• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.91-98
• /
• 2011

In this paper, a multi-channel speech enhancement method using the linearly constrained minimum variance (LCMV) algorithm and a variable learning rate control is proposed. To control the learning rate for adaptive filters of the LCMV algorithm, the direction of arrival (DOA) is measured for each short-time input signal and the likelihood function of the target speech presence is estimated to control the filter learning rate. Using the likelihood measure, the learning rate is increased during the pure noise interval and decreased during the target speech interval. To optimize the parameter of the mapping function between the likelihood value and the corresponding learning rate, an exhaustive search is performed using the Bark's scale distortion (BSD) as the performance index. Experimental results show that the proposed algorithm outperforms the conventional LCMV with fixed learning rate in the BSD by around 1.5 dB.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.1-6
• /
• 2009

An effective method is proposed to suppress the second-order beams(SOBs) that result from the cross-polarized fields of 2D edge slot arrays. By rearranging the conventional sequence of stacking waveguides, the SOBs are shown to be considerably reduced and the 9 dB suppression is obtained. The optimal sequence is obtained from the genetic and exhaustive searches and its effects are verified using near-field measurements as well as theoretical estimation. Since the proposed method requires no additional polarizing structures such as baffles, it is very easy and cost-effective to implement.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.476-479
• /
• 2001

Interconnection of new energy sources, such as photovoltaic generation, wind power generation, etc., into the electric power distribution system may result in the increasing short-circuit capacity when a short circuit fault occurs. The short-circuit capacity becomes over the interrupting ratings of circuit breakers, and then they fails to operate in the proper way they prevent fault currents from flowing into the distribution facilities and thus causing them serious damages. This study deals with impacts on the respective short-circuit capacity of both low voltage and extra high voltage distribution systems at which new energy sources are installed. In order to obtain more accurate and all-case values very close to reality in the complicated distribution system, computer simulation tools should be required. In this paper, however, its focus is placed on examining the varying trend of short-circuit capacity, which may happen owing to new energy source interconnection, as a previewing step for exhaustive simulation studies.

• Asia-Pacific Journal of Business
• /
• v.5 no.1
• /
• pp.23-31
• /
• 2014

Entrepreneurship is considered as an important driver of economic growth, new firm creation, business rejuvenation& job creation. Over a period of time research within entrepreneurship literature has shifted from entrepreneur and his personality to his behavioral disposition. This has led to emergence of entrepreneurial orientation (EO) construct, which focuses on the process of entrepreneurship at firm level and it has emerged as the most widely researched area within entrepreneurship field. Though research in this field has been rigorous and exhaustive, still there have been concerns that researchers might have prematurely agreed on the composition, dimensionality, and nature of EO Construct. There has been considerable debate about whether EO Construct comprises three or five dimensions, about co-variance or independence of these dimensions and nature of construct whether formative or reflective. This article builds an argument about the multidimensional nature of EO construct comprising five dimensions, which vary independently and the fact that EO is better explained through formative construct rather than reflective one.

• Journal of the Korea Society for Simulation
• /
• v.8 no.2
• /
• pp.73-85
• /
• 1999

In this paper, the productivity estimation of the painting line in an automobile plant is studied. To improve the bottleneck and the weak point of the process, computer simulations are performed. In determining the system specification, the status of the conveyor lines and the other physical facilities are considered in order not to intervene with each other and to satisfy the painting facility restrictions. As simulation parameters, production performance ratio, number of hanger and dolley, down time, speed of conveyor and the pitch of a painting body are chosen on the basis of exhaustive field evaluation to study their effects on the capacity of the process. The results of the simulation show that we can improve the capability of they system without additional investment to the plant facility. The best condition for the maximum capacity of the process is selected by comparing the alternative computer simulation results. As a simulation language, Promodel is used which is very useful and easy to use in manufacturing oriented simulation.

• International Journal of High-Rise Buildings
• /
• v.6 no.1
• /
• pp.91-99
• /
• 2017

Special consideration should be given to differential column shortening during the design and construction of a tall building to mitigate the adverse effects caused by such shortening. The effects of the outrigger - which is conventionally used to increase the lateral stiffness of a tall building - on the differential shortening are investigated in this study. Three analysis models, a constant-section, constant-stress, and general model, are prepared, and the differential shortenings of these models with and without the outrigger are compared. The effects of connection time, sectional area, and location of the outrigger on the differential shortening are studied. The sectional area of the outrigger shows a non-linear relation in reducing the maximum differential shortening. The optimum locations of the single and dual outriggers are investigated by an exhaustive search method, and it is confirmed that a global optimum location exists. This study shows that the outrigger can be utilized to reduce the differential shortening between the interior core wall and the perimeter columns as well as to reduce the lateral displacements due to wind or earthquake loads.

• Journal of Ginseng Research
• /
• v.37 no.2
• /
• pp.144-166
• /
• 2013

Actoprotectors are preparations that increase the mental performance and enhance body stability against physical loads without increasing oxygen consumption. Actoprotectors are regarded as a subclass of adaptogens that hold a significant capacity to increase physical performance. The focus of this article is studying adaptogen herbs of genus Panax (P. ginseng in particular) and their capabilities as actoprotectors. Some animal experiments and human studies about actoprotective properties of genus Panax attest that P. ginseng (administered as an extract) significantly increased the physical and intellectual work capacities, and the data provided suggests that ginseng is a natural source of actoprotectors. Preparations of ginseng can be regarded as potential actoprotectors which give way to further research of its influence on physical and mental work capacity, endurance and restoration after exhaustive physical loads while compared with reference actoprotectors.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.434-442
• /
• 2011

This paper presents a practical differential fault analysis method for the faulty Advanced Encryption Standard (AES) with a reduced round by means of a semi-invasive fault injection. To verify our proposal, we implement the AES software on the ATmega128 microcontroller as recommended in the standard document FIPS 197. We reduce the number of rounds using a laser beam injection in the experiment. To deduce the initial round key, we perform an exhaustive search for possible key bytes associated with faulty ciphertexts. Based on the simulation result, our proposal extracts the AES 128-bit secret key in less than 10 hours with 10 pairs of plaintext and faulty ciphertext.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.81-82
• /
• 2006

Most work on cooperative diversity has assumed that the cooperating group (source and partners) and the associated average channel conditions between terminals (source, partners, and destination) are predetermined. In practical situations, however, it is important to develop the efficient algorithms for assigning the terminals with good inter-user channels for cooperating groups. In this paper, we propose the partner assignment algorithm for cooperative diversity in mobile communication systems. The proposed partner assignment algorithm is investigated by using the path loss model for mobile communication systems. Numerical results show that the proposed partner assignment algorithm provides the comparable probability of cooperative transmission to the partner assignment algorithm using exhaustive search. The probability of cooperative transmission increases with the number of users, which gives potential benefits of practical implementation to user cooperation in mobile communication systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.419-420
• /
• 2006

In the new video coding standard H.264/AVC, motion estimation (ME) is allowed to search multiple reference frames for improve the rate-distortion performance. The complexity of multi-frame motion estimation increases linearly with the number of used reference frame. However, the distortion gain given by each reference frame varies with the video sequence, and it is not efficient to search through all the candidate frames. In this paper, we propose a fast mult-frame selection method using all zero coefficient block (AZCB) prediction and sum of difference (SAD) of neighbor block. Simulation results show that the speed of the proposed algorithm is up to two times faster than exhaustive search of multiple reference frames with similar quality and bit-rate.