• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.45-57
• /
• 1993

In case of the analysis of continuous beams, the complexity increases greatly as the number of spans becomes large, and even the slope-deflection method or the moment distribution method is subject to restriction in its utilization. In this study, a revised exact method is developed for the analysis of continuous beams up to four spans, and a new approximate method is proposed for the multi-span continuous beams. This approximate procedure is very simple in its application and provides very satisfactory results which converge closely on the exact ones. These methods can also be used conveniently especially for drawing influence lines for the support moments of continuous beams, and their value is fully appreciated because of notable simpleness as compared with the conventional method which is mainly based on the Muller-Breslau principle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.39-49
• /
• 2003

The delta operator approach and the singular perturbation technique are introduced. The former reduces the round-off error in the numerical computation. The latter reduces computing time by decoupling the original system into the fast and slow sub-systems. The aircraft dynamics consists of the Phugoid and short-period motions whether its model is longitudinal or lateral. In this paper, an approximated solutions of lateral dynamic model of Beaver obtained by using those two methods in compared with the exact solution. For open-loop system and closed-loop system, and approximated solution gets identical to the exact solution with only one iteration and without iteration, respectively. Therefore, it is shown that implementing those approaches is very effective in the flight dynamic and control.

• School Mathematics
• /
• v.11 no.3
• /
• pp.513-526
• /
• 2009

The purpose of this paper intuitively shows the exact and logical explanation of Independent Event and Dependent Event. In actual classrooms, teachers have difficulty in describing the connection between those events and real life. Some teachers have wrong perceptions on the definition of those events. For example, they may not realize exactly what P(B A)=P(B) means and may not explain intuitively the original meaning of why it is independent event. Also they believe that Independent Event and Dependent Event do not always match with real life. This paper, therefore, tries to prove intuitively the exact meanings of those events in the Verbal Form with some examples and it proves that those events exactly match with real life. It is expected that this paper will greatly contribute to the improvement of probability education.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.4
• /
• pp.139-155
• /
• 2011

The failure of distinguishing homographs in describing relations of individual authors and relations of authorship(i.e. distinction of persons with the same name or persons of the same literary author's name) will cause difficulties of retrieving exact information. It is because relations of automorphism cannot be formed between the two sets mentioned above. Therefore, it is ultimately necessary to set up the criteria or tools to distinguish homographs in order to retrieve more exact information. In the past, some efforts were made to develop authority data in order to solve the homograph problems by individual libraries, documents and portal sites in Korea. It is well understood that developing authority data by an individual institution was very difficult with no criteria or no rules to clarify the homograph problems at the national level. This study is to develop ways of recognizing individual names including subject words and proper nouns. The results of the study will present methods of distinguishing and describing homographs between individual author sets, and authorship sets particularly focused on the areas of arts and popular culture.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.263-268
• /
• 2002

The image quality of imageguide depends on the structure, material, length of microfibers and the phenomena such as cross-talk and leaky ray between adjacent fibers. These Parameters should be considered as important factors in the image transmission qualify of fibers. However it is considered to be very difficult to assess all the parameters in a consistent way Therefore. two image characteristics, image resolution and image brightness are measured and analyzed to determine the image quality of imageguide. But the exact methods to measure two image characteristics of imageguide are not reported. In this study, the image brightness of imageguide for ultrathin endoscope is determined by measuring of the numerical aperture. the packing fraction and the attenuated power ratio of imageguide. Especially it is possible to obtain more exact results from measuring the numerical aperture of whole image guide than those from theoretical calculation of the single microfiber in an image guide. The image brightness of the image guide which has $3.1\mu m$ microfibers is about 37% less than that with $4.1\mu m$ microfibers.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.97-102
• /
• 2012

In general, one of the methods used to measure distortion is to use the full image of the regular pattern. However, because of low accuracy, this method is mainly used for an optical system such as a camera.. In order to measure distortion with high accuracy less than 1um, one can use the method of measuring the exact position of a mask image. In this case, a high accuracy stage with a laser encoder is required. In this paper, we investigate measurement of the distortion of high accuracy with a simple manual stage. The main idea is that we split and measure the mask image with the overlapping area by using CCD or CMOS, and then we get an exact position of the mask image by integrating the adjacent split images. We use the Canny Edge Detection method to get the position information of the mask image and we researched the process to exactly calculate distortion by using coordinate transformations and a least square method.

• Korean Journal of Acupuncture
• /
• v.20 no.4
• /
• pp.99-119
• /
• 2003

Objectives : The Jap Byoung(雜病) of the Young Chu(靈樞), one of the classical book of oriental medicine contains symptoms and remedies for various diseases that can be seen on human body. But it is too difficult to understand the Jap Byoung(雜病), because it is written in old chinese and there are many printer's error and omissions or adds in this book. As a consequence of above reason, the writer of this article has researched to find out the exact meaning of that. Methods : So in this part we study a woodblock-printed book of successive generation and view of annotators, and add adding notes, adjustment, translation to exact comprehension of the original text. Results & conclusions : The principle ideas of the thesis can be summarized as follows: The Jap Byoung(雜病) is consist of five part. In chapter 1, we present symptoms occurred by the upstream current of Qi(氣逆) and their treatments by taking meridian flowing the body parts on which the symptoms occur. In chapter 2, we deal with symptoms such as ikgun(?乾), a pain of the knee(膝中痛), huby(喉痺), epistaxis(?血), lumbago(腰痛), anger(怒), a pain of the jaw(痛), a pain of the nape(項痛) and their remedies. In chapter 3, since abdominal inflation occurs when the Qi(氣) of the five viscera(五臟) is damaged or go upstream, I discussed that the treatment should be given by taking the meridian accordingly. In chapter 4, we deal with the remedy for heartache, and different meridians to be taken by symptom, and parts on which needle to be used, and detailed remedies. In chapter 5, we present other diseases, detailed body parts to be cured and remedies by referring symptoms for a pain of the jaw(痛), the upstream current of Qi(氣逆), hiccup, etc. Especially, we introduce a part of Doinbup(導引法) for wegurl(?厥) and remedies for hiccup such as inducing sneeze by stimulating nostrils, holding one's breath, etc.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.17-23
• /
• 1976

Some methods of analysis of rectangular plates under distributed load of various intensity with interior supports are presented herein. Analysis of many structures such as bottom, side shell, and deck plate of ship hull and flat slab, with or without internal supports, Floor systems of bridges, included crthotropic bridges is a problem of plate with elastic supports or continuous edges. When the four edges of rectangular plate is simply supported, the double Fourier series solution developed by Navier can represent an exact result of this problem. If two opposite edges are simply supported, Levy's method is available to give an "exact" solution. When the loading condition and supporting condition of a plate does not fall into these cases, no simple analytic method seems to be feasible. Analysis of a simply supported rectangular plate under irregularly distributed loads of various intensity with internal supports is carried out by applying Navier solution well as the "Principle of Superposition." Finite difference technique is used to solve plates under irregularly distributed loads of various intensity with internal supports and with various boundary conditions. When finite difference technique is applied to the Lagrange's plate bending equation, any of fourth order derivative term in this equation produces at least five pivotal points leading to some troubles when the resulting linear algebraic equations are to be solved. This problem was solved by reducing the order of the derivatives to two: the fourth order partial differential equation with one dependent variable, namely deflection, is changed to an equivalent pair of second order partial differential equations with two dependent variables. Finite difference technique is then applied to transform these equations to a set of simultaneous linear algebraic equations. Principle of Superposition is then applied to handle the problems caused by concentrated loads and interior supports. This method can be used for the cases of plates under irregularly distributed loads of various intensity with arbitrary conditions such as elastic supports, or continuous edges with or without interior supports, and this method can also be solve the influence values of deflection, moment and etc. at arbitrary position of plates under the live load.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.229-236
• /
• 2009

UWB signal with high resolution capability can be used to estimate ranging and positioning in wireless personal area networks. The clock frequency differences of nodes have serious affects on asynchronous ranging methods to estimate locations of mobile nodes. The specification of high rate UWB describes successive TWR method with the estimation of a relative clock frequency offset. In this paper, we complete the ranging equations using relative frequency offset and time information, and propose a method to estimate the exact frequency offsets. We evaluate the ranging algorithms with simulation. The results show that the performances of the algorithms using frequency offsets are very close without noise. But, at noise environment, the method of exact frequency offsets shows better performance than that of relative frequency offsets.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.1
• /
• pp.7-19
• /
• 1999

The energy transfer between sea-wave components by way of nonlinear wave-wave interactions plays a central role in spectral evolution. Since huge calculation time is required to exact computation of the resulting Boltzmann integral, however, the exact nonlinear energy transfer has not been directly introduced into operational wave models. Thus, effective calculation methods were examined in the present study which exploit the scale property of a scattering coefficient and the detailed balance of interactions. The improved Webb's method (IWM) has inherent stability because singularities degenerate into a negligible point. The improved Masuda's method (IMM) makes a quasi-analytical treatment of the inherent singularities and requires only 1.3 seconds of computer time via Pentium 300MHz processor. The IMM is, therefore, projected to be very useful for theoretical researches in spectral evolution with fetch- or duration-limited situations.