• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.163-170
• /
• 1998

The differential quadrature method (D.Q.M.) is applied to computation of eigenvalues of small-amplitude free vibration for horizontally curved beams including a warping contribution. Fundamental frequencies are calculated for a single-span, curved, wide-flange beam with both ends simply supported or clamped, or simply supported-clamped end conditions. The results are compared with existing exact solutions and numerical solutions by other methods for cases in which they are available. The differential quadrature method gives good accuracy even when only a limited number of grid points is used.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2003

A new code, LS code, was proposed for the IMT-2000 CDMA system. The code has special properties during a specific time interval: 1) perfect autocorrelation, and 2) perfect crosscorrelation. Perfect autocorrelation means maximum autocorrelation for zero time-offset and zero autocorrelation for all other times during a specific time interval. Moreover, perfect crosscorrelation means that the crosscorrelation has zero value during a certain time, you can remove all the MAI within that time. However, the detailed properties of LS code and its exact generation method have been previously unknown. Therefore, we investigate the LS code in regards to its exact generating method, properties, and performances in this paper.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3301-3303
• /
• 1999

A new method of measuring residual stresses in micromachined films using beam or ring structures is proposed. Using the proposed method, more exact value of residual stress can be obtained without any ambiguities in conventional buckling method. Theoretical modeling with respect to this method is described, and experiment is performed. The structure and fabrication process in this paper are simple and widely used in surface micromachining. Therefore, it is possible to obtain a synchronous measurement. A synchronous and reason -able estimation of residual stresses in micromachined films enables us to obtain the prediction of more exact performance in micromachined devices.

• Journal of Environmental Impact Assessment
• /
• v.23 no.1
• /
• pp.29-37
• /
• 2014

Exact and precise noise measurement is the basis for the reduction measure R&D, impact assessment and prediction modeling for railway noise. In this study, research trend as well as national and international noise measurement standard are investigated. For the estimation of vertical radiation characteristics of railway noise, specially devised zig was used. From the noise measurement and analysis, exact noise height radiated from the railway was characterized. The obtained results will be used for the suggestion of the height of microphone position of railway noise measurements.

• Journal of Theoretical and Applied Mechanics
• /
• v.1 no.1
• /
• pp.29-67
• /
• 1995

A procedure is formulated, in this paper, to compute the bifurcation modes born by the stability change of normal modes, and to compute the forced responses associated with bifurcation modes in inertially and elastically coupled nonlinear oscillators. It is assumed that a saddle-loop is formed in Poincare map at the stability chage of normal modes. In order to test the validity of procedure, it is applied to one-to-one internal resonant systems in which the solutions are guaranteed within the order of a small perturbation parameter. The procedure is also applied to the exact system in which normal modes are written in exact form and the stability of normal modes can be exactly determined. In this system the stability change of normal modes occurs several times so that various types of bifurcation modes are created. A method is described to identify a fixed point on Poincare map as one of bifurcation modes. The limitations and advantage of proposed procedure are discussed.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.177-180
• /
• 2002

To show a retina shape and thickness on the computer monitor, a laser has been used in Scanning Laser Ophthalmoscope(SLO) equipment using the travelling difference. This method requires exact synchronous control of laser travelling in optic system to show a clear 3-dimensional image of retina. To obtain this image, this exact synchronism is very important for making the perfect plane scanning. In this study, a synchronous control of the galvanometer using deadbeat torque observer to make 3-dimensional retina image is presented. For the more, a very simple mathematical model of the galvanometer is approved by experimental result.

• IE interfaces
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2011

This study considers paging schemes that can page some cells or only one cell within the location area to reduce paging cost by using PAs (Paging Agents) and compares their performances by using a new analytic method. There are three ways of paging schemes using PAs; BSPA (Base Staton Paging Agent), 2SPA (2-Step Paging Agent), LAPA (Location Area Paging Agent). This study proposes exact performance of BSPA and 2SPA using a new analytic method based on Markov chain modeling to find the most efficient paging scheme. Numerical results for various circumstances are presented by using proposed analytic method to select a proper paging scheme in mobile communication networks.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.5
• /
• pp.50-56
• /
• 2015

As rotor position is a reference of coordinate in vector control of PMSM, the information of exact rotor position is required. To measure the position of motors, hall-effect sensors, encoders, resolvers, etc. are used. Among these sensors, resolvers have good endurance in the variation of circumstance and can be used in a wide range of temperature, but resolvers are less exact than encoders. In addition, resolvers have a drawback that the output signal contains periodic error components. Thus, this paper proposes a compensation method for the unique position error in resolvers using Kalman filter to achieve high performance control of PMSM. The validity of the proposed scheme is demonstrated through simulation studies.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.46-58
• /
• 1999

The exact distributions of the sample variance $(S^2_n)$ and the estimator ($\hat{C}_p$) of the process capability index are not easily obtained in general. In this paper, the approximations using saddlepoint techniques to the distributions of these statistics are suggested and compared with the other approximation methods. For comparisons, the exact values obtained by extensive Monte-Carlo (simulation) studies are also given. As a result, the suggested approximation methods are very accurate even in moderate or small sample sizes and are easy to use. Also, the suggested methods can be adapted to approximate the distributions of more complicated statistics, including $\hat{C}_pk$ ,$\hat{C}_pm$, etc.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.134-137
• /
• 2005

In this paper, a continuous contact treatment has been considered during FE-analysis of the sheet metal forming processes. Because the simulation is usually performed stepwise, the status of contact can change suddenly. In case of implicit scheme, the increment of punch stroke can be chosen as large value. For exact assessment of contact force and friction force between die and sheet, the continuous contact treatment is proposed. The virtual surface of sheet metal is modeled by NURBS curves or surfaces in order to calculate exact contact area and penetration depth. From the geometrical evaluation of contact behavior, additional contact pressure is imposed to the element. The deformation of bending process and hydroforming process are analyzed based on this scheme.