• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.117-127
• /
• 2016

In this study, analyzed scenarios of the environmental instream flow for water quality improvement in Saemangeum watershed. In order to get an environmental instream flow, Methodology is selected for Retention-Basin, reservoir expansion, new dam construction, Modification of water intake and drainage system, Rearrangement of plan for system which Yongdam and Seomjin river dam have been used water supply. The study composed of diverse scenario of Environmental instream flow increasement and analyzed the effect of improving the water quality by the QUAL2K model and calculation of runoff for saemangeum watershed by SWAT model. The following water quality indicators have been simulated in irrigation and non-irrigation period for BOD and T-P. When scenarios applied to water quality model, Improvement rate in the water quality for Total Maximum Daily loads of Mankyung B unit watershed during irrigation and non-irrigation period is BOD (28.70%), T-P (17.09%) and BOD (28.51%), T-P (28.68%) respectively. Dongjin A unit watershed during irrigation and non-irrigation period is BOD (14.39%), T-P (14.59%) and BOD (15.54%), T-P (19.46%) similary. Simulation results is to quantify the constribution of the improvement in the water quality. In particular, It was demonstrative that improving effect for water quality was evaluated to be great in non-irrigation period.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.77-86
• /
• 2001

As construction and expansion of wastewater treatment works is continuing, generation of sludge is increasing. Bur most sludge is not used appropriately but disposed by landfill dumping to sea. Furthermore direct landfilling of sludge cake containing moisture content over 75% has been legally prohibited since 2001 that's enforcement will be more strict in 2003. Such a situation means nowadays recycling of organic waste such as sludge and food waste is necessary. Composting is one of recycling methods commonly and used as an effective means of stabilizing organic waste and then compost can be used as fertilizer. However fertilizer law management which include standard of compost products and other fertilizers applied all sludge products indiscriminiately and was not flexible. So MOE has graded organic composts according to land applications to improve recycle of organic wastes. The classified organic compost which contains low contaminants has been possible to use as various purpose. This study enalyzed 30 samples which were raw materials for compost and compost products management well and to estimate the quality of compost products. Heavy metals were measured in Raw materials and OM/N, NaCl and VS were tested in compost products as well as heavy metals. As a result, approximate 10% of raw materials was not suitable to the grade A and 6.7% over the grade B of the regulation on raw materials for compost. In the case of 30 produced compost propducts approximate, 57% of composts was not compatible with the grade A and B of the regulation on composting product. The qualities of compost products were worse than raw materials, because the compost products have more regulation item raw materials have.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.92-101
• /
• 2007

Urban freight system includes not just intra-urban freight movement but also inter-urban movement as well. Hence, to make Busan a hub of North-east asia freight movement it is necessary to develop a comprehensive plan for infrastructure expansion as well as improvement of freight system based on the present facility situation. This study identifies the status of freight facilities in Busan by establishing the freight related infrastructure Database(DB) utilizing Geographic Information System(GIS), and to enable planners and decision-makers to utilize the DB to develop a future plan. The DB includes port facilities, major and minor arterial roads, railroad lines and facilities, depots, center city business areas, and urban infrastructures which are related to the freight movements. The analyses show that major transportation facilities in Busan consist of roads, railroads, coastal transportation, and international transportation, and it was found that intermodal facilities are inadequate for freight system in Busan. The results of this study will be useful for freight experts and planners to develop a comprehensive freight system plan.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.527-538
• /
• 2020

This research measures the urgency and importance listening to experts' opinions as a proposal for vitalization of folk modern dance groups. Firstly, the open type FGI(Focus Group Interview) was implemented for five groups of an expert by applying the new industry foster theory, and total 24 types of second questionnaire were developed through importantly referred or repeated contents. They were distributed to 20 people including a dance group representative, a planner, a university professor and etc to measure experts' importance and urgency. In the research result, For big list, Financial aid for both importance and urgency appear first, and for comparative analysis of importance and urgency for small list, differences in infrastructure construction are shown. "expansion of dance program's advertisement channels" and "rank 1" appeared in "Secure space for dancers". Suggestions for analyzing such results are as follows. It is shown that "detailed financial aid for the operation of dance groups" and etc in the aspect of financial aid, "the employment of professional human resources including design and producing etc" in that of performance and education related production development, "training a dancer who can assimilate a complex genre" in that of manpower training, "arrangement of exclusive space for a dance group" in that of infrastructure building, and "the employment of professional human resources including design and producing etc" in that of consulting support are important and urgent matters considered by experts.

• Journal of Home Health Care Nursing
• /
• v.3
• /
• pp.75-85
• /
• 1996

Nursing Intervention Classification(NIC) includes the 433 intervention lists to standardize the nursing language. Efforts to standardize and classify nursing care are important because they make explicit what has previously been implicit, assumed and unknown. NIC is a standardized language of both nurse-initiated and physician-initiated nursing treatments. Each of the 433 interventions has a label, definition and set of activities that a nurse does to carry it out. It defines the interventions performed by all nurses no matter what their setting or specialty. Principles of label, definition and activity construction were established so there is consistency across the classification. NIC was developed for following reasons; 1. Standandization of the nomen clature of nursing treatments. 2. Expansion of nursing knowledge about the links between diagnoses, treatments and outcomes. 3. Devlopment of nursing and health care information systems. 4. Teaching decision making to nursing students. 5. Determination of the costs of service provided by nurses. 6. Planning for resources needed in nursing practice settings. 7. Language to communicate the unigue function of nursing. 8. Articulation with the classification systems of other health care providers. The process of NIC development ; 1. Develop implement and evaluate an expert review process to evaluate feedback on specific interventions in NIC and to refine the interventions and classification as feedback indicates. 2. Define and validate indirect care interventions. 3. Refine, validate and publish the taxonomic grouping for the interventions. 4. Translate the classification into a coding system that can be used for computerization for articulation with other classifications and for reimbursement. 5. Construct an electronic version of NIC to help agencies in corporate the classifiaction into nursing information systems. 6. Implement and evaluate the use of the classification in a nursing information system in five different agencies. 7. Establish mechanisms to build nursing knowledge through the analysis of electronically retrievable clinical data. 8. Publish a second edition of the nursing interventions classification with taxonomic groupings and results of field testing. It is suggested that the following researches are needed to develp NIC in Korea. 1. To idenilfy the intervention lists in Korea. 2. Nursing resources to perform the nursing interventions. 3. Comparative study between Korea and U.S.A. on NIC. 4. Linkage among nursing diagnosis, nursing interventions and nursing outcomes. 5. Linkage between NIC and other health care information systems. 6. determine nursing costs on NIC.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.5-21
• /
• 2014

It has been pointed out that the collapses of unsaturated road embankments caused by earthquake are attributed to high water content caused by the seepage of the underground water and/or the rainfall infiltration. Hence, it is important to study influences of water content on the dynamic stability and deformation mode of unsaturated road embankments for development of a proper design scheme including an effective reinforcement to prevent severe damage. This study demonstrates dynamic centrifugal model tests with different water contents to investigate the effect of water content on deformation and failure behaviors of unsaturated road embankments. Based on the measurement of displacement, the pore water pressure and the acceleration during dynamic loading, dynamic behavior of the unsaturated road embankments with about optimum water content and the higher water content than the optimum one have been examined. In addition, an image analysis has revealed the displacement field and the distributions of strains in the road embankment, by which deformation mode of the road embankment with higher water content has been clarified. It has been confirmed that in the case of higher water content the settlement of the crown is large mainly owing to the volume compression underneath the crown, while the small confining pressure at the toe and near the slope surface induces large shear deformation with volume expansion.

• Korean Journal of Social Welfare
• /
• v.66 no.3
• /
• pp.159-183
• /
• 2014

This study is to deeply investigate the process experience of making the local organization with the supervisors and the social workers-in-field with the research question, 'how is the project process of community building leaded by community welfare centers'. For this, 6 community welfare centers were selected among 22 ones participated in the public contest of Seoul Welfare Foundation, and 15 line workers including the top supervisors working there were selected as the research participants and interviewed. The interview source materials of research participants were analyzed using the method of consistent comparison of Strauss and Corbin(1996). According to the result of the research, the project process of community building leaded by community welfare centers indicated 4 phases such as 'the step of change of recognition', 'the step of mutual communication', 'the step of cooperation expansion', and 'initiative construction'. With the result of this study, I supposed political and practical tasks for promoting that local residents voluntarily build the community and the change of paradigm that is community welfare centers for local residents. Also, this study will be relevant that the result of this study is offered as base line data for extending theoretical and practical discussion about building community depending on characteristic of community and community welfare centers.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.231-238
• /
• 2017

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.

• Spatial Information Research
• /
• v.9 no.1
• /
• pp.73-89
• /
• 2001

In the recent rapidly changing technology environment the computerization of administration business using GIS is driven or will be driven to give improved information services for the people by local government or central government with huge budget. Development of GIS for local governments is investigated with huge budge. Development of GIS for local governments is investigated to prevent local government from investing redundant money and to reuse the existing investment at this time. The purpose of this study is finding the development method of Land Management Information System (LMIS) to give service and share data in various computing environment of local governments. To do this, we have to develop LMIS as open system with interoperability and we explain it with a focus to framework of Open LMIS. According to recent trend of technology we developed Open LMIS for convenient maintenance with nationwide LMIS expansion at hand. This system was developed at the $\ulcorner$Land Management Information System Development$\lrcorner$project which was managed by Ministry of Construction and Transportation (MOCT). GIS application was based on OpenGIS CORBA specification for development of standard interface and RUP(Rational Unified Process) for development method and LML(Unified Modeling Language) for system design. Developed systems were land administration system for local government, spatial planning support system for regional government, and land policy support system for MOCT.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.37-47
• /
• 2016

The practical constraints on the commercial FPGAs which contain dedicated wide function multiplexers in their slice structure are incorporated with one of the most advanced FPGA mapping algorithms based on the AIG (And-Inverter Graph), one of the best logic representations in academia. As the first step of the mapping process, cuts are enumerated as intermediate structures. And then, the cuts which can be mapped to the multiplexers are recognized. Without any increased complexity, the delay and area of multiplexers as well as LUTs are calculated after checking the requirements for the tree construction such as symmetry and depth limit against dynamically changing mapping of neighboring nodes. Besides, the root positions of multiplexer trees are identified from the RTL code, and annotated to the AIG as AOs (Auxiliary Outputs). A new AIG embedding the multiplexer tree structures which are intentionally synthesized by Shannon expansion at the AOs, is overlapped with the optimized AIG. The lossless synthesis technique which employs FRAIG (Functionally Reduced AIG) is applied to this approach. The proposed approach and techniques are validated by implementing and applying them to two RISC processor examples, which yielded 13~30% area reduction, and up to 32% delay reduction. The research will be extended to take into account the constraints on the dedicated hardware for carry chains.