• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.2
• /
• pp.213-223
• /
• 2000

In order to establish the exact determination method of amino nitrogen in fish sauces, we compared the amino-nitrogen content in salt-fermented sand lance sauces according to the measuring methods and investigated influencing factors on the procedure of measuring. Amino-nitrogen content was increased in both sand lance sauce during fermentation periods and commercial sand lance sauces. Amino-nitrogen in fermented sand lance sauces for 12 months occupied 88.7% and 75.2% for the trinitrobenzene sulfonic acid(TNBS) method and the Copper-salt method, compare to the Formol method. The ratio of amino-nitrogen/total nitrogen in fermented sand lance sauce for 12 months was higher than in commercial sand lance sauces. The determination of amino-nitrogen by the TNBS method was influenced by concentration of salt in sand lance sauce. The amino-nitrogen content was the highest in the Formol method and followed by the TNBS method and the Copper-salt method without the influence of heating time and monosodium glutamate(MSG) concentration. We concluded that the determination of amino nitrogen in fish sauces was correct to measure with the TNBS method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.397-403
• /
• 2008

In this paper, the mixer was implemented in the non-radiative dielectric waveguide that is the main component of 60 GHz band radio telecommunications equipment which a demand increases for the purpose of point-to-point communication network. As to the manufacture of the non-radiative dielectric waveguide mixer, it was the implementation of the dielectric line combiner to be most difficult. The thing which that gives shape to the curvature which is the dielectric line determined and the to place in the exact interval thing are easy. For this reason, it was very difficult to make in order to have the regular performance in the case of the mixer having the dielectric line combiner. In this paper, since the dielectric line combiner was replaced with the waveguide directional coupler and the manufacture was possible through a processing it had the characteristic that a combiner is fixed. In result, the productivity of a mixer was innovatively improved. The design frequency of the mixer implemented through this paper RF and LO are $51{\sim}64\;GHz$. IF Is $DC{\sim}\;GHz2$. The down conversion loss toward the RF input of $60{\sim}62\;GHz$ was measured by $10{\pm}1\;dB$ in the condition that LO is 10 dBm, 60 GHz.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.31-40
• /
• 2017

Absolute nodal coordinate formulation was developed in the mid-1990s, and is used in the flexible dynamic analysis. In the process of deriving the equation of motion, if the order of polynomial referring to the displacement field increases, then the degrees of freedom increase, as well as the analysis time increases. Therefore, in this study, the primary objective was to reduce the analysis time by transforming the dimensional equation of motion to a non-dimensional equation of motion. After the shape function was rearranged to be non-dimensional and the nodal coordinate was rearranged to be in length dimension, the non-dimensional mass matrix, stiffness matrix, and conservative force was derived from the non-dimensional variables. The verification and efficiency of this non-dimensional equation of motion was performed using two examples; cantilever beam which has the exact solution about static deflection and flexible pendulum.

• Journal of Environmental Impact Assessment
• /
• v.23 no.6
• /
• pp.417-431
• /
• 2014

There is a Conjoint Analysis to estimate the environmental value of natural river restoration project of Inchon Metropolitan City's small River: Gong-chon Stream, Gul-po Stream, Seung-gi Stream, Jang-su Stream. In order to find out the optimal expense condition, we tried to estimate the possible payable amount. According to the analysis, almost all people are willing to pay 15,000 Won. In case of the river types, the people liked 10 cm's depth of water and there should be brook trail, convenient facilities and flood plain at the stream edge space. But it is impossible to build these facilities with minimum fare 15,000 Won per a household. If the necessary expenses set high, the tax resistance of the local residents will be increased. So, in consideration of the analytical results of the attribute level, we draw five alternatives. This study is based on the results of Incheon metropolitan City residents' survey, and there is Conjoint Analysis to estimate the environmental value of natural-type river project of Incheon metropolitan City. If it is reflected the special assume factors of this study, and if there is exact environmental value estimation of the various river quality through different analysis, then it will become a study of high utilizing.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.60-61
• /
• 2004

Metabolic engineering is now a well established discipline, used extensively to determine and execute rational strategies of strain development to improve the performance of micro-organisms employed in industrial fermentations. The basic principle of this approach is that performance of the microbial catalyst should be adequately characterised metabolically so as to clearlyidentify the metabolic network constraints, thereby identifying the most probable targets for genetic engineering and the extent to which improvements can be realistically achieved. In order to harness correctly this potential, it is clear that the physiological analysis of each strain studied needs to be undertaken under conditions as close as possible to the physico-chemical environment in which the strain evolves within the full-scale process. Furthermore, this analysis needs to be undertaken throughoutthe entire fermentation so as to take into account the changing environment in an essentially dynamic situation in which metabolic stress is accentuated by the microbial activity itself, leading to increasingly important stress response at a metabolic level. All too often these industrial fermentation constraints are overlooked, leading to identification of targets whose validity within the industrial context is at best limited. Thus the conceptual error is linked to experimental design rather than inadequate methodology. New tools are becoming available which open up new possibilities in metabolic engineering and the characterisation of complex metabolic networks. Traditionally metabolic analysis was targeted towards pre-identified genes and their corresponding enzymatic activities within pre-selected metabolic pathways. Those pathways not included at the onset were intrinsically removed from the network giving a fundamentally localised vision of pathway functionality. New tools from genome research extend this reductive approach so as to include the global characteristics of a given biological model which can now be seen as an integrated functional unit rather than a specific sub-group of biochemical reactions, thereby facilitating the resolution of complexnetworks whose exact composition cannot be estimated at the onset. This global overview of whole cell physiology enables new targets to be identified which would classically not have been suspected previously. Of course, as with all powerful analytical tools, post-genomic technology must be used carefully so as to avoid expensive errors. This is not always the case and the data obtained need to be examined carefully to avoid embarking on the study of artefacts due to poor understanding of cell biology. These basic developments and the underlying concepts will be illustrated with examples from the author's laboratory concerning the industrial production of commodity chemicals using a number of industrially important bacteria. The different levels of possibleinvestigation and the extent to which the data can be extrapolated will be highlighted together with the extent to which realistic yield targets can be attained. Genetic engineering strategies and the performance of the resulting strains will be examined within the context of the prevailing experimental conditions encountered in the industrial fermentor. Examples used will include the production of amino acids, vitamins and polysaccharides. In each case metabolic constraints can be identified and the extent to which performance can be enhanced predicted

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.117-127
• /
• 2008

The characteristics of phosphate adsorption-desorption on kaolinite was studied by batch adsorption experiments and detailed adsorbed state of phosphate on kaolinite surface was investigated using ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectroscopy. The phosphorous contents were measured using UV-VIS-IR spectrophotometer with 820 nm wavelength. The adsorbed P was generally increased with increasing pH value in the range of pH 4 to pH 9, however it is not distinct. Moreover the adsorbed P was significantly changed with different initial phosphate concentration. The adsorption isotherms were well fitted with the Langmuir equation, Temkin equation, and Freundlich equation in descending order. The maximum Langmuir adsorption capacity of kaolinite KGa-2 is 232.5 ($204.1{\sim}256.5$) mg/kg and has very higher value than that of kaolinite KGa-1b. Most of adsorbed phosphate on kaolinite were not easily desorbed to aqueous solution, but might fixed on kaolinite surface. However it needs further research about the exact desorption experiment. It was impossible to recognize phosphorous adsorption bands on kaolinite in ATR-FTIR spectrum from kaolinite bands themselves, because the absorption peaks of phosphorous have very similar positions with those of kaolinite, and the intensities of the former were very weak in comparison with those of the latter.

• Journal of Global Scholars of Marketing Science
• /
• v.8
• /
• pp.341-373
• /
• 2001

Firms are confronting the age of an infinite competition. In order to respond to the rapidly changing business environment and make a success and survival in the international and domestic securities market, firms must take a consideration on the stockholders value-oriented philosophy which has greatly contributed not only to the maximization of corporate profits but also to the stability of financial markets. To pursue stockholders value-oriented philosophy, a firm should build strong relationship with investors by providing exact information of firm's state, financial statement, management policy. Stockholders value-oriented philosophy contributes to long-term growth and development of the firm as well as efficient equity financing and friendship with stockholder. IR is the key factor to attain successful implementation of company's objective. It should be equipped with the most suitable organization and qualified man-power for IR activities. The purpose of this study was to examine the relationship between IR and relationship marketing management. Strategic implications of this study are as follows: First, This study provides a new explanations of IR activities in Relationship Marketing Management. Second, IR activities were key determinants of Trust and Commitment. That means the more a firm does IR activities, the more Trust and Commitment a firm has for their investors. Third, The variables of trust and commitment are highly related to marketing and financial success. IR have a positive effect on a company total value and its cost of capital relative to that of the overall market.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.106-112
• /
• 1997

This study measured the ignition limits of methane-air, propane-air, ethylene-air, and hydrogen-air mixture gases by discharge spark of D.C. power resistive circuit. The used experimental device is the IEC type spark ignition test apparatus, it consists of explosion chamber and supply -exhaust system of mixture gas. Mixture gases (methane-air, propane-air, ethylene-air, and hydrogen-air) were put into explosion chamber of IEC type spark ignition test apparatus, then it was confirmed whether ignition was made by 3,200 times of discharge spark between tungsten electrode and cadmium electrode. The ignition limits were found by increasing or decreasing the value of current. For the exact experiment, the ignition sensitivity was calibrated before and after the experiment in each condition. The ignition limits were found by changing the value of concentration of each gas-air mixture in D.C. 24 [V] resistive circuit. As the result of experiment, it was found that the minimum ignition limit currents exist at the value of methane-air 8.3 [$Vol\%$], propane-air 5.25[$Vol\%$], ethylene-air 7.8 [$Vol\%$], and hydrogen-air 21[$Vol\%$] mixture gases. For each the minimum ignition concentration of gases, the relationships between voltage and minimum ignition current were found. The results are as follows. - The minimum ignition limits are decreasing in the order of methane, propane, ethylene, and hydrogen. - The value of ignition current is inversely proportional to the value of source voltage. - The minimum ignition limit currents increase sharply at more than 2 [A]. The reason is caused by overheating the electrode.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.5
• /
• pp.635-643
• /
• 2018

This paper propose a method to identify the motor parameters and improve input voltage error which affect the low speed position error of the back-emf(back electromotive force) based sensorless algorithm and to secure the operation reliability and stability even in the case where the load fluctuation is severe and the start and low speed operation frequently occurs. In the model-based observer used in this paper, stator resistance, inductance, and input voltage are particularly influential factors on low speed performance. Stator resistance can cause resistance value fluctuation which may occur in mass production process, and fluctuation of resistance value due to heat generated during operation. The inductance is influenced by the fluctuation due to the manufacturing dispersion and at a low speed where the change of the current is severe. In order to find stator resistance and inductance which have different initial values and fluctuate during operation and have a large influence on sensorless performance at low speed, they are commonly measured through 2-point calculation method by 2-step align current injection. The effect of voltage error is minimized by offsetting the voltage error. In addition, when the command voltage is used, it is difficult to estimate the back-emf due to the relatively large distortion voltage due to the dead time and the voltage drop of the power device. In this paper, we propose a simple circuit and method to detect the voltage by measuring the PWM(Pulse Width Modulation) pulse width and compensate the voltage drop of the power device with the table, thereby minimizing the position error due to the exact estimation of the back-emf at low speed. The suitability of the proposed algorithm is verified through experiment.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.147-155
• /
• 2006

The crystal structures of fully dehydrated $K_3Na_8H-A(R_1=0.0478,\;R_2=0.0458\;and\;a=12.257(1){\AA})$ have been studied by single-crystal x-ray diffraction methods in the cubic space group. Pm3m in order to understand the structure of the zeolite as a gas storage medium and the mechanisms based on the encapsulation and decapsulation processes of gas molecules. In the crystal structures of dehydrated $K_3Na_8H-A$, three $K^+$ ions per unit cell are located on the 8-oxygen ring(0.0, 0.4531, 0.4531) and eight $Na^+$ ions per unit cell are located near the centers of 6-oxygen rings. Each $K^+$ ions on the 8-ring is $2.87(2){\AA}$ and $2.79(1){\AA}$ away from two kinds of framework oxygen atoms. These values are more realistic than previously known values in $K_{12}Na-A$. The exact positions of $K^+$ ions are ca. $0.8{\AA}$ away from the centers of the 8-rings which are previously reported as the preferred location of $K^+$ ions. Because the zeolites frameworks are stabilized as the results, more effective controls of gas molecules at encapsulation, decapsulation, and storage are achieved. Additionally, the available storage volumes are also maximized and more volume of gases can be stored in the materials. Therefore, oxygen storage bottles in hospital can be minimized and portable oxygen bottles for patients in emergency can be developed by using the materials.