• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.125-130
• /
• 2017

Since field control equipment such as PLC has no function to log key event information in the log, it is difficult to analyze the accident. Therefore, it is necessary to secure information that can analyze when a cyber accident occurs by logging the main event information of the field control equipment such as PLC and IED. The protocol analyzer is required to analyze the field control device (the embedded device) communication protocol for event logging. However, the conventional analyzer, such as Wireshark is difficult to process the data identification and extraction of the large variety of protocols for event logging is difficult analysis of the payload data based and classification. In this paper, we developed a system for Big Data based on field control device communication protocol payload data extraction for event logging of large studies.

• Atmosphere
• /
• v.16 no.3
• /
• pp.203-213
• /
• 2006

The objective of this paper is to investigate the effects of physical parameterization on the simulation of a snowfall event over Korea caused by air-mass transformation by using the PSU/NCAR MM5. A heavy snowfall event over Korea during 3-5 January 2003 is selected. In addition to the control experiments employing simple-ice microphysics scheme, MRF PBL scheme, and original surface layer process, three consequent physics sensitivity experiments are performed. Each experiment exchanges microphysics (Reisner Graupel), boundary layer (YSU PBL) schemes, and revised surface layer process with a reduced thermal roughness length for the control run. The control run reproduces an overall pattern of snowfall over Korea, but with a high bias by a factor of about 2. As revealed in the previous studies, the cloud microphysics and PBL parameterizations do not show a significant sensitivity for the case of snowfall. A more sophisticated cloud processes does not reveal a discernible effect on the simulated snowfall. Further, high bias in snowfall is exaggerated when a more realistic PBL scheme is employed. On the other hand, it is found that the revised surface layer process plays a role in improving the prediction of snowfall by reducing it. Thus, it is found that a realistic design of surface layer physics in mesoscale models is an important factor to the reduction of systematic bias of the snowfall over Korea that is caused by air-mass transformation over the Yellow sea.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.3
• /
• pp.190-195
• /
• 2001

The advance of computer, network, and Internet technology enables the control systems to process the massive data in the distributed computing environments. To implement and maintain the software in distributed environment, the component-based methodology is widely used. This paper proposes the middleware architecture for the distributed computer control system. With the proposed middleware services, it is relatively easy to maintain compatibility between products and to implement a portable control application. To achieve the compatibility between heterogeneous systems, the proposed architecture provides the communication protocols based on the XML with lightweight event-based service.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2015

Aquifer storage transfer and recovery (ASTR) is a type of managed aquifer recharge which entails injecting water into a storage well and recovering it from a different well. It has effects of natural purification when injected water passes through aquifer medium, and can be a good way of supplying water especially in a region with poor surface water quality. This study is about an on-going effort to introduce ASTR as a solution to source water problems in coastal areas. A pilot study is being conducted in the delta of the Nakdong River. A proactive management system is incorporated to ensure the water qulity in the process of drinking water process. The system is based on the Hazard Analysis and Critical Control Point (HACCP) which is a tool originated from the food industry in order to assess hazards and establish control systems for the safety of food product. In this paper, we analyze hazardous events which can occur in the entire water supply system using ASTR as a first step to the incorporation of HACCP to drinking water production process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1509-1521
• /
• 2011

WfMC, which is one of the international standardization organizations leading the business process and workflow technologies, has been officially released the BPAF1.0 that is a standard format to record process instances' event logs according as the business process intelligence mining technologies have recently issued in the business process and workflow literature. The business process mining technologies consist of two groups of algorithms and their analysis techniques; one is to rediscover flow-oriented process-intelligence, such as control-flow, data-flow, role-flow, and actor-flow intelligence, from process instances' event logs, and the other has something to do with rediscovering relation-oriented process-intelligence like process-driven social networks and process-driven affiliation networks from the event logs. The current standardized format of BPAF1.0 aims at only supporting the control-flow oriented process-intelligence mining techniques, and so it is unable to properly support the relation-oriented process-intelligence mining techniques. Therefore, this paper tries to extend the BPAF1.0 so as to reasonably support the relation-oriented process-intelligence mining techniques, and the extended BPAF is termed BPAF2.0. Particularly, we have a plan to standardize the extended BPAF2.0 as not only the national standard specifications through the e-Business project group of TTA, but also the international standard specifications of WfMC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.1
• /
• pp.28-35
• /
• 1995

The fluid flow for a energy transfer is essential for the design and operation of power plants, petrochemical plants and ships including a process. When the operating conditions of a plant are changed or any transitional event occured, the flow controls of a fluid must be performed to follow the new operating state or mitigate the results of a event. Generally these flow controls to accommodate the new operating state of a plant are made by the use of various valves. The refore the design of valves and the related techniques are very important to the system and component designs. However the system and component design are not familiar with the practical theory of the valve since the derivative procedures of the flow equations in a valve are difficult and it is not easy to found the theoretical foundamentals and informations about the design of a valve from the present references. In this study the flow equations applicable to a valve for liquid are theoretically derived in detail. And the definition of valve reynolds number and its boundary values between the tubulent and laminar flow is described compared with the values of a circular pipe flow.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.177-186
• /
• 2016

When an event is occurred in a nuclear power plant (NPP), the NPP operator reports it referred by the regulation on reporting and public announcement of accidents and incidents. Some of the events do not need to be reported because they are not included in the reporting criteria of the regulation. However, it is necessary that they should be managed effectively because the accident can be occurred by the recurrence of a lot of them as precursors. Among the events not included in the reporting criteria of the regulation, near miss is the event that is not occurred but can generate a significant consequence. This can provide the cause of the event which does not result an accident. So, it is able to offer insightful knowledges to prevent higher level events about the function and process of NPP. The objective of this study is to analyze the issues of near miss events, prepare the defence against the risk, and improve the management process of NPP. To achieve it, this study performed to analyze the management structure and status of near miss events as well as the accident reporting system of the domestic and foreign regulation bodies. In case of Korea, the status was analyzed by quantitative data, licensee event reports and procedures. Based on these, we could find the causes that near miss events were not managed effectively. Then, systematic alternatives that reflected the perspective of man, technology and organization were drawn.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.87-96
• /
• 2019

In this paper, we propose a MapReduce-supported clustering technique for collecting and classifying distributed workflow enactment event logs as a preprocessing tool. Especially, we would call the distributed workflow enactment event logs as Workflow BIG-Logs, because they are satisfied with as well as well-fitted to the 5V properties of BIG-Data like Volume, Velocity, Variety, Veracity and Value. The clustering technique we develop in this paper is intentionally devised for the preprocessing phase of a specific workflow process mining and analysis algorithm based upon the workflow BIG-Logs. In other words, It uses the Map-Reduce framework as a Workflow BIG-Logs processing platform, it supports the IEEE XES standard data format, and it is eventually dedicated for the preprocessing phase of the ${\rho}$-Algorithm that is a typical workflow process mining algorithm based on the structured information control nets. More precisely, The Workflow BIG-Logs can be classified into two types: of activity-based clustering patterns and performer-based clustering patterns, and we try to implement an activity-based clustering pattern algorithm based upon the Map-Reduce framework. Finally, we try to verify the proposed clustering technique by carrying out an experimental study on the workflow enactment event log dataset released by the BPI Challenges.

• Journal of Information Processing Systems
• /
• v.8 no.2
• /
• pp.213-240
• /
• 2012

Safety critical systems, real time systems, and event-based systems have a complex set of events and their own interdependency, which makes them difficult to test ma Safety critic Safety critical systems, real time systems, and event-based systems have a complex set of events and their own interdependency, which makes them difficult to test manually. In order to cut down on costs, save time, and increase reliability, the model based testing approach is the best solution. Such an approach does not require applications or codes prior to generating test cases, so it leads to the early detection of faults, which helps in reducing the development time. Several model-based testing approaches have used different UML models but very few works have been reported to show the generation of test cases that use events. Test cases that use events are an apt choice for these types of systems. However, these works have considered events that happen at a user interface level in a system while other events that happen in a system are not considered. Such works have limited applications in testing the GUI of a system. In this paper, a novel model-based testing approach is presented using business events, state events, and control events that have been captured directly from requirement specifications. The proposed approach documents events in event templates and then builds an event-flow model and a fault model for a system. Test coverage criterion and an algorithm are designed using these models to generate event sequence based test scenarios and test cases. Unlike other event based approaches, our approach is able to detect the proposed faults in a system. A prototype tool is developed to automate and evaluate the applicability of the entire process. Results have shown that the proposed approach and supportive tool is able to successfully derive test scenarios and test cases from the requirement specifications of safety critical systems, real time systems, and event based systems.

• The Journal of Korean Physical Therapy
• /
• v.1 no.1
• /
• pp.47-61
• /
• 1989

This paper presents the event approach to motor skill acquisition as a theoretical treatment of the learning and relearning of motor skill. 1) The use of norm-referenced developmental assesment tools and standardized qualitative assessment tool is an important component of infant movement evaluation. 2) The kinesthetic modality relaying movement and position imformation to the central nervous system is important for the detection and corretion of movement error. 3) The event approach treats the actor and the environment as inseparable in the acquisition of skills. 4) Motoy learning focuses almost entirely on how the skill is learned, contRolled and reTained. 5) Developmental assessment have needed an assessment of motor development. 6) A significant difference was found between articulation disorders children and motor coordination problem. 7) verbal ability is not essential for the learning of motor skills. 8) The Control of motor skills is a cognitive ability.