• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.24-30
• /
• 1998

A directly coupled Boundary Element and Finite Element Model was applied to the dynamic analysis of a coupled acoustic silencer with vibratory wall. In this cupled BEM-FEM muffler model, the BEM model was used to discretize the acoustic cavity and the FEM model was used to discretize the vibratory wall structure. Then the BEM model was coupled with the FEM model. The results of the coupled BEM-FEM model for the dynamic analysis of the simple expansion type reactive muffler configurations with flexible walls were verified by comparing the predicted results to analytical solutions. In order to investigate the effects of the muffler's structural flexibility on its transmission loss(TL) characteristics, the results of the coupled BEM-FEM model in conjunction with the four-pole parameter theory were utilized. The muffler's TL characteristics using the BEM-FEM coupled model with flexible walls as compared to other muffler configurations was studied. Finally the muffler's TL values with respect to different wall's thickness are predicted and compared.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.2 s.13
• /
• pp.53-59
• /
• 2004

The mechanism of manhole bursting which occurs at excess rainfall events Is studied by using both the physical model and the numerical model (SWMM ; Storm Water Management Model). The result of numerical simulation to steep pressure rising agrees well with that of the physical model at the sewer system under surcharged flow. A cause of manhole bursting is an expansion and spout of the condensed all at manhole that results from the surcharged flow and press wave propagation caused by gate operation or closure of conduit at pumping station.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.11-18
• /
• 2004

In this paper, an efficient model reduction scheme is presented for large scale dynamic systems. The method is founded on a modal analysis in which optimal eigenvalue is extracted from time samples of the given system response. The techniques we discuss are based on classical theory such as the Karhunen-Loeve expansion. Only recently has it been applied to structural dynamics problems. It consists in obtaining a set of orthogonal eigenfunctions where the dynamics is to be projected. Practically, one constructs a spatial autocorrelation tensor and then performs its spectral decomposition. The resulting eigenfunctions will provide the required proper orthogonal modes(POMs) or empirical eigenmodes and the correspondent empirical eigenvalues (or proper orthogonal values, POVs) represent the mean energy contained in that projection. The purpose of this paper is to compare the reduced order model using Karhunen-Loeve expansion with the full model analysis. A cantilever beam and a simply supported plate subjected to sinusoidal force demonstrated the validity and efficiency of the reduced order technique by K-L method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.423-433
• /
• 2004

A large eddy simulation (LES) is performed for turbulent flow in a combustion device. The combustion device is simplified as a cylindrical chamber with sudden expansion. A flame holder is attached inside a cylindrical chamber in order to promote turbulent mixing and to accommodate flame stability. The turbulent sub-grid scale models are applied and validated. Emphasis is placed on the evaluation of turbulent model for the LES of complex geometry. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The calculated Reynolds number is 5000 based on the bulk velocity and the diameter of inlet pipe. The predicted turbulent statistics are evaluated by comparing with the LDV measurement data. The Smagorinsky model coefficients are estimated and the utility of dynamic SGS models are confirmed in the LES of complex geometry.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.595-608
• /
• 1998

A diffuser an important equipment to change kinetic energy into pressure energy has been studied for a long time. Though experimental and theoretical researches habe been done the understanding of energy transfer and detailed mechanism of energy dissipation is unclear. As far as numerical prediction of diffuser flows are concerned various numerical studies have also been done. On the contrary many turbulence models have constraint to the applicability of diffuser-like flows with expansion and streamline curvature. In order to obtain the reliability of k-$\varepsilon$ turbulence model modified combination turbulence models composed of the anisotropic k-$\varepsilon$model modified combination turbulence models composed of the anisotropic k-$\varepsilon$ model with Hanjalic-Launder's preferential normal strain and Pope's vortex stretching mechanism are proposed. The results of the present proposed models prove the fact that the coefficient of pressure and the shear stress are well predicted at the diffuser flow.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.23-32
• /
• 2004

A spatial simulation model for rural and urban sprawl phenomena was developed with GIS and cellular automata techniques. The model finds out built-up areas invading toward rural areas required for development of existing urban area. Probability of land use change for optimizing the development area was determined using a land suitability analysis method interfaced with GIS methods, based on several criteria in terms of geographic and accessibility factors such as slope of land and distance from city center. Weighting values of the criteria were quantified by an analytic hierarchy process method. For model applicability test, the parameters of criteria were calibrated based on the changes in time series land use data of the test city for 1986, 1996, and 2000, which were classified by remote sensing techniques. Simulated and observed areas in land use maps for city shape of 1996 showed good similarities with each other through a morphology verification method. The model enabled us to evaluate the spatial expansion phenomena of cities considering boundary conditions, and also to simulate land use planning for rural areas in urban fringe.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1079-1088
• /
• 2001

A dynamic simulation model was developed to analyse the transient characteristics of a multi-inverter heat pump. The programs included a basic air conditioning system such as a evaporator, condenser, compressor, linear electronic expansion valve (LEV) and by-pass circuit. The theoretical model was derived from mass conservation and energy conservation equations to predict the performance of the multi-inverter heat pump at various operating conditions. Calculated results were compared with the values obtained from the experiments at different operation frequencies of compressor, area of the LEV and configuration of indoor units operation. The results of the simulation model showed a good agreement with the experimental ones, so that the model could be used as an efficient tool for thermodynamic design and control factor design of air-conditioners.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.2
• /
• pp.229-237
• /
• 2021

Objective : Expansion in the spinal canal area (SCA) after laminoplasty is one of the critical factors to relieve the preoperative symptoms. No previous study has compared the increases in SCA achieved by open-door laminoplasty (ODL) and double door laminoplasty (DDL) according to the preoperative lamina angle (LA). This study was designed to clarify the relationship between the laminoplasty opening angle (OA)/laminoplasty opening size (OS) and increases in the SCA following ODL and DDL according to the preoperative LA using a simulation model. Methods : The simulation model was constructed and validated by comparing the clinical data of 64 patients who had undergone C3-C6 laminoplasty (43 patients with ODL and 21 patients with DDL). SCA expansion was predicted with a verified simulation model at various preoperative LAs (from 28° to 32°) with different OAs (40° to 44°) and OSs (10 mm to 14 mm) recruited from patient data. Results : The constructed simulation model was validated by comparing clinical data and revealed a very high degree of correlation (r=0.935, p<0.001). In this validated model, at the same OA, the increase in SCA was higher following ODL than following DDL in the usual LA (p<0.05). At the same OS, the increase in SCA was slightly larger following DDL than following ODL, but the difference was not significant (p>0.05). The difference was significant when the preoperative LA was narrower or much wider. Conclusion : Based on clinical data, a simulation model was constructed and verified that could predict increases in the SCA following ODL and DDL. When applying this model, prediction in SCA increase using the OS parameter was more practical and compatible with clinical data. Both laminoplasties achieved enough SCA, and there was no significant difference between them in the usual range.

• Journal of Korean Academy of Nursing
• /
• v.32 no.6
• /
• pp.855-866
• /
• 2002

The purpose of study is to develop a home nursing care project model suitable for Korea's heath care system and policy directions for expansion and establishment of home nursing care. Method: The first, status of home nursing care program in medical institution and public health center was evaluated respectively in view of structure, process and performance. And then, issues of the program were analyzed in view of accessibility, safety, and sufficient supply. The second, demand projection of home nursing care according to income level and technical level of service that is needed to the subject was tried. In addition, the level of supply for home nursing care at present was estimated. The third, home nursing care program in advanced countries (Japan and U.S.A.) was examined. Result and Conclusion: Community-based home nursing care program is developed into public-operation model and private-operation model from above the sub-subject result. Functional network for referral system among related institutions is built up to meet various needs, regardless of accessibility to distance and economy. And prior settlements and policy directions for expansion and establishment of home nursing care are suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.275-281
• /
• 2010

In this paper, a geometric similarity law is introduced to the performance test of a large-sized silencer used in ship engine or plant system. A test of scale-down model enable to yield the cost and time saving in developing large-sized silencer considerably. Two types of silencer, resonator and expansion chamber, were analyzed by a theoretical method and an acoustical FEM(finite element method) in order to obtain geometric similarity variables. A method is proposed to estimate the transmission loss of prototype model using the test results of scale-down model. Two actual large-sized silencer, which consist of resonator and expansion chamber, were analysed by an acoustical FE analysis. Consequently, the proposed method predicts effectively the performance of prototype silencers using those of scale-down models.