• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.155-168
• /
• 1998

In this paper, the structural properties of the existing reinforced concrete(RC) piers are surveyed and the major factors influencing the member strength and deformation capacity are identified. Also a seismic evaluation procedure of RC piers is presented. The factors controlling the member strength are the applied axial load, the reinforcement ratio and yield strength of longitudinal rebar for flexural strength, and the transverse reinforcement for shear strength. Member deformation capacity largely depends on transverse reinforcement ratio and anchor detail, and splice location of longitudinal reinforcement. The above structural detail should be investigated for the detail seismic evaluation of RC piers. The most of existing RC piers have inadequate transverse reinforcement anchor details and the splices of longitudinal reinforcement in the pier bottom where plastic hinges are formed after yielding. Therefore the deformation capacity is not enough for the ductile flexural behavior of the RC piers. The presented evaluation procedure can be used for the rational decisions as to seismic retrofitting of the existing RC piers.

• Korean journal of food and cookery science
• /
• v.12 no.3
• /
• pp.331-338
• /
• 1996

The main aim of this study was to develop carrot soups with fishery products, which is improved from traditional gruel of Cheju island. For this the optimal procedure and ingredient mixing ratio for making basic carrot soup was determined through the instrumental measurement, the sensory evaluation and the nutrient analysis, and then the carrot-fishery soups were prepared by mixing the fishery products from Cheju island. The results were as follows: The optimal procedure for making basic carrot soup was to saute the sliced carrots and soaked rices with the sesame oil for 5 min, add the water, bring to a boil for 6 min, simmer for 15 min, then puree the soup. The optimal ingredient mixing ratio in the basic carrot soup was carrot 300 g: rice 45 g: water 900 $m\ell$: sesame oil 15 $m\ell$: salt 5 g. For preparing carrot-fishery soups were the optimal fishery products mixing ratio i) 30% tile fish or crab, ii) prawn, abalone, top shell, or ear shell 20%, iii) sea urchin 15%, iv) fusiform or gulf weed 5％. The order of sensory evaluation scores, on a 5-point scale, were sea urchin, crab > top shell, tile fish > abalone, ear shell > prawn > coral fish > fusiform, gulf weed. Nutrient composition analysis showed that vitamin A was 5 times higher in carrot soup than in pumpkin soup. Sensory evaluation scores show that carrot soup was prepared to pumpkin soup. A portion (200 g) of the soup would provide 144% of the recommended daily allowance of vitamin A. The results of this work indicate that an acceptable carrot-fishery soups of better nutritional and sensory values than pumpkin soup can be prepared.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.213-217
• /
• 2012

The amount of spent fuel from nuclear power plants has been increasing. An effective management plan of the spent fuel becomes a critical issue, because the storage capacity of each plant will reach its storage limit in a few years. The volume of high toxic spent fuel can be reduced through a fuel processing. Advanced Fuel Cycle (AFC) system is considered to be one of the options to reduce the toxicity and volume of the spent fuel. It is necessary to set up a test facility to demonstrate the feasibility of the process at the engineering scale. The objective of the work is a development of the safety evaluation technology for the AFC system. The evaluation technology of the AFC structural integrity and processes were surveyed and reviewed. Key evaluation parameters for the main processes such as electrolytic reduction, electrorefining, and electrowinning were obtained. The survey results may be used for the establishment of the AFC regulatory licensing procedure. The establishment of the licensing criteria minimizes the trials and errors of the AFC facility design. Issues taken from the survey on the regulatory procedure and design safety features for the AFC facility provide a chance to resolve potential issues in advance.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.22-32
• /
• 2013

Generally, asset management procedure consists of exact information collection, decision of service level, analysis of aspiration level, analysis of financial condition and available budget, preparation of asset management plan, and value of modified asset. In this study, for the risk-based asset management, condition assessment and performance measuring, assessment of failure modes and risks, evaluation/selection of treatment options, and implementation of optimum solution are additionally included. For this, bridge inventory and performance measure considering risks are classified and method of quantitative/qualitative performance measure is suggested. Also, evaluation method of risk analysis for bridge asset management is suggested and basic research is carried out for applicable method of risk-based asset management. Using suggested risk procedure and method of risk-based bridge service level evaluation, it is possible to perform resonable asset management. Moreover, it is concluded that the proposed applicable method of risk-based asset management will provide a solution to contribute the development of systematical asset management for optimal decision making and prototype asset management system.

• Journal of Technology Innovation
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2001

Importance of technology evaluation cannot be overemphasized to support the effective investment policy. Most of the technology evaluation relies on either quantitative analysis for the value or qualitative comparison due to some attribute. When qualitative comparison is made, typically not only individual attribute. but also overall score is evaluated by the committee of experts. In this paper, we consider the qualitative evaluation procedure used in a venture incubating center and validate if the relationship between the average score of individual attribute and the overall score is significant. Additionally, we identify if the initially evaluated scores are good indicators for the realized future value of technology. Structural equation modeling approach is used and we expect that our approach can make important contributions on improving the currently used technology evaluation method.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.61-68
• /
• 2015

Method of remodeling builder selection for remodeling is competitive bidding. also metropolitan city, megalopolis city, city more than 50million have to do basic plan for remodeling before establishment of a housing cooperative. Purpose of basic plan is improvement of living conditions & the Quality of Life for resident. Technical Proposal Tendering in spite of being the a reasonable bidding system, institutional part, appraisal standard and the item part, consider procedure pard is performed in a similar way to the existing bidding system. so, technical proposal tendering is appropriate for future Method of builder selection of remodeling. therefore, the study purpose is a evaluation element of technical proposal tendering for apartment remodeling business The methods of study is understanding concept through review of precedent literature. Next, case investigation through Analysis of focal points. Lastly, evaluation element deduction of technical proposal tendering for apartment remodeling business through specialist conversation. As a result, Alteration of a right & move management is added to evaluation element's professional field. And detail item is alteration of a right & move management.

• Language and Information
• /
• v.4 no.2
• /
• pp.1-26
• /
• 2000

The purpose of this paper is to establish the standard method of evaluation English-to-Korean MT systems We focus on test suites, evaluation procedure and evaluation results. Four computer programs on the market are tested on a test suite consisting of 1,501 sentence, The quality of translation and the capacity of MT system are the key points for evaluation . The sentences in the suite are classified according to the grammatical properties they reveal. The classificatory scheme has the structure of a directory: each sentence belongs to a subclass, which belongs to a major class,. We place the sentences in the test suite on a scale of difficulty (hard ordinary easy) and each output sentence is graded on a scale of four accuracy levels. We also test the programs with respect to their speed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.198-203
• /
• 1998

This study, a sub-one of comprehensive research works titled under “Rural Resources Evaluation System”, tried to verify utility/applicability of the developed model system through the case study works on 3 sample villages, Backya, Uyan and Suyu, representing the lowland, upland and seashore villages respectively. From the various surveying and collecting works including the official/statistical data collection, map analysis, insitu investigation, field survey and written material review, the original data set were obtained and manipulated into final input data for resources grading. After then, by the automatized calculation procedure of “Rural Resources Evaluation System”, score results for resources evaluation were finally produced with the total maximum score being 1,000. Through comparing works among score results of 3 case villages and between score results and areal characteristics of each case village, the applicability of the system developed in this study was well confirmed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.140-141
• /
• 2017

This study is based on the evaluation of a single component injection type adhesive repair material and a new 2 component type used in leakage of underground concrete structures. The studies showed that based on different mix ratio of the 2 component type adhesive sealant comprised of an asphalt main and latex mixture agent the viscosity of the material compound differed significantly. Based on a permeability testing, injection and economic efficiency, and performance, the appropriate ratio was determined to be 6:1 and was proceeded to the KS F 4935 evaluation method. The 2 component type adhesive sealant uses a static mixer and a cartridge type container for the injection procedure and was able to satisfy the evaluation criteria outlined in the KS F 4935 standard.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.98-106
• /
• 2006

The substructure of temporary bridges used during the construction period of main bridges needs to be simple and strong at the same time so that it doesn't block running water. When the water flow is hindered by sub-structure of the bridges, as it happens when H beams with bracing are used, either the water floods or the bridge gets damaged. Therefore, using round beams for the substructure and connect them together is a preventive choice considering the intensive raining in the summer. The bridges using round beams for the substructure have also benefited by fast construction because of fewer bracing and in-situ welding. Because the round-pile-connecting method is relatively new, the safety evaluation of the constructed bridge is an essential procedure before being used in the field. The field evaluation of a bridge including the vehicle loading test and moving load analysis has been conducted and the results showed the safety requirement is satisfied.