• 한국토양비료학회지
• /
• 제30권4호
• /
• pp.314-327
• /
• 1997

점적 관개시 근권에서의 토양 수분 이동 현상을 2차원 원통 좌표를 이용하여 모델링 하였다. 엽면 증산, 다양한 형태의 지면 증발, 관개율의 증가로 인한 지면에서의 물 고임 현상등을 고려하였다. 모델은 유한 차분법을 이용한 수치해로 풀었다. 여러가지 비교의 결과로부터 본 연구에서 개발된 모델은 근권에서의 토양 수분 이동 현상을 잘 묘사한다고 볼 수 있었다. 모델의 민감도 분석을 통해서 몇가지 유익한 사실을 발견하였다. 토양 수분이 연직 방향으로 이동하는 속도가 더 큰 것으로 보아 자동 관개용 토양 수분 측정 센서를 설치할 경우, 관개점의 연직하방이 좋은 측점임을 알 수 있었다. 습윤대의 형태가 단지(pot) 모양으로 되는 것은 지면 증발로 인한것임을 알 수 있었다. 또한, 토양의 포화 수리 전도도가 습윤대의 확산에 큰 영향을 주는 것을 알 수 있었고, 관개 중단 후에도 연직 방향의 확산은 계속됨을 알 수 있었다.

• 한국연초학회지
• /
• 제17권2호
• /
• pp.160-169
• /
• 1995

A mathematical model for the pyrolysis processes during unforced smoldering of cigarette was proposed in this study by analyzing the physical model of the smoldering cigarette (including the establishment of burning front between burning zone and pyrolysis zone, and analyzing the involvement of main factors such as pyrolysis of virgin tobacco, evaporation of water, and internal heat transport in the processes). Thermal conduction of cigarette paper and convective and radiative heat transfer at the outer surface were also considered via the thermal resistance law for the competitive heat transfer mechanisms. The governing partial differential equations were solved using an integral method. Model predictions of smoldering speed, or linear burn rate, as well as temperature and density profiles in the pyrolysis zone for different kinds of cigarettes were found to be close to the experimental data in the literature (Muramatsu, 1981). The model provides a relatively fast and efficient way to simulate the pyrolysis processes and offers a practical tool for exploring important parameters for a smoldering cigarette, such as blended tobacco composition, properties of cigarette paper, and heat flux from the burning zone to the pyrolysis zone.

• 전자공학회논문지A
• /
• 제30A권6호
• /
• pp.31-37
• /
• 1993

InSb thin films were fabricated by zone melting recrystallization of In/Sb multilayered thin films prepared by sequential evaporation. Unreacted metal phase or dispersed metal precipitates lowered the electron mobility and the electron mobility increased with development of (111) prefered orientation. Properties of the film could be controlled by changing mzximum temperature and scanning speed, and the electron mobility as high as 12, 000 cm $^2$/Vsec could be obtained under the optimized conditions.

• 한국해안해양공학회지
• /
• 제19권3호
• /
• pp.244-252
• /
• 2007

장기간에 걸친 증발량의 변화는 지표-대기간의 수문반응을 변화시키고, 농작물의 경작에도 영향을 미치며, 해안지방에서는 하천유입량 등의 변화로 생태계의 변화를 가져올 수 있다. 최근의 기후 상승에 따라 실제 증발량이 증가할 것으로 판단되나, 외국의 다양한 연구는 남반구와 북반구에 걸쳐 팬증발량이 감소하는 추세를 보여주었다. 이러한 현상은 기후 변화와 어느 정도 관련이 있을 가능성이 충분히 있으므로 외국의 연구 결과에 부응하여 우리나라에서도 팬증발량이 감소하는 추세를 보여 왔는가를 확인할 필요가 있다. 이 연구에서는 우리나라14개 지점에서의 1970년도부터 2000년도까지의 증발량 관측치를 선정하여 심도있게 분석하였으며, 우리나라 해안지역과 내륙지역의 팬증발량 변화를 비교하였다. 증발량 1차 추세선 분석 결과 14개의 지점 중 청주, 여수, 진주를 제외한 11개 지점이 감소하는 추세를 보여주었다. 14개 지점의 총 평균에서는 연간 1.6 mm/yr 감소하는추세를 보여주었으며, 이는 전체 자료의 기간인 30년 동안 연평균 팬증발량 약 50 mm의 감소한 것이다. 연평균증발산량의 값은 내륙지역에 비하여 해안지역에서 10% 가량 큰 값을 보이는 것으로 나타났으며, 증발산량의 연변화량은 내륙지방의 연간 -0.82 mm/yr에 비하여 해안지방에서 연간 -2.46 mm/yr으로 훨씬 빠르게 감소하는 경향을 보였다. Mann-Kendall trend test 결과는 95% 유의수준 내에서 4개 지점이 감소를 보여주며 10개 지점은 95% 유의수준 내에서 변하지 않는 것으로 나타났다. 그러나 전 지역에 대한 평균값은 감소추세를 보이는 것으로 나타났다. 이 결과는 외국의 기존 연구 결과와 일치하는 것으로 앞으로 우리나라 기후변화에 따른 다양한 연구에 기여할 것으로 기대한다.

• The Korean Journal of Ecology
• /
• 제20권2호
• /
• pp.133-143
• /
• 1997

From 1984 to 1989 reclaimed coastal lands in Choongnam Province of the western coast of Korea were studied for soil texture at three sites(Daeho, Hyundai A and Hyundai B) and for desalination one site(Hyundai B). The soil textures of varied sites in Hyundai A were horizontally similar and composed of 39-40% clay, 40-49% silt and 8-14% sand. But those in Da돼 and Hyundai B differed horizontally in the same area and vertically at the same site. Soil texures of Da돼 were composed of 15-17% clay, 30-45% silt and 40-55% sand and those of Hyundai B were composed of 22-45% clay, 26-49% silt and 17-31% sand. The measured electrical conductivity(EC), which represents whole salt content of the reclaimed soil, decreased year by year. The vertical distribution of the EC changed temporally and spatially in the upper zone above a 50 cm depth but not in The lower zone below a 50 cm depth. The EC valus of the soil were inversely proportional to the magnitued of annual precipitation, evaporation and the numbers of rainy days with r equalling -0.97. But the annual decrease of the EC was directly proportional to climatic factors with r=0.7. Salt in the reclaimed land was leached out by the percolative action of surplus rain water, or moved up by evaporation and carried away by running rain water. The running out of the salt on the soil surface was most efficiently carried out over 10 mm precipitation per day.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1130-1137
• /
• 1988

본 연구에서는 증발분출냉각장치의 설계 및 이의 응용을 위하여 두께가 비교 적 두꺼운(120mm) 다공물질층을 모델로 사용하여 증발분출냉각에 관한 열전달특성을 실험적으로 조사하였다. 실험은 열과 유체의 흐름이 1차원 정상상태에 대하여 증발 영역의 발생과 그 길이 및 상변화위치, 그리고 다공물질층의 표면온도등에 영향을 미 치는 인자들을 조사하며, 아울러 냉각수의 상변화시 다공층내 냉각수 유동의 안정성 여부를 관찰하였다.

• 한국에너지공학회:학술대회논문집
• /
• 한국태양에너지학회, 한국에너지공학회 1993년도 춘계 공동학술발표회 초록집
• /
• pp.70-78
• /
• 1993

Heat pipes, applied to flat plate solar collectors, have a long and slender configuration with relatively low heat flux on the evaporator. Such a heat pipe has a tendency to build-up a liquid pool at the lower half of evaporator zone, and at this pool occurs such complicated phenomena of evaporation and fluid dynamics as superheat, sudden generation of bubble, its likely explosive growth process and flooding etc. In the present study, we tried to solve those problems by means of adjusting the two principle design parameters, liquid fill charge and wick length, using 4 heat pipes and 3 thermosyphons, with different values of parameter respectively. The corresponding results can be summarized as followings, - The thermal conductance of heat pipes was largely improved by el eliminating wick from adiabatic and condenser zone. - But on evaporator zone wick is inevitable to reduce behavior of the build -up of liquid pool , where arise diverse internal complex phenomena. - The liquid fill charge should have to be increased by 10∼20％ more than the quantity to saturate the wick.

• 한국결정학회지
• /
• 제3권2호
• /
• pp.85-97
• /
• 1992

EBFZM( Electron Beam Floating Zone Melting) 법을 이용하여 몰리브덴에서의 금속계 불순물과 침입형 불순물의 정련기구 및 단결정 성장기구를 연구하 였다. Fe, Cr, Co등의 금속계 불순물은 몰리브덴과의 평형증기압의 차이에 따른 불순물의 선택적 증발에 의하여 우수한 정련효과를 나타내며, 몰리브덴보다 응점이 높은 Ta, W는 잘 제거되지 않았다. 한편 대역 정제에 의한 정련효과는 미약함을 확인하였다. EBF ZM은 C,0,N등의 침입형 불순물의 정련에도 효과적 이었다. 본 연구의 모든 조건에서 몰리브덴은 단결정으로 성장하였으며 2차 재결정 epitaxy에 의한 단결 정 성장기구가 제시되었다. 몰리브덴 단결정 내의 전 위밀도는 strain-anneal법에 의한 단결정의 경우보다 높았으며,본 실험의 열처리 조건에서는 변화하지 않았다. The purification and single crystal growth mechanisms of molybdenum were analysed in EBFZM ( electron beam floating zone melting). Metallic impurities of Fe, Cr, Co were purified efficiently but Ta and W were not removed well in this study. It was due to a preferential evaporation of the elements caused by the difference in equillibrium vapor pressure between the elements and molybdenum. The pu- rification effect by zone refining was not significant. The EBFZM also refined the interstitial impurities of C, 0 and N, effectively. The single crystals of molybdenum were grown regardless of the experimental conditions and the secondary recrystallization epitaxy was surge sled as a growth mechanism. The dislocation density in single crystal was higher than that by strain-anneal method, and was not reduced by heat treatments.

• Environmental Engineering Research
• /
• 제11권5호
• /
• pp.241-249
• /
• 2006

A mathematical model is described for the prediction of convective upward transport of an organic solvent driven by evaporation at the surface, which is known as the major transport mechanism in the in-situ photolysis of a soil contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin(TCDD). A finite-element model was proposed to incorporate the effects of multiphase flow on the distribution of each fluid, gravity as a driving force, and the use of hysteretic models for more accurate description of k-S-p relations. Extensive numerical calculations were performed to study fluid flow through three types of soils under different water table conditions. Predictions of relative permeability-saturation-pressure (k-S-p) relations and fluids distribution for an illustrative soil indicate that hysteresis effects may be quite substantial. This result emphasizes the need to use hysteretic models in performing flow simulations including reversals of flow paths. Results of additional calculations accounting for hysteresis on the one-dimensional unsaturated soil columns show that gravity affects significantly on the flow of each fluid during gravity drainage, solvent injection, and evaporation, especially for highly permeable soils. The rate and duration of solvent injection also have a profound influence on the fluid saturation profile and the amount of evaporated solvent. Key factors influencing water drainage and solvent evaporation in soils also include hydraulic conductivity and water table configuration.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권2호
• /
• pp.154-160
• /
• 2005

The result of combustion experiment by using the methanol-gasoline blended fuel showed that the supplying pressure appeared the maximum pressure between equivalent rate 1.1 and 1.2. and the evaporation of the fuel has been known to have been greatly influenced by surrounding temperature and the combustion chamber temperature after being injected from the injector And it is confirmed that the rate of evaporation had been suddenly dropped according to the temperature in the combustion chamber though the injected foe) had been fully evaporated Such tendency has visibly appeared when the zone is leaner. and we recognize that the rich fuel supply is needed in the operation of cold operating.