• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.128-137
• /
• 1997

In this study, examined influence of consolidation effect that had affected by location of pump inlet that was set collection well for drainage of pore water discharged by embankment on soft ground through the field test. The results of this study are summarized as follows; 1 Initial consolidation curve value were larger than theoritic value, the cause of these phenomena were thought influence of secondary consolidation and three dimensional strain of soft clay. 2. The settlement value of Hosino method was larger than that of Hyperbolic method, but settlement value of Hyperbolic method was accurate more than that of Hosino method in the prediction of settlement. 3. When pump inlet in collection well came down from GL+O.3m to GL-1.5m, settlement value increased about 10cm and when the ground water level was made insitu after pumping had completed , settlement was expanded about 7~8cm. So it is found that location change of pump inlet bad an influence on settlement remarkably. 4. If location of pump inlet in collection well for large scale estate or wide road site is lowered than original ground level, the settlement will be accelerated effectively, and at this stage automatic pump must be used in pumping.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.38-39
• /
• 2017

This paper proposes a new control method for an AC-DC Buck converter which is utilized as a front-end converter of a 2-stage high power density adapter. In the conventional adapter applications, 2-stage configuration shows higher power transfer efficiency and higher power density than those of the single stage flyback converter. In the 2-stage AC-DC converter, the boost converter is widely used as a front-end converter. However, an efficiency variation between high AC line and low AC line is large. On the other hand, the proposed conduction band control method for a buck front-end converter has an advantage of small efficiency variation. In the proposed control method, switching operation is determined by a band control voltage which represents output load condition, and an AC line voltage. If the output load increasesin low AC line, the switching operation range is expanded in half of line cycle. On the contrary, in light load and high line condition, the switching operation is narrowed. Thus, the proposed control method reduces switching loss under high AC line and light load condition. A 60W prototype which is configured the buck and LLC converter with the proposed control method is experimented on to verify the validity of the proposed system. The prototype shows 92.16% of AC-DC overall efficiency and 20.19 W/in 3 of power density.

• The Journal of Information Systems
• /
• v.30 no.3
• /
• pp.47-64
• /
• 2021

Purpose This study measures the degree of improvement in statistical quality experienced by data users when the data of a more convenient measurement method is extended to the analysis target to improve the quality of fine dust statistics service, and the method of expressing analysis data is revised. Ultimately, the main purpose is to explore how it can affect the quality of life of citizens. Design/methodology/approach As it was an issue the emerged as the most important issue at the time, various parties (government, private company, academia, civic groups, etc.) conducted multifaced research on fine dust, but they all focused on measuring technology and demonstrating its effectiveness there was only. This researcher redesigned the study from the viewpoint of statistical data users by changing the research subject from the technology itself to user, different from the existing research cases. The questionnaire method and structural equation were used in the study, and fine dust statistics generated through the existing method and the expanded/revised method were provided and compared for a total of 200 people. Findings Based on the results of the study, I would like to suggest what each entity should ultimately focus on to resolve the fine dust issue in the future.

• Structural Engineering and Mechanics
• /
• v.91 no.2
• /
• pp.227-238
• /
• 2024

Sparse regularization methods have proven effective in addressing the ill-posed equations encountered in moving force identification (MFI). However, the complexity of vehicle loads is often ignored in existing studies aiming at enhancing MFI accuracy. To tackle this issue, a double 𝑙₁ regularization method is proposed for MFI based on a response spectrum-based weighted dictionary in this study. Firstly, the relationship between vehicle-induced responses and moving vehicle loads (MVL) is established. The structural responses are then expanded in the frequency domain to obtain the prior knowledge related to MVL and to further construct a response spectrum-based weighted dictionary for MFI with a higher accuracy. Secondly, with the utilization of this weighted dictionary, a double 𝑙₁ regularization framework is presented for identifying the static and dynamic components of MVL by the alternating direction method of multipliers (ADMM) method successively. To assess the performance of the proposed method, two different types of MVL, such as composed of trigonometric functions and driven from a 1/4 bridge-vehicle model, are adopted to conduct numerical simulations. Furthermore, a series of MFI experimental verifications are carried out in laboratory. The results shows that the proposed method's higher accuracy and strong robustness to noises compared with other traditional regularization methods.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1239-1247
• /
• 2009

Study the gene about economical characteristic of human disease or domestic animal is a matter of grave interest, preserve and elevation of gene of Korea cattle is key subject. Studies have been done on the gene of Korea cattle using EST based SNP map, but it is based on statistical model, therefore there are difference between real position and statistical position. These problems are solved using both EST_based SNP map and Gene on sequence by Lee et al. (2009b). We have used multifactor dimensionality reduction(MDR) method to study interaction effect of statistical model in general. But MDR method cannot be applied in all cases. It can be applied to the only case-control data. So, method is suggested E-MDR method using CART algorithm. Also we identified interaction effects of single nucleotide polymorphisms(SNPs) responsible for average daily gain(ADG) and marbling score(MS) using E-MDR method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.908-911
• /
• 2004

There are various researches on mobile robot systems. Connection method between server and client of mobile robot system is one of them. In the case of mobile robot system, when connection method between server and client is wireless than wire, applications may be expanded. Also in remote monitoring environment using mobile robot system, we are interested in an effective transmission of the image information between server and client. In this paper, Bluetooth is used for connection method between server and client. One of the major applications of Bluetooth is the cable replacement for mobile and peripheral devices. Using Bluetooth, we propose the control method of mobile robot system. Bluetooth offers fast and reliable transmissions of both voice and data over the globally available 2.4GHz ISM (Industrial, Scientific and Medical) band. It has the advantage of small size, low power and low cost. It has the disadvantage of limited range and limited bandwidth. Also in order to transfer effectively image information between remote site(server) and mobile robot system(client) using Bluetooth, we applied to MPEG-2 and MPEG-4 image compression techniques and the results are compared with each other.

• Analytical Science and Technology
• /
• v.32 no.6
• /
• pp.225-232
• /
• 2019

Traceability establishment in chemical measurements is a like a linkage established through an unbroken chain from the measured results to the international system (SI) of units. The primary process for traceability establishment is the purity assignment of a target material to be measured. In this study, we studied the purity assignment of 17α-hydroxyprogesterone (17-OHP). The presence of 17-OHP is indicative of congenital adrenal hyperplasia (CAH) and it builds up due to the deficiency of 21-hydroxylase and 11β-hydroxylase enzyme in the human blood. The purity assignment of 17-OHP was performed by the mass balance method, in which the impurities are categorized into four classes: total related structural impurities, water, residual organic solvents, and nonvolatiles/inorganics. The total related structural impurities were characterized by HPLC-UV; water content was determined by Karl-Fisher coulometer; and the total residual solvents and nonvolatiles/inorganics were determined by TGA. The purity of 17-OHP from a commercial manufacturer was calculated as 993.30 mg/g, and the expanded uncertainty was 0.58 mg/g. The proposed method was validated by uncertainty evaluation and comparing with the actual value of purity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1147-1154
• /
• 2004

This paper is the third of several companion papers which compare the method of Air-Fuel ratio determination. In the previous works, Eltinge chart was expanded to arbitrary fuel composition as a reference exhaust composition. The compensation of unburned hydrocarbon in Eltinge chart and comparison of Spindt and Eltinge method were also discussed. In addition to Eltinge and Spindt's one, however, there are many methods which calculate Air-Fuel ratio from exhaust emission. Among these methods, carbon balance and oxygen balance are widely used in practice. In some applications, linear formula from statistical method is being used in the field due to its simplicity and convenience. In this paper, these various methods are evaluated and compared with Eltinge results and new linear formula is proposed for the gasoline fuel. The results show that the corrected carbon balance equation has excellent agreement with Eltinge and Spindt's one. On the other hands, the oxygen-balanced formula has a limitation according to the mixture state and AFR. For gasoline fuel, newly proposed linear equation has good compatibility with Eltinge and Spindt up to AFR 17.

• Korea Journal of Hospital Management
• /
• v.14 no.4
• /
• pp.52-70
• /
• 2009

This study is to analyse the reimbursement prices of drugs in Japan. Japan has the world's second-largest pharmaceutical market, and the world's largest price-controlled pharmaceutical market. The reimbursement prices of new drugs in Japan are determined by confidential negotiations between the manufacturer and the Japanese Ministry of Health, Labor, and Welfare. Pharmaceuticals account for a larger share of total healthcare expenditures in Japan than in most other major pharmaceutical markets such as France, Germany, United Kingdom and United States. Prescription drugs' share of total healthcare spending has slightly increased in recent years, from 20.2% in 2000 to 21.5% in 2004, the most recent year for which data are currently available. This trend is attributable to the effect of the Japanese rapidly aging population that stimulates demand for healthcare services. There are several method of price setting for drugs as below. First, on the initial pricing of branded drugs, is the similar-efficacy pricing method and cost calculation method. Second is postmarketing price changes which are biennial price revisions under the rule of National Health Insurance. Third is the rule of the generics price. Recently, the generics market is expanded because there are increasing numbers of hospitals by DPCs(Diagnosis-procedure Combinations).

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1623-1629
• /
• 2004

The objective of this study is the rapid bulk combustion of mixture in a constant volume chamber with a tiny sub-chamber. Some narrow passage holes were arranged to induce simultaneous multi-point ignition in the main chamber by jet of burned and unburned gases including radicals from the sub-chamber, and the equivalence ratios of pre-mixture in the main chamber and the sub-chamber were the same. The principal factors of the Radical Induced Auto-Ignition (RIAI) method are the diameter of the passage holes and the volume of sub-chamber. The relationship between the sub-chamber and diameter of passage hole was represented by the ratios of sub-chamber volume to passage hole volume. The ratios are non-dimensional coefficients for sub-chamber characteristics. As a result, the RIAI method reduced the combustion period, which expanded the lean limit in comparison with SI method.