decreasing pillar width. The maximum displacement rate was measured just after the upper excavation in each construction sequence. And the maximum influence position was the right shoulder of the preceeding tunnel at the pillar side. It was also found that for the stability assessment the inner displacement was more critical than the crown displacement. The influence zone was formed at the pillar width 0.59D~0.88D that was smaller than 0.8D~2.0D, which was proposed by experience for a good ground condition. And it would be concluded that horizontal joints could also influence on the stability of the twin tunnels.

• Journal of Gifted/Talented Education
• /
• v.22 no.4
• /
• pp.893-916
• /
• 2012

This research investigates gifted students' mothers' rearing stress based on the concept mapping method. For this, 12 gifted students' mothers solicited, gathered and analyzed related statements, and then did multidimensional scaling and hierarchical cluster analysis. The stress value was .273 which was appropriate for the two level concept mapping study. In addition 101 mothers of gifted students rated for the rearing stresses they experience. Results were as follows. First, 79 concrete statements were solicited and as a result of concept mapping were categorized as 'burden and conflict as mothers of the gifted', 'possible negative characteristics due to the giftedness', and 'self-esteem and pressure by the title of the gifted'. Especially following items showed relatively high average: worrying about how to give the child a specific help for his/her career(M=4.65); worrying that she might be intervening too much in their child's behaviors(M=4.60); getting pressured supporting the child to get involved in the gifted education system continually(M=4.46); worrying if her child is not developing his/her talent enough due to the lack of time and money(M=4.44); being concerned that her high expectations might be putting her child under too much pressure (M=4.43). Implications of the study related to gifted education practices were discussed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.4
• /
• pp.273-287
• /
• 2001

In this paper, we introduce our experience for designing and implementing a media manager in the Integrated Streaming Service Architecture (ISSA) developed by the authors. The media manager is regarded as a necessary module in the ISSA framework for the following reasons. It realizes that from which locations of the media source devices, the media streams are coming. Once it knows where the origin is, the media manager should recognizes what types of stream are. After that, it performs how to chose an appropriate CODEC to handle the recognized input streams efficiently, and what type of media playback device should be selected. In order to do such a job efficiently, the proposed media manager consists of two modules source module and sink module. The major role of a media source module is to make an abstraction for the media streams that are coming from various types of media device. This, in consequence, enables a media manager to consistently handle tlle media streams without considering wherever they come from. On the other hand, the media sink module distributes the input streams to an appropriate media device to playback. One of the remarkable virtues of the proposed media manager is an ability to supporting high value-added database services since it provides an interface between the ISSA and real-time multimedia database. Also, it provides the RTP!RTSP source filter and Winamp gateway modules which allow the flexibility to the system. Moreover, the media manager can adopt any types of new media which in fact will provide scalability to the ISSA.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup2
• /
• pp.300-308
• /
• 2001

Objectives : Anterior cervical discectomy and interbody fusion has become a well-accepted surgical treatment of degenerative cervical diseases. Implatable cages have a stabilizing effect without plates and no need for autogenous bone graft. The authors evaluates the effect of implatable titanium cage(RABEA) on the clinical and radiological outcomes. Methods : 34 patients with symptomatic cervical degenerative diseases due to one level disc pathology were underwent anterior cervical discectomy and interbody fusion with titanium cages(RABEA) which were not filled with cancallous bone grafts from January 1999 to May 2001. Patients with osteoporosis and older than 65 years were not included. Among them, 15 patients could be followed-up for at least 1 year. The authors retrospectively reviewed the charts and radiographic data. Mean follow-up period was $1.3{\pm}0.2years$. Results : Clinical results according to the Odom's criteria was exellent and good in 14(93%) patients. One patient with fair result showed complete loss of the disc space height due to settlement of the cage. Preoperatively, the mean height of the disc space(${\pm}$standard deviation) was $3.42{\pm}1.10mm$(range 2.0-5.5mm), and at 1 day postoperatively it was $7.88{\pm}0.90mm$(range 6.50-9.0). The mean height of the disc space after 1 year was $6.50{\pm}1.38mm$(range 3.0-8.0). The restoration of the height was statistically significant(p<0.05). The mean height after 1 year was $82.7{\pm}15.9%$ of the height at 1 day postoperatively. Preoperatively the mean value of the cervical lodortic angle was $21.8{\pm}11.8^{\circ}$ and 1 year postopertively, it was $24.5{\pm}8.3^{\circ}$, which was statistically not significant. All patients showed no abnormal movements on flexion and extension lateral film after 6 months. Conclusion : Implantable titanium cages appear safe and effective in selected patients, and their use helps to avoid complications associated with bone graft harvest. Subsidence of the cage seems to be a potential risk factor for recurrence of the symptoms. For long-term results, a longer follow-up is required.

• Journal of KIISE:Software and Applications
• /
• v.32 no.7
• /
• pp.601-611
• /
• 2005

Due to not only proven stability and reliability but a significant investment and years of accumulated -experience and knowledge, legacy systems have supported the core business applications of a number of organizations over many years. While the emergence of Web-based e-business environments requires externalizing core business processes to the Web. This is a competitive advantage in the new economy. Consequently, organizations now need to mine the business value buried in the legacy systems for reuse in new e-business applications. In this paper we suggest a systematic approach to mining components that perform specific business services and that consist of the legacy system's assets to be leveraged on the modem platform. The proposed activities are divided into several tasks. First, use cases that realize the business processes are captured. Secondly, a design model is constructed for each identified use case in order to integrate the use cases with the similar functionalities. Thirdly, we identify component candidates from the design model and then adjust the component candidates by considering common elements among the candidate components. And also business components are divided into three more fine-grained components to deploy them onto J2EE/EJB environments. finally, we define the interfaces of components which provide functionalities of the components as operations.

• Journal of Korean Classical Literature and Education
• /
• no.33
• /
• pp.45-82
• /
• 2016

Class, the fundamental unit of school education and the meeting place of teacher and students, plays an important role in study of the subject matter of education. Class criticism is material to the theory or method that helps researchers deeply understand and analyze class phenomena or teachers' actions during a class. In this study, I make a critique on the features of a classic novel class as attempt to expand on new prospects in the field of research on classical literature education. The classic novel class in this class criticism is typical one, which reads the work analytically. Nevertheless, the teacher turns the students' vague repulsion into empathy and helps them appreciate and internalize the work. Students' empathy and response are reflected in the interpreting-centered class because the teacher's insights about the work and experience, knowledge, and method of literature education are projected during the class. Especially, a situation in which the teacher spends a relatively long time narrating the background of the work clearly shows the value and meaning disseminated in a classic novel class. Based on the aforementioned, attempts to collect a variety of cases of a classic novel class and to understand the meaning of these cases have to be part of future research. The research on the attributes of a class such as criticism of classic novels enables us to renew introspection to discover classical literature education.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.607-619
• /
• 2019

This study used Natural Monument water spiders and their habitats as educational contents, so those students could have a scientific literacy and the beautiful memories of Eundaeri's marshes through developing a virtual fieldwork courses (VFC) and observing the ecology of water spiders. In order to develop the program, the 2015 revised national curriculum and its textbooks were analyzed. In accordance with the STEAM model, we developed teaching-learning materials for 7 classes. Students produced 3D panorama virtual fieldwork courses (PVFC) about water spider by team-based cooperative learning, enabling them to emotionally experience the meaning and value of water spiders. A panel of six education experts verified the validity of the program and found it to be fairly valid at 4.24 (CVI = .88) on the 5-point Likert scale. In order to confirm the suitability of the program, students in the middle school science clubs participated in pilot testing camp. Their average classes satisfaction was 4.24 and students were very satisfied with the usefulness of the program, the fresh learning contents, and the suitability of the convergence education class. This study could contribute to convergence education related to ecology and virtual reality for adolescents.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.513-523
• /
• 2021

The purpose of this study was to discuss the required items and feasibility of medical records of radiological examinations performed by radiological technologists at medical institutions. An online survey was conducted to a total of 10,000 radiation-related workers, of which 1,026 (10.3%) responded. As a research method, self-made questionnaires were used. The online survey was conducted from September 10 to September 20, 2021 for the survey period. For response data, a Chi-square test was performed according to demographic characteristics using SPSS 27.0 version (IBM Inc., Chicago, Ill, USA), and it was judged to be significant when the P value was less than 0.05. The reliability of the questionnaire response was found to be Chronbach α=0.933. More than 90% of the medical records related to radiological examinations are necessary, and they answered that a curriculum, remuneration curriculum, and legal system for medical records should be prepared. More than 90% of the respondents agreed with the proposal of the Radiological Technologist Independent Act for legal preparation, and most of the information required for medical records is currently recorded in DICOM images. According to the demographic characteristics, the medical record requirement for radiological examination, curriculum, continuing education, and legislation were found to be higher with higher education and higher with longer working experience. In addition, most of the radiology departments showed a high demand for medical records, so most of them responded positively to the medical records requirements for radiological examinations. This study analyzed the medical record requirements for radiological examinations, and as shown in the results, medical record requirements for radiological examinations was found that most radiological technologists felt need for the new law and supported it. In addition, if the information recorded in the DICOM image is used, it is considered that medical records could be easily prepared without additional work by the radiological technologists.

• Journal of Korea Trade
• /
• v.24 no.1
• /
• pp.82-98
• /
• 2020

Purpose - This study aims to overcome the limitations of existing studies, which linearly determine the precedence factors of competency in overseas subsidiaries. The research objectives are as follows. First, what kind of nonlinear effects does the level of control held by Korean headquarters over foreign subsidiaries have in terms of competency in the subsidiaries? Second, what kind of nonlinear effects do the local experiences of overseas subsidiaries have on their competency? Design/methodology - With data on Korean multinational corporations (MNCs), this paper analyzes the effects of control levels of headquarters (HQs) and host-country experiences of foreign subsidiaries regarding competency in overseas subsidiaries. In particular, this study focuses on nonlinear models, differentiating it from previous studies. In order to examine research hypotheses, this study conducted a survey of overseas subsidiaries of Korean corporations. Surveys were conducted through various methods including e-mail, online questionnaires, fax, and telephone calls. Copies of the questionnaire were distributed to a total of 2,246 overseas subsidiaries, and 409 completed responses were collected. Excluding 15 copies that were insufficiently answered, responses from a total of 394 copies were used for analysis. Findings - This study presents the following results. First, there is a U-shaped relationship between levels of HQ control and competency in foreign subsidiaries. This means that higher levels of HQ control negatively impact the competency levels of subsidiaries because strict control undermines autonomy in subsidiaries. However, if the level of HQ control exceeds a certain point, then the transfer of knowledge between HQs and subsidiaries is facilitated. Knowledge transferred from HQs can be used as prior knowledge by foreign subsidiaries to the benefit of all parties. Accordingly, knowledge transfer negates the negative effects of excessive HQ control and positively affects competency in subsidiaries. Second, there is an inverted U-shaped relationship between the local (host-country) experiences of subsidiaries and competency in foreign subsidiaries. This means that foreign subsidiaries can overcome the liabilities of foreignness and contribute to capability building by accumulating unique knowledge about their host countries. However, if local experiences accumulate excessively beyond a certain point, then the host country-specific experiences of foreign subsidiaries will offset the benefits discussed above. Excessive local experiences not only increase organizational inertia, but also create a problem of goal incongruence due to information asymmetry between HQs and subsidiaries. Therefore, excessive local experiences have negative effects on competency in foreign subsidiaries. Originality/value - This study suggests the following implications. First, unlike existing studies based mainly on linear models, this study presents important theoretical implications in its focus on nonlinear models and its analysis of the effects of HQ control and local experiences on competency in foreign subsidiaries from perspectives of organizational learning theory and agency theory. Second, in terms of practical implications, the results of this study suggest that optimally raising levels of HQ control and managing the local experiences of subsidiaries without increasing organizational inertia is important for enhancing competency in foreign subsidiaries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.115-123
• /
• 2021

In recent years, the automobile industry has been facing a major change with the introduction of new technologies represented by autonomous driving, electrification, and digitalization. Major domestic and overseas automakers are trying to use a systematic approach to customer satisfaction through user interfaces to provide customers with a special experience and value beyond just making products with high performance. This study proposes the Kano model as a systematic and qualitative research method for satisfaction. As a case study, 17 functions of a product were sorted (3 operation functions, 7 safety functions, and 7 convenience functions). This was done by analyzing the use case and the customers' requirements for a smart trunk system. 18 new functions were derived via creative ideation codes. In addition, a scientific analysis method is proposed for product quality attributes and the strength of customer satisfaction. Using the Kano methodology, 25 functions were classified into quality attributes: 18 attractive qualities, 3 one-dimensional qualities, and 4 complex qualities, which are combinations of one-dimension qualities and must-have qualities. The functions that have one-dimensional quality and complex qualities were found to have higher customer ratings than the functions that have attractive qualities. Based on this, enterprises could effectively reduce customer complaints and enhance customer satisfaction.