• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.100-108
• /
• 1993

In this paper, noticing the point of human's ability which appropriately cope with vague conditions, we design fuzzy traffic signal light controller similar to human's distinction ability and decide the optimum cycle most suited to any traffic junction using fuzzy identification algorithm. In this study, for the control output decision process we design fuzzy controller better than electronic vehicle actuated controller in performance. We propose the cycle decision method which is not limited by the variance of traffic junction vehicle number through overcoming the limit of Webster's method which is adopted by the fixed cycle controller. Simulated experimental results show that fuzzy controller and fuzzy identification algorithm are better than the existing electronic vehicle actuated controller and fixed cycle controller in delay time per vehicle.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.468-477
• /
• 1994

Existing fuzzy control methods do not perform well when applied to systems containing nonlinearities arising from unkonwn deadzones. In particular, we show that a conventional fuzzy logic controller applied to a system with a deadzone suffers from poor transient performance and a large steady-syate error. In this paper, we propose a novel two-layered fuzzy logic controller for controlling systems with deadzones. The two-layered control structure consists of a fuzzy logic-based precompensator followed by a conventional fuzzy logic controller. Our proposed controller exhibits superior transient and steady-state performance compared to conventional fuzzy controllers. In addition, the controller is robust to variations in deadzone nonlinearities. We illustrate the effectiveness of our scheme using computer simulation examples.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.12
• /
• pp.629-637
• /
• 2005

This paper proposes a new anti-windup strategy to suppress integrator windup for PI speed controller and to be implemented on the existing system with minimal modification. When the speed control mode is changed from P controller to PI controller. an appropriate initial value for integrator is assigned. This value restricts overshoot and high settling time. Also, the proposed method guarantees the designed performance independent on operating conditions, i.e. different set-point change and load torque. Simulation and experimental results for PMSM speed controller have shown its superior performance compared with the conditional integration and tracking back calculation.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1341-1343
• /
• 1996

This paper presents a design method for an on-line adaptive neural networks based intelligent controller. The proposed neural controller, assuming PID controller is initially presented, learns the equivalent behaviors of the existing PID controller initially and switches to take over the PID control system. Then, it executes on-line adaptation via evaluating its performance and minimizing user defined cost function constantly so that the optimal control can be achieved. The PID controller and the proposed neural controller are investigated and compared in computer simulation.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.881-888
• /
• 2009

This research introduces the architecture of managing products based software. There are many of the architectures for managing products using software instead of manpower. In case of MVC and existing architectures, The architectures transfer redundant data so the architectures cause a problem that unnecessary data moved. This research presents VMDC(View, Model, Dispatcher, Controller) architecture to solve the problem. Dispatcher of VMDC grasps necessary data and reconstructs objects to efficient transferring data. This research shows usecase that designed VMDC(View, Model, Dispatcher, Controller) and demonstrate efficiency of VMDC(View, Model, Dispatcher, Controller) together. after demonstration this research present with next research.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.62-65
• /
• 2004

An optimal robust controller design method for gun driving system is discussed in this paper. The parameters of the gun driving controller are tuned by using the LQR characteristics for the performance and robustness. Tuning method that optimize velocity error gives a significant improvement over the existing PID tuning methods. It is shown that the tuning result of real gun driving system which is regarded as rigidness model or stiffness model satisfy performance and robustness.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.177-182
• /
• 1989

In this paper a new adaptive control algorithm is derived, with the unknown manipulator and payload parameters being estimated online. In practice, we may simplify the algorithm by not explicity estimating all unknown parameters. Further, the controller must be robust to residual time-varying disturbance, such as striction or torque ripple. Also, the reference model is a simple douple integrator and the acceleration input for robot manipulator consists of a proportion and derivative controller for trajectory tracking purposes. The validity of this control is confirmed in simulation where two-link robot manipulator shows the robust performances in spite of the existing nonlinear interaction and unknown parametrictings

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.50-55
• /
• 1998

Mould level control system for continuous casting process involves stick-slip friction in the sliding gate , time-delay, non-linearity, and certain uncertainties such as friction force variations between molten steel and the inner wall of mould. In this paper, sliding mode control technique was used to solve these complex control problem. The controller is then designed and implemented onto the continuous casting process. Testing result shows that sliding mode controller can decrease the fluctuating magnitude of the mould level and is superior to the existing PID controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.669-674
• /
• 1990

A nonlinear feedback linearizing control method for a EMS(Electro Magnetic Suspension) system is proposed. After linearizing the system using the exact linearizing method, conventional linear system control theory has been applied. Computer simulations are carried out in order to compare the performance of the proposed controller with that of the existing controller designed by using Taylor series expansion around nominal points.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.3
• /
• pp.142-147
• /
• 2004

In this study, We developed the microprocessor based controller for Auto Section Switch(ASS). This is installed at consumer's medium-high voltage(load capacity is below 4,000 kVA) switchgear. This function is cooperate with protection device of fault section and automatically dividing the section. And It is designed by Air putter type extinction structure and adopt the mechanism and breaking part module of existing Load Breaker Switch. In addition, We successfully conducted the operation test and checked main function of proto-type.