• Analytical Science and Technology
• /
• v.34 no.2
• /
• pp.46-55
• /
• 2021

Evaluation of drug-excipient compatibility is one of the basic steps in the preformulation of pharmaceutical dosage forms. Some reactive excipients have been known so far which may cause stability problems for drug molecules in pharmaceutical dosage forms. The aim of this study was to evaluate drugexcipient compatibility of gliclazide with some common pharmaceutical excipients, known for their ability to incorporate in drug-excipient interactions. Binary mixtures were prepared using lactose, magnesium stearate, polyvinylpyrrolidone, sodium starch glycolate, polyethylene glycol 2000 and dicalcium phosphate. Based on the results; gliclazide was incompatible with all tested excipients; but not with dicalcium phosphate. DSC (Differential Scanning Calorimetry) results were in accordance with HPLC (High Pressure liquid chromatography) data and were more predictive than FTIR (Fourier Transform Infrared Spectroscopy). Drug and reactive excipients incompatibility was fully discussed and documented. It is advisable to avoid incompatible excipients or carefully monitor the drug stability when incorporating such excipients in final formulation designs.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.303.1-303.1
• /
• 2003

Excipients of the drug products can sometimes affect the rate and extent of drug absorption. The changes in components or composition of them can also affect the pharmacological activity. So the quantity of excipients to be changed, the new excipients and atypically large amount of commonly used excipients should be considered as bioequivalence studies. (omitted)

• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.239-243
• /
• 2006

Due to the development of new dosage forms and the improvement or pharmaceutics, the pharmaceutical excipients have become more specified and diverse, and the reclassification on them became necessary. Also with the increasing interests on the kinds and usage amount, related provisions, and evaluation of the pharmaceutical excipients, the systemic and effective control of them was in its demand. Therefore, in this research, we provided the following information on excipients: the type, amount and specification. In order to provide the information, we investigated, analysed and summarized the excipients that are approved by KFDA and published $\ulcorner$Handbook of Pharmaceutical Excipients$\lrcorner$). This handbook is expected to be used as a reference in the development of the pharmaceutics and evaluation in them. As the importance of excipients in pharmaceutics are increasing, IPEC which consist of IPEC-America, IPEC-Europe and JPEC, PDG and ICH have tried to make an international harmonization on excipient. This current status was not an exception to Korea, therefore, the result of this research is expected to make a progress in the evaluation on the excipients to an advanced level.

• Journal of Life Science
• /
• v.28 no.4
• /
• pp.472-477
• /
• 2018

Pravastatin sodium is a 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitor used in the treatment of hypercholesterolemia by reducing cholesterol biosynthesis. Pharmaceutical excipients of commonly used including water, diluents, stabilizers, disintegrants, lubricants and colorants, and were identified for compatibility. All tests were performed by means of physical mixture of pravastatin and the excipients, which were placed in a press-through-pack (PTP) and incubated under accelerated conditions ($40^{\circ}C$ and 75% relative humidity) for 3 months. The blends of pravastatin with all excipients developed white, off white, and light brown powders, which showed no changes upon visual analysis. Accelerated conditions changed the degradation profile of pravastatin calcium in the HPLC system when mixed with different excipients. Although most excipients can have minor effects on pravastatin stability, the major degradation product from pravastatin was lactone. Low-level interaction (assay and impurity) was induced by all excipients except for microcrystalline cellulose and croscarmellose sodium. These excipients increased lactone impurity in 3 months by as much as 0.22% and 0.18% respectively. The total mixture slightly increased the lactone impurity (by 0.43% in 3 months) of pravastatin. There was no change in the assays of all excipients. These results will be helpful in studying tablet size reductions for convenience of use.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.4
• /
• pp.231-254
• /
• 1993

These days, it is not uncommon that a same kind of drug is circulated globally. However, the qualities of excipients used in the same drug have to be sometimes different depending on the different requirements in the qualities stipulated by each country. For a supplier of pharmaceutical excipients, it is generally necessary to carry out different tests on the same kind of testing criteria depending on the country of destination. Thus, the discrepancies between compendium requirements of pharmaceutical excipients create severe problems in various area of industrial activities. The decision of the United States Pharmacopoeia, European Pharmacopoeia and Japanese Pharmacopoeia Commissions to harmonize the requirements is a unique chance for the industries to overcome these problems. On the other hand, discrepancies of general test methods and requirements in each monograph of pharmaceutical excipient between the compendia valid at present are in most cases extensive. Consequently their harmonization needs a lot of detailed work requiring strong support from the industry. Based on these circumstances, pharmaceutical excipients councils have been established first in U.S.A. and successively in Europe and in Japan to contribute to the harmorization process. We should like to review here the progress since the Orlando Conference in 1991 and comment about the matters at issue with regard to the international harmonization of pharmaceutical excipients.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.67-71
• /
• 2003

Drug excipients are material used in the formulation of pharmacologically active drugs. They have a variety of roles including dilutents/fillers/bulking agents, binders/adhesives, propellant, disintegrants, lubricants/dlidants, colors, flavors, coating agents, polising agents, fragrance, sweeteening agent, polymers and waxes. Excipient should be inert or inactive and does not interfere with the test. Nowadays within industry there has been a recent surge of interest in novel excipient for novel dosage forms. The purpose of the review is to introduce the administration systems of drug excipient about kinds, matters to be attended to change of excipients.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.4
• /
• pp.237-244
• /
• 2010

This study investigated basic material properties and compressibility of commonly used pharmaceutical excipients. Five classes of excipients are selected including starch, lactose, calcium phosphate, microcrystalline cellulose (MCC), and povidone. The compressibility was evaluated using compression parameters derived from Heckel and Kawakita equation. The Heckel plot for lactose and dicalcium phosphate showed almost linear relationship. However, for MCC and povidone, curves in the initial phase of compression were observed followed by linear regions. The initial curve was considered as particle rearrangement and fragmentation and then plastic deformation at the later stages of the compression cycle. The Kawakita equation showed MCC exhibited higher compressibility, followed by povidone, lactose, and calcium phosphate. MCC undergoes significant plastic deformation during compression bringing an extremely large surface area into close contact and facilitating hydrogen bond formation between the plastically deformed, adjacent cellulose particles. Lactose compacts are consolidated by both plastic deformation and fragmentation, but to a larger extent by fragmentation. Calcium phosphate has poor binding properties because of its brittle nature. When formulating tablets, selection of suitable pharmaceutical excipients is very important and they need to have good compression properties with decent powder flowability. Material properties tested in this study might give a good guide how to select excipients for tablet formulations and help the formulation scientists design the optimum ones.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.367-372
• /
• 2010

Rabeprazole sodium (RPN) is known to be very unstable at acidic condition or some acidic pharmaceutical excipients such as acrylic acid polymer (carbomer 934) with carboxylic acids. Thus, degradation mechanism of binary blends of rabeprazole with pharmaceutical excipients in a solid state without using solvents at three different ratios (3:1, 1:1 and 1:3) was investigated using Fourier transform infrad (FTIR) spectroscopy. Alkalizer (MgO), neutral hydroxypropymethylcellulose (HPMC 4000) were also tested for comparison. The binary blends were stored under accelerated conditions ($40^{\circ}C$/75% relative humidity) for two weeks. The concentration of thioether rabeprazole from the binary blends with acidic carbomer 934 increased as the rabeprazole concentration decreased. In addition, the degradation half-life of rabeprazole as well as the relative peak area ratios obtained from FTIR spectra of S=O stretching at $1094.1\;cm^{-1}$ decreased consistently as the fraction of carbomer 934 increased due to its sensitivity between the basic benzimidazole nitrogen and carboxylic acid group of carbomer 934. The physical appearance also turned into strong brown color in the presence of carbomer 934. In contrast, there were no significant changes in the degradation kinetics of rabeprazole with MgO and HPMC 4000 in a solid state. This present study demonstrated that the solid-state compatibility test with the aid of HPLC chromatographic and FTIR spectral analyses could offer a valuable methodology to select suitable pharmaceutical excipients and to elucidate the degradation mechanism of RPN for drug formulations at the early formulation stages.

• Journal of Pharmaceutical Investigation
• /
• v.12 no.3
• /
• pp.74-87
• /
• 1982

To evaluate the pharmaceutical aspects of solvent deposition method where drug is solvent deposited on the surface of excipients, a study has been made on dissolution characteristics of indomethacin solvent deposited on lactose and potato starch. In a solvent deposition system, the drug-to-excipient ratio and kind of excipient effect much on dissolution rates of indomethacin. The experimental results are as follows: 1) Lactose was shown to be superior to potato starch as excipients in indomethacin solvent deposited. 2) Total amount of indomethacin dissolved from solvent deposition systems at 30 minutes were enhanced about 5 to 23 times compared with that of pure indomethacin. 3) Increased dissotion amount of indomethacin from the solvent deposition systems were observed to be alike in the systems where the drug-to-excipient weight ratios were 1 : 5, 1 : 7 and 1 : 10.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.185-191
• /
• 1999

The polymeric films containing drug and various excipients were fabricated using aqueous-based $Eudragit^{\circledR}$ RS 30D dispersions. The diffusional behaviors and mechanism of the fabricated polymeric film were investigated using Keshary-Chien diffusion cell. The melatonin was used as a model drug. The diffusion behaviors of drug through the fabricated polymeric films were highly dependent on drug concentration in donor part, polymer contents and drug concentration, and the types of plasticizers and solubilizers. The fabricated polymeric films containing excipients and solubilizers could be applied for the controlled release of poorly water-soluble drug and for the preparation of drug-containing latex films for topical or oral drug delivery.