• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.38-44
• /
• 2010

Performance test of the 75ton class turbopump turbine was performed. Through the turbine power measurement in the wide-range operational conditions, velocity ratio, total pressure loss, and relative flow angle characteristics was quantified. Efficiency and nozzle exit pressure behavior was also investigated and compared with 30ton turbopump turbine data. A rotor blade was redesigned based on the test results and CFD analysis.

• Korean Institute of Interior Design Journal
• /
• no.37
• /
• pp.119-128
• /
• 2003

The goal of this study was to understand human behavior in reference to wayfinding during emergency situations. In an emergency situation, it is recommended that evacuees follow instructions about an available exit rather than finding their way on their own. Wayfinding studies suggest that landmarks affect entire route communication. Landmark analysis for this study Identified describability, e.g., name and simplicity of landmark features. A virtual reality (VR) simulation test was conducted to examine the effect of landmarks on wayfinding. The independent variables were landmarks, smoke. Results suggest that the describability of landmarks is a positive Influence to route communication. Findings from this study, however, Indicates that smoke condition did not significantly affect participants' wayfinding.

• Journal of Ship and Ocean Technology
• /
• v.5 no.1
• /
• pp.30-37
• /
• 2001

Ship optimal design is a multi-objective decision-making process and its optimal solution does not exit in general. It is a problem in which the decision-maker is very interested that an effective solution is how to be found which has good characteristic and is substituted for optimal solution in a sense. In the previous methods of multi-objective decision-making, the weighting coefficients are decided from the point of view of individuals which have a bit sub-jective an unilateral behavior. in order to fairly and objectively decide the weighting coeffi-cients, which are considered to be optimal in all system of multi-objective decision-making and satisfactory solution to the decision-maker, the pater presents a method of applying the Technology of the Biggest Entropy. It is proved that the method described in the paper is very feasible and effective be means of a practical example of ship optimal design.

• The Journal of Society for e-Business Studies
• /
• v.22 no.4
• /
• pp.141-158
• /
• 2017

Along with IT development, customers are getting more easily to express their opinions using various IT channels. In this situation, complaint management is a pressing issue for companies to acquire and maintain loyal customers with low cost. Most of previous studies have investigated customer complaint information by quantitative variables such as demographic information, transaction information, or complaint frequency, but studies focusing on qualitative aspects of complaint information are limited. Therefore, this paper considers the possibility for customers to leave even when they complain occasionally or briefly. This paper analyzes the quantitive aspects as well as the qualitative aspects using sentiment analysis with Exit-voice theory. The dataset contains 268,364 inquiries of 46,235 customers obtained from a contact center of a private security company in Korea. This paper carries out logistic regression and the results imply that the customers's explicit response and their implicit sentiment have different effect on customers leave. This study is expected to provide useful suggestions for the effective complaint management.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.396-402
• /
• 2010

The tracking of current location of residents is an essential requirement for context-aware service of smart houses. This paper presents a wireless sensor network system which could detect location transition such as entrance and exit to a room and also identify the user who passed the room, without duty of wearing any sort of tag. We designed new sensor node to solve the problem of short operation lifetime of previous work[1] which has two pyroelectric infrared (PIR) sensors and an ultrasonic sensor, as well as a 2.4 GHz radio frequency wireless transceiver. The proposed user identification method is to discriminate a person based on his/her height by using an ultrasonic sensor. The detection idea of entering/exiting behavior is based on order of triggering of two PIR sensors. The topology of the developed wireless sensor network system is simple star structure in which each sensor node is connected to one sink node directly. We evaluated the proposed sensing system with a set of experiments for three subjects in a model house. The experimental result shows that the averaged recognition rate of user identification is 81.3% for three persons. and perfect entering/exiting behavior detection performance.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.331-336
• /
• 2006

Moving behavior of groups of Hanwoo was observed when solid side was applied along the straight single file chute. Dark blue liners (PVC coated fabric) were hung on the outer side along the steel bars of chute to block vision of cattle. Ten animals were grouped together in a batch to move through chute to the restrainter. Movement of animals through chutes were significantly faster when solid side with liners were applied than when they had open vision of flight zone. And the difference in movement time between of solid side and open side was even greater in a longer chute than in a shorter one. From the experiment with longer chute, we could not find any significant differences between presence or absence of solid sides in the time spent for the leaading cattle to enter the squeeze chute from crowd pen. But the average time spent for movement from squeeze gait to restrainter was 22.78±1.15 seconds with solid sides, which was much shorter than with open sides (40.56±4.46 seconds). Time required for batch of animals to move from crowd pen to restrainter and exit was much faster with solid sides than with open sides: 96.33±3.98 seconds vs. 121.89±5.54 seconds from leading animal to enter the squeeze chute until the last animal of the batch to exit restrainter and 104.56±3.89 vs. 131.22±6.42 seconds for the whole batch of animals to enter the squeeze chute and exit restrainter. Another experiment with shorter chute showed that animals balked to right angled edge of the crowed pen before entering squeeze chute. We could not find any differences in time requred for the leading animal to enter the crowd pen from holding pen. Total time spent from entrance of leading animal to crowd pen until the last animal to exit restrainter was shorter with solid sides than with open sides: 177.44±5.20 seconds vs. 193.44±7.46 seconds.

• Journal of Korea Foundry Society
• /
• v.20 no.5
• /
• pp.290-299
• /
• 2000

A three-dimensional model was developed in order to simulate heat and fluid flow of a continuous casting billet. The model was coded with the general-purpose CFD program FIDAP, using the finite element method. The present model consists of 2 individual calculation schemes, named model 1 and model 2. Mold region only was calculated to check the pouring stream through submerged nozzle with model 1. Entire region, which consists of mold, secondary cooling, radiation cooling was calculated to predict crater end position, temperature profile and solid shell profile(model 2). Standard $k-{\bullet}\hat{A}$ turbulence model has been applied to simulate the turbulent flow induced by submerged nozzle. Enthalpy method was adopted for the latent heat of solidification. Fluid flow in mushy zone was treated using variable viscosity approach. The more casting speed and superheat increased, the more metallurgical length increased. The shell thickness at the mold exit is proved to be mainly controlled by superheat by the present simulation. It may be concluded that the present model can be successfully applied far the prediction of heat and fluid flow behavior in the continuous casting process.

• Journal of computational fluids engineering
• /
• v.20 no.2
• /
• pp.16-22
• /
• 2015

The pressure is generally lower than that of the freestream at the base of a missile body due to the energy loss by the flow separation around the edge of the base. The base pressure changes in the presence of the thrust jet due to the interaction between the base flow of the missile and the jet flow. In this study, behavior of the missile base pressure by the change of the jet exit pressure and the freestream condition is investigated using the CFD(Computational Fluid Dynamics) method. Effects of the grid type and the freestream condition are tested. The results are compared with the semi-empirical predictions and the flight test data. The CFD results agree well with the flight test data. The semi-empirical predictions overestimate the base pressure when jet thrust is strong for low freestream speed.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.314-319
• /
• 2011

In this study, the flow behavior of Newtonian and non-Newtonian coating liquids inside slot die has been scrutinized for the purpose of optimal internal die design in slot coating system from three-dimensional computations by CFD Fluent solver. A hybrid slot die could be optimally designed by changing the chamber or manifold structure to guarantee the uniform velocity distribution of coating liquids at die exit. Especially, for the non-Newtonian coating liquids, the length of coat-hanger for the uniform coating has been properly chosen, according to the degree of their shearthinning properties.

• Smart Structures and Systems
• /
• v.19 no.2
• /
• pp.213-224
• /
• 2017

The electromagnetic field can cause an essential change of the dynamic behavior of the railgun. The evaluation of the dynamics performance of railgun is a mandatory task. Here, a nonlinear electromagnetic force equation of the railgun is given in which the clearance, the thickness and the width of the rail are considered. Based on it, the nonlinear electromechanical coupled dynamics equations of Euler beam rails for the railgun are proposed. Using the equations, the nonlinear free vibration frequency of the railgun is investigated and the effects of the system parameters on the frequency are analyzed. The nonlinear forced responses of the rail to the electromagnetic excitation are investigated as well. The results show that as the nonlinearity of the railgun system is considered, the vibration frequencies of the railgun system increase; as the current in the rail increases, the difference between the natural frequencies and the nonlinear vibration frequencies increases significantly; the nonlinearity of the railgun system is more obvious for smaller distance between the two rails, smaller rail thickness, and smaller stiffness of the elastic foundation; the unstable dynamics state of the rail system occurs when the armature runs to the exit of the railgun. The results are useful for design and application of the railgun system.