• E2M - 전기 전자와 첨단 소재
• /
• 제10권3호
• /
• pp.217-225
• /
• 1997

In this study, the PVDF organic thin film was fabricated by the physical vapor deposition method to be dry-process. The distance of heat source and substrate was 5[cm] and the temperature of substrate was 30[.deg. C], when the pressure had reached 2.0 x 10$^{-5}$ [Torr], the temperature of heat source was reached to 285[.deg. C] to heat at 6-8[.deg. C/min] rate, the shutter was opened and deposition was started. TG-DTA(Thermogravimetric-Differential Thermal Analysis) spectrum of PVDF pellets showed that endothermic peak arose at 170[.deg. C] and exothermic peak at 524[.deg. C], but that of thin PVDF film showed that endothermic peak arose at 145[.deg. C] and exothermic peak at 443[.deg C]. The current density was increased linearly with increasing voltage but increased nonlinearly with higher electric field than 250[kV/cm] and activation energy was about 0.667[eV] at the temperature of 30-90[.deg. C].

• Journal of Photoscience
• /
• 제8권3_4호
• /
• pp.113-117
• /
• 2001

Several styrylquinolium salts were synthesized to investigate their absorption and thermal properties, which had five different p-aminobenzene units and three different counter ions (iodide, perchlorate, and hexafluorophosphorate anion), respectively. Hydroxy, methoxy, and methyl group in the meta position to the amino group led to bathochromic shift, while Ν-ethyl-Ν-chloroethylamino unit instead of Ν,Ν-diethylamino unit resulted in hypsochromic shift. A dye having a methoxy group in the meta position to the amino group had the highest molar extinction coefficient ($\xi$), while a dye carrying chloro group in Ν-alkyl chains had the lowest $\xi$. The type of counter ions had no effect on spectral properties like the maximum absorption wavelength and $\xi$. All styryl dyes had exothermic peaks at decomposition in DSC curves. Among these styryl dyes, S2 series with perchlorate anions showed the strongest exothermic decomposition. From TGA spectra, S3 series with hexafluorophosphorate anions had the best thermal stability and the sharpest threshold at thermal decomposition.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.9-21
• /
• 2002

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the heat transfer rate in cylindrical bed reactor packed with calcined Dolomite. Two dimensional (radial and circumferential) Partial differential equations, concerning heat and mass transfer in packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction of calcined Dolomite and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion of reactant in the packed bed reactor and the amount of exothermic heat released from the reactor are follows. It was found that all of calcined Dolomite packed bed kept the reaction temperature of about 750K throughout the entire part of the bed, immediately after the steam was introduced exothermic reaction of hydration was proceeded from the packed bed inpu to output and from wall side to center. The rate of thermochemical reaction depends on the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.

• 태양에너지
• /
• 제17권1호
• /
• pp.67-77
• /
• 1997

본 연구는 에너지 밀도와 승온효과가 큰 화학 열펌프시스템 개발을 위해 무기 수화물계인$Ca(OH)_2/CaO$ 원주형 충전층내 핀을 주입 전열 촉진한 경우에 있어서 반응촉진 효과의 이론적 평가를 행하였다. 그 결과 충전층내 수화 탈수 반응시 반응층내 시간에 따른 온도 분포변화 및 반응율 분포에 대한 수치 해석 결과 전열핀 주입에 따른 반응완결 시간이 절반이하로 줄일 수 있다고 한 실험결과와 잘 일치됨을 알 수 있었다. 또한 해석결과 열화학 반응은 주로 온도 및 농도에 의존하였고 경계조건과 입자 충전층의 열전도에 의해 크게 좌우됨을 알 수 있었다.

• International Journal of Safety
• /
• 제9권1호
• /
• pp.6-11
• /
• 2010

Thermal analysis, heating test on gram scale and simulation of exothermic behavior based on kinetic analysis has been conducted in order to evaluate thermal hazards of self-polymerization of MDI. The exothermic reactions of MDI are expected to be the polymerization which forms carbodiimide and carbon dioxide, dimerization and trimerization. When MDI is kept in adiabatic condition during 1 week (10080 hours), the simulated result shows runaway reaction can occur in the case that initial temperature was more than $130^{\circ}C$. The relationship between the initial temperature (T, $^{\circ}C$) and TMR is given in a following equation. TMR=$4.493{\times}10^{-7}$ exp ($9.532{\times}10^3$/(T+273.15)) We propose that the relationship gives important criteria of handling temperature of MDl to prevent a runaway reaction.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2003년도 춘계학술논문발표회논문집
• /
• pp.164-170
• /
• 2003

In this paper, we studied on the firing characteristics and electrical fire analysis of power cord deteriorated by thermal stress. The cross section of PVC insulating cord deteriorated by indirect flame decreased through heat convection. PVC insulating cord deteriorated by direct flame was bumpy shape. The exothermic peak of normal cord was shown at ($526.7^{\circ}C$), but the peaks or on(heat treatment temperature) ($150^{\circ}C$) cord was shown at ($299.6^{\circ}C$) and [$502.2^{\circ}C$]. The exothermic peaks according to high temperature were similar to those of amorphous carbon. In the FT-IR analysis, the absorption peak of normal cord indicated double bond of oxygen and carbon in benzene ring at 1720.0$cm^{1}$. As the HTT was high, the height of characteristic peak decreased and the peak of carbonyl group was shown at about 1625.7$cm^{-1}$. The characteristic peak of single bond(O-H) was shown at about 3479.2$cm^{-1}$. In case of the internal part of wire covering deteriorated by over current, the characteristic peak were shown at about 3417.3$cm^{-1}$ and 1600.2$cm^{-1}$. The above results show that we can distinguish the differences according to the fire pattern through the internalㆍexternal analysis of wire covering deteriorated by heat.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권7호
• /
• pp.349-353
• /
• 2006

[ $TiO_2-Nb_2O_5$ ] sol was prepared using sol-gel method. Crystalline properties of gel powder changed from rutile phase to anatase phase with increasing $Nb_2O_5$ additives at $800^{\circ}C$, while they retained rutile phase regardless of $Nb_2O_5$ additives at $900^{\circ}C,\;1,000^{\circ}C$. They retained amorphous phase from $50^{\circ}C\;to\;400^{\circ}C$, retained anatase phase from $500^{\circ}C\;to\;600^{\circ}C$ and had rutile phase over $700^{\circ}C$ at 1mole% $Nb_2O_5$ additive. After $TiO_2-Nb_2O_5$ sol retained low viscosity with normal chain structure for a long time, its viscosity increased fast with network structure. DTA properties of gel powder had endothermic reaction due to evaporation of propanol and water about $78^{\circ}C$, had exothermic reaction due to propanol combustion about $290^{\circ}C$ and had exothermic reaction due to changing of $TiO_2$ phase about $640^{\circ}C$.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.151-157
• /
• 1995

Frequency-dependent electrical properties of $C_{22}$-Quinolinium(TCNQ) LB films were investigated in a frequency range of 10[Hz]-13[MHz] along a perpendicular direction. The films were heat-treated to understand an electrodynamic response in a temperature range of 20-240[.deg. C]. Frequencydependent dielectric constants show that there are two characteristic dispersions; one is a dispersion occuring near 1[MHz] coming from the orientational polarization of the molecules and the other one is an interfacial polarization effect below 1[kHz] or so when the annealing temperature is above 80 [.deg. C]. The overall frequency-dependent dielectric constant is higher near 80[.deg. C]. It may be due to a softness of the alkyl chains. Several other methods were employed to identify the internal structure change of the films. DSC(differential scanning calorimetry) data of the $C_{22}$-Quinolinium(TCNQ) molecules shows that there is an endothermic process near 110[.deg. C] and a weak exothermic process near 180[.deg. C]. While the endothermic process is related to a disordering of the alkyl chains, the exothermic process seems to be due to a chemical structure change of the TCNQ molecules. Thickness measurement by ellipsometry shows that there is a thickness drop near 100[.deg. C], and the thickness above 120[.deg. C] becomes around 20[%] of the room-temperature value.lue.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.68-71
• /
• 2002

The electromagnetic properties and thermal behavior of ferrite cores used in the blocking filter for PLC were investigated as a function of additives. The highest density of 4.98 $g/cm^2$ and permeability of 8221 were obtained to the specimen added $MoO_3$ 400 ppm, $SiO_2$ 100 ppm and CaO 200 ppm since the microstructures were compacted through reduction of pores in the specimen. The permeability was increased up to 13094 at $110^{\circ}C$ with increasing temperature of specimen, however, it was decreased precipitously to under 100 over $110^{\circ}C$. The exothermic behavior was observed that the temperature of specimens became $102^{\circ}C$ at 1MHz. In the consequence, the ferrite core developed by this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to $93^{\circ}C$ in the range of 10kHz to 450kHz bandwidth qualified for PLC.

• 한국잠사곤충학회지
• /
• 제24권2호
• /
• pp.81-84
• /
• 1983

견사에 대한 산성염료인 Orange II의 평형수착을 pH 2.2 HCl염욕중에서 온도 50$^{\circ}$, 70$^{\circ}$ 및 9$0^{\circ}C$로 변화시켜, 또한 온도 $50^{\circ}C$에서 pH를 1.5, 2.2 및 4.0으로 조절하여 수착식을 검토하였다. pH 1.5 및 2.2에서의 수착식은 이원 model 즉 Langmuir형과 Nernst형의 합으로 표시됨을 알았다. Langmuir 수착평행상수 $K_{L}$ 은 온도의 상승과 pH의 증가에 따라 감소하였고, Nernst분배계수 $K_{P}$ 도 비슷한 경향을 보였다. 수착 반응은 발열반응임을 알 수 있었고 표준 entropy는 정의 값임을 알았다.