• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.418-429
• /
• 2018

This paper studies the decentralized position/force control problem for constrained reconfigurable manipulator without torque sensing. A novel joint torque estimation scheme that exploits the existing structural elasticity of the manipulator joint with harmonic drive model is applied for each joint module. Based on the estimated joint torque and dynamic output feedback technique, a decentralized position/force control strategy is presented. In order to solve the problem of controller parameter perturbation, the non-fragile robust technique is introduced into the dynamic output feedback controller. Subsequently, the stability of the closed-loop system is proved using the Lyapunov theory and linear matrix inequality (LMI) technique. Finally, two 2-DOF constrained reconfigurable manipulators with different configurations are applied to verify the effectiveness of the proposed control scheme in numerical simulation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.61-66
• /
• 2002

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used for the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and the second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined parallel fuzzy controller. The effectiveness of proposed scheme is demonstrated through computer simulation.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2453-2455
• /
• 2005

We represent an efficient intelligent digital redesign method for a Takagi-Sugeno (T-S) fuzzy system Intelligent digital redesign means that an existing analog fuzzy-model-based controller converts to equivalent digital counter part in the sense of state-matching. The proposed method performs previous work, moreover, it allows re matching the states of the overall closed-loop T-S fuzzy system with the predesigned analog fuzzy-model-based controller. And the problem of stability represent convex optimization problem and cast into linear matrix inequality (LMI) framework. This method applies to the helicopter systems which are the nonlinear plant and determine the feasibility and effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.652-654
• /
• 1996

A study of the coordinated control of a TCSC and an existing PSS is presented when both are used to damp the low frequency oscillations. TCSC is modeled by the first order delay model. Linear quadratic Gaussian controller is used for designing PSS and TCSC supplementary controller. The performance of the proposed controllers is simulated in a one machine infinite bus model. As a result, it is shown that to damp the low frequency oscillations efficiently, it is necessary to control TCSC and PSS simultaneously.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1116-1118
• /
• 1996

This paper designs a digital controller by making use of the $H^{\infty}$ control algorithm and $\mu$-synthesis in order to keep a balance of the VTOL(Vertical Take Off and Landing Plane) vehicle with 4 fans. A identification of the actual model is acquired by the vehicle rolling, pitching and yawing angles for a pseude-random signal input and various identification theories. In spite of parameter variations and existing disturbances, the designed controller showes its robust performance through simulations and experiments.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2337-2339
• /
• 2003

Digital technologies are required to reduce to events due to human fails clarified existing nuclear power plant. When we are trying to retrofit control rod control system from analog system to digital one, new communication network and controller is required to be constructed. In this paper, we are going to introduce experience in developing economic and reliable control rod control system construction. this proposed system consists of redundant POS, communication network, and controller to provide enhance reliability and safety.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.192-197
• /
• 2013

Road traffic noise barriers being used to reduce the noise, but the city surroundings inhibition, ecosystem disturbance, and it is difficult to maintain. Can enhance or complement the existing noise barrier performance, so that it is necessary to develop an electronic noise-reduction system In this paper, we proposed an electronic road noise reduction devices to reduce road noise for a DSP-based signal processing and analog signal input-output controller. In order to verify the control performance, we performed noise reduction experimentation of ANC by filtered-X LMS algorithm and traffic noise signal injection. The controller is equipped with noise reduction algorithms were tested on the characteristics of directional and omnidirectional speaker.

• International Journal of Safety
• /
• v.10 no.1
• /
• pp.22-31
• /
• 2011

Seismic response control method of the bridge structures with semi-active control device, i.e., magneto-rheological (MR) damper, is studied in this paper. Design of various kinds of clipped optimal controller and fuzzy controller are suggested as a semi-active control algorithm. For determining the control force of MR damper, clipped optimal control method adopts bi-state approach, but the fuzzy control method continuously quantifies input currents through fuzzy inference mechanism to finely modulate the damper force. To investigate the performances of the suggested control techniques, numerical simulations of a multi-span continuous bridge system subjected to various earthquakes are performed, and their performances are compared with each other. From the comparison of results, it is shown that the fuzzy control system can provide well-balanced control force between girder and pier in the view point of structural safety and stability and be quite effective in reducing both girder and pier displacements over the existing control method.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1722-1723
• /
• 2007

This paper describes a simple method to reduce rotation angle error of mobile robot using omni-wheel[3](omni-bot). This method can be applied to not only omni-bot, but also other robot with a large number of servo motor. Robot using many servo motor as omni-bot is complicated for hardware and software, each servo motor has difficulty in synchronizing. Three servo motor, three omni-wheel and three serial servo motor controller is used, PC or Micro Processor interface with the serial servo controller through "SSC100" protocol. In order to check the improvement of the proposed serial servo synchronization compared to existing sequential communication method. comparing object is rotation angle error of omni-bot. The results of this make building of omni-bot system easy and decrease rotation angle error.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1811-1813
• /
• 2005

We represent an efficient intelligent digital redesign method for a Takagi-Sugeno(T-S) fuzzy system. Intelligent digital redesign means that an existing analog fuzzy-model-based controller converts to equivalent digital counter part in the sense of state-matching. The proposed method performs previous work, moreover, it allows to matching the states of the overall closed-loop T-S fuzzy system with the predesigned analog fuzzy-model-based controller. And the problem of stability represent convex optimization problem and cast into linear matrix inequality(LMI) framework. This method applies to the helicopter systems which are the nonlinear plant and determine the feasibility and effectiveness of the proposed method.