양이온성 천연고분자 물질로서 유전자와 효과적으로 복합체를 형성할 수 있는 저분자량 수용성 키토산(LMWSC)에 유전자 발현 효율을 높이기 위해 histidine을 컨쥬게이션 시킨 유전자 전달체를 제조하였다. 히스티딘-LMWSC의 제조는 무수프탈산으로 LMWSC의 아민기를 보호한 후 히스티딘과 결합한 다음 무수프탈산을 제거하는 반응으로 제조하였다. 제조한 유전자 전달체의 물리화학적 특성은 FT-IR과 NMR 스펙트럼을 통하여 확인하였고, 전기영동 결과로부터 본 실험에서 제조된 유전자 전달체와 DNA가 복합체를 형성하였다는 것을 알 수 있었다. 또한 유전자 전달체의 입자크기는 DLS를 이용하여 측정한 결과 히스티딘-LMWSC-DNA 복합체입자의 크기는 100~200 nm임을 확인하였다. 이로부터 히스티딘을 함유하는 LMWSC가 유전자 전달체로서 사용될 수 있음을 확인하였다.
JSTS:Journal of Semiconductor Technology and Science
/
제14권1호
/
pp.40-47
/
2014
In this paper, $Al_2O_3$ film deposited by thermal atomic layer deposition (ALD) with diluted $NH_4OH$ instead of $H_2O$ was suggested for passivation layer and anti-reflection (AR) coating of the p-type crystalline Si (c-Si) solar cell application. It was confirmed that the deposition rate and refractive index of $Al_2O_3$ film was proportional to the $NH_4OH$ concentration. $Al_2O_3$ film deposited with 5 % $NH_4OH$ has the greatest negative fixed oxide charge density ($Q_f$), which can be explained by aluminum vacancies ($V_{Al}$) or oxygen interstitials ($O_i$) under O-rich condition. $Al_2O_3$ film deposited with $NH_4OH$ 5 % condition also shows lower interface trap density ($D_{it}$) distribution than those of other conditions. At $NH_4OH$ 5 % condition, moreover, $Al_2O_3$ film shows the highest excess carrier lifetime (${\tau}_{PCD}$) and the lowest surface recombination velocity ($S_{eff}$), which are linked with its passivation properties. The proposed $Al_2O_3$ film deposited with diluted $NH_4OH$ is very promising for passivation layer and AR coating of the p-type c-Si solar cell.
One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.
STATEMENT OF PROBLEM: It is known that an anodic oxidation technique, one of the methods for the implant surface treatment, remarkably increased surface area, enhanced wettability and accelerated the initial bone healing. Purpose: This study was performed to evaluate the wettability of anodized titanium surface which has a nanotubular structure, to assess osseointegration after the placement of implant with nano-size tubes on tibia of rats and to analyze quantitatively transferable rhBMP-2 on each surface. MATERIAL AND METHOD: Four different kinds of surface-treated titanium discs (polished (machined surface) group, micro (blasting surface) group, nano (anodizedmachined surface) group, and nano-micro (anodized-blasting surface) group) were fabricated (n=10). Three different media were chosen to measure the surface contact angles; distilled water, plasma and rhBMP-2 solution. After a single drop (0.025 $m{\ell}$) of solution, the picture was taken with the image camera, and contact angle was measured by using image analysis system. For the test of osseointegration, 2 kinds of anodized surface (anodized-machined surface, anodized-blasting surface) implants having 2.0 mm in diameter and 5.0 mm in length inserted into the tibia of Wistar rats. After 3 weeks, tibia were harvested and the specimens were stained with hematoxylin and eosin for histological analysis. To test the possibility of drug delivery, after soaking sample groups in the concentration of 250 ng/$m{\ell}$l of rhBMP-2 for 48 hours, the excess solution of rhBMP-2 were removed. After that, they were lyophilized for 24 hours, and then the rhBMP-2 on the surface of titanium was resolved for 72 hours in PBS. All the extracted solution was analyzed by ELISA. One-way analysis of variance (ANOVA) was performed on the data. RESULTS: The wettability is improved by anodic oxidation. The best wettability was shown on the nano-micro group, and it was followed by nano group, micro group, and polished group. In the histological findings, all implants showed good healing and the new bone formation were observed along the implant surface. After 3 days, nano-micro group delivered the most amount of rhBMP-2, followed by nano group, micro group, and polished group. CONCLUSION: It indicated that anodic oxidation on blasting surface produce functionally graded nano-micro porous structure and enhance hydrophilicity of the surface and osseointegration. The findings suggest that the nano-micro porous structure could be a useful carrier of osteogenic molecules like rhBMP-2.
PVA론 이용한 solution-polymerization법에 의해 mullite싸 cordierite 및 mullite-cordierite 복합분말을 합성한 실험 결과를 바탕으펀, 소결조제로서 $TiO_2$를 액상 첨가한 후 mullite-cordierite 합성분말을 제조하고 그때의 소결특성을 조사하였다. 각 조성에 대해 $1300^{\circ}C$에서 하소한 후 planetary mill로 4시간 분쇄를 행하여 합성분말을 준비하였다. 이 합성분말을 사용하여 cordierite의 분해가 일어나지 않는 $1450^{\circ}C$로 소결을 행하였다. 그 결과, mullite $100\%$인 조성에서는 소결시간에 관계없이 원활한 소결이 이루어지지 않았으나, cordierite의 양이 증가함에 따라 상대밀도가 $98\%$ 이상으로 증가하며 소결성이 향상되어졌다 또한 소결시간이 증가함에 따라 mullite와 cordierite의 비율이 50 : 50인 조성의 경우, 16시간 소결하였을 때 복합체치 치밀화로 인해 190MPa의 강도값과 $3.07{\times}10^{-6}/^{\circ}C$의 열팽창계수값을 나타내었다. 하지만 그 이상의 조성에In-1는 cordierite로 인한 액상의 과다생성으로 인해 소결특성은 좋지 않았다. 소결조제로서의 $TiO_2$ 첨가 영향에 대한 조사에서도 $TiO_2$의 함량이 증가함에 따라 mullite의 주상으로의 성장자 cordierite의 액상 증가가 더 빠르게 일어남이 확인되었지만, 이 때문에 $5wt\%$에서는 오히려 특성값이 저하됨이 확인되었다.
CIGS 화합물 반도체 태양전지에서 광흡수층과 상부투명전극 간의 격자부정합을 낮추기 위해 buffer layer로써 CdS 박막이 적용된다. 높은 광투과도와 낮은 비저항을 갖는 CdS 박막을 제조하기 위하여 화학적 용액 증착법에 의해 반응용액 내의 S 용액의 농도를 고정하고 Cd 용액의 농도를 변화시켜 CdS 박막을 제조하여 특성을 조사하였다. $[S^{2-}]/[Cd^{2+}]$ 농도비에 따른 박막의 구조적, 광학적 및 전기적 특성을 조사하였다. Cd의 농도가 S의 농도보다 높을 경우에는 균일반응이 촉진되어 CdS 결정들이 클러스터 형태로 기판에 흡착되어 결정 크기가 증가하고 광투과율이 감소하였다. 반면, Cd의 농도가 S의 농도보다 낮을 경우에는 용액 내에서 보다 기판위에서 CdS 결정입자가 생성되는 불균일반응에 의해 결정이 생성 및 성장되었고 수백 옹스트롱의 작고 균일한 구형 입자가 생성되었다. Cd 농도가 증가할수록 과잉 Cd가 증가하여 S 공극 생성으로 $[S^{2-}]/[Cd^{2+}]$ 조성비는 감소하였고 CdS 박막의 전하 농도가 증가되어 비저항이 감소되었다.
동북아 항만의 Hub Port 경쟁이 더욱 치열해 지고 있고, 신항 개발이 가속화되면서 공급과잉상태를 초래하게 되어, 부산 북항과 신항이 상생하기에 충분한 물동량 확보가 어려운 시점에서 부산항만은 많은 어려움에 직면하고 있다. 또한 북항은 시설이 노후화되어 있고 초대형선박이 접안하기에 필요한 수심 16m을 확보할 수 없으며, 또한 북항 재개발의 진행과 정책부재로 물동량은 자연스럽게 신항으로의 이전이 가속화되고 있다. 따라서 부산 신항의 추가적인 선석 개장운영과 더불어 부산 북항과의 역할정립 및 연계 발전 방안 모색을 서둘러야 할 시점이다. 북항과 신항의 연계발전 전략은 다음과 같이 요약될 수 있다. 첫째, 북항-신항 연계발전을 위한 모델 정립이 필요하다. 따라서 신항은 16m의 수심과 최첨단시설을 보유하고 있으므로 극대형선(ULCC) 위주로 특화기능을 부여하고, 지속적인 개발과 첨단시설 유치로 세계적인 글로벌 항만으로 발전시켜 나가야 한다. 반면에 북항은 항만리모델링을 통해 피더선 중심의 동북아 중심 항만으로 새로운 기능을 수행하도록 해야하고, 대부분의 공간은 북항 재개발 개념에 포함시켜 시민 친수공간으로 기능을 재부여 하여야 한다. 둘째, 북항의 컨테이너 전용부두를 기능 전환하여 부산항만의 항만별 부두기능을 재배치함으로써 항만기능 집적화를 통한 시너지 창출을 기하여야 한다. 셋째, 북항의 기능이 살아있는 한 북항과 신항의 효율적 연계교통망 확충을 통해 환적화물 처리를 효율적으로 할 수 있도록 하여 부산항만을 동북아 환적중심항만으로 발전시켜 나가야 한다. 넷째, 신항과 부산진해경제자유구역을 연계발전시켜 자체 수요 물동량 창출형 항만배후물류단지를 개발하여야 한다. 다섯째, 물동량 창출을 위해 화주고객, 운송사, 복합운송주선업자 및 관련 기관간 SCM을 구축하여 상호 협력적인 Win-Win 관계를 유지하는 것이 중요하다.
콜레스테롤의 신속하고 정확한 새로운 분석방법을 모색하기 위하여 본 연구에서는 전기적 전도성이 우수한 MWCNT를 이용하여 전극을 제작하였고, 여러 가지 효소고정화 방법을 통해 전기화학적 감응도 분석을 실시하였다. MWCNT의 전도성을 향상시키기 위해 아민기를 도입한 MWCNT-$NH_2$를 제조하였고, MWCNT-$NH_2$/GCE에 PB를 점착하여 작업전극을 제조하였다. 제조한 작업전극은 0.5~500 ${\mu}M$$H_2O_2$ 농도 범위에서 농도가 증가함에 따라 전류가 비례적으로 증가하였고, 검출한계는 0.1 ${\mu}M$로 나타나 전극이 높은 감도를 가지고 있음을 확인하였다. 또한 콜레스테롤 검출을 위해 적합한 효소 반응기를 제작하기 위해 담체인 aminopropyl glass beads, CNBr-activated sepharose, Na-alginate, toyopearl beads에 cholesterol oxidase를 고정화시켜 바이오센서의 콜레스테롤 표준용액에 대한 감응도를 측정한 결과, aminopropyl glass beads과 CNBr-activated sepharose는 1~100 ${\mu}M$ 범위에서 선형관계를 보였으며, Na-alginate는 5~50 ${\mu}M$의 범위에서, toyopearl beads는 1~50 ${\mu}M$ 범위에서 선형관계를 나타내었다. 검출한계는 제작된 효소반응기 모두 1 ${\mu}M$로 나타나 콜레스테롤에 대한 높은 검출력을 보여주었으나, 특히 CNBr-activated sepharose와 Na-alginate를 이용한 효소반응기가 높은 coupling efficiency와 감응도를 보여 콜레스테롤 검출을 위한 본 바이오 센서 시스템에 적합한 것으로 나타났다.
유럽연합이 제정하여 시행하고 있는 Regulation (EC) No 261/2004 ("Regulation")는 비자발적 탑승거부, 운항취소, 운항지연 등의 사안에 대해 항공승객을 보호하는데 주목적을 두고 있다. 이와 관련하여 항공편 지연으로 불편을 겪은 승객들이 탑승거부, 운항취소에 대해 명시적으로 적용되는 제7조에 따른 금전 보상청구권을 청구한 사건들이 있었다. 이에 대해 유럽연합 사법법원(Court of Justice of the European Union, CJEU)은 승객들에게 시간적인 손실이 발생한다는 점에서 항공편이 운항취소된 경우와 운항지연된 경우는 동일하므로, 당초 항공사가 설정한 총 비행시간 보다 3시간이 초과되어 운항이 지연된 경우에는 해당 승객이 자발적 탑승거부나 운항취소와 마찬가지로 금전손실 보상청구권을 행사할 수 있다고 판단하였다. Regulation상에 운항지연의 경우 제7조의 보상청구권이 적용된다는 명시규정이 존재하지 않음에도 불구하고, 승객의 보호라는 Regulation의 입법취지를 고려하여 법원이 적극적으로 그러한 권리를 긍정한 것이다. 이러한 법원의 관점은 규정의 유추해석이라는 비판을 받을 가능성도 있지만, Regulation에 산재되어 있는 운항취소와 운항지연에 관한 일괄적 취급에 관한 근거 및 승객보호라는 Regulation의 입법취지를 고려할 때 설득력을 가진다. 더욱이 법원은 운항지연의 경우 Regulation과 몬트리올 협약이 동일한 내용을 규정하고 있지 않으므로 몬트리올 협약 제29조는 이 경우에 적용되지 않고 양자는 충돌되지 않는다고 보고 있다. 즉, Regulation은 항공편의 지연이라는 사실에 관한 승객의 불편과 손실을 보호하는 규범인 반면, 몬트리올 협약은 지연이라는 사실로 인하여 인과관계가 인정되는 범위에서 발생된 손해에 관한 배상을 규정하고 있다는 것이다. 위와 같은 유럽연합의 규정과 법원의 견해는 승객보호에 관한 진보적인 성향을 잘 보여주는 선구적인 내용이라고 할 수 있다. 구체적인 규정 없이 승객보호를 위한 절차와 계획의 수립의무만을 선언적으로 규정하고 있는 현재의 우리나라 항공법이 참고할 필요가 있을 것으로 본다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.