• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.239-245
• /
• 2005

Through the fatigue test of plastic gears using polyacetal polymer, this research aims at providing basic data for not only specifying operation conditions of plastic gears, but also designing dimensions of plastic gears with giving fatigue life and the estimated equation of fatigue life of plastic gears. That is, from the fatigue life curves, the estimated equation of fatigue life of plastic gears is taken out. For the estimated equation of fatigue life of plastic gears, this research provides two test methods; one is preserving non-limited temperature of tooth flank, the other is preserving limited temperature of tooth flank. As results, how the temperature of tooth flank affects the fatigue life is shown. In addition, based on the endurance limit, the essential factors of the unit load and K-factor are determined, which are needed in the design of gear by bending strength and surface durability.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.405-409
• /
• 2012

In this paper, on-chip antennas applicable to ultra low power wireless transceiver are designed and evaluated. Using $0.18{\mu}m$ SiGe MMIC process, 4 types of antenna with $1{\times}1mm^2$ dimensions are fabricated. The on-wafer measurement in a microwave probe station is conducted to measure the input VSWR and antenna performance of the designed on-chip antenna. Performance evaluation results show that developed antennas can be easily integrated into one-chip RF transceiver for ubiquitous applications, including WPAN and human body communications.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.163-174
• /
• 1997

Development of control model and system for AMS (Automated Manufacturing Systems) has long been interested by researchers. Presented in the paper is a systematic approach to constructing a Petri-nets(PNs) model of AMS and method for design a graphical model of a AMS by using a new modeling tool which is called PNs. So, the procedure of modeling in the AMS is the same as current practice of AMS design and is based on the IOM (Integrated Object-oriented Modeling) paradigm. An AMS, which consists of various machine groups, can produce machine parts in different physical dimensions and lot size. To model such a system, the method which utilizes Sub-PNs are proposed. This enables the models according to part routings. The machine group which causes bottleneck is obtained and modified to relieve the problem. By iterating these steps which consist of modelling, simulation, and performance evaluation, an AMS can e obtained which satisfies the required manufacturing conditions. Finally, the implementation issues of PN modeling are addressed. The approach is the IOM from PN modeling by Sub-PNs and the other is a development of IOM tool for the performance evaluation of AMS.

• Transactions of Materials Processing
• /
• v.11 no.6
• /
• pp.503-512
• /
• 2002

The drawbead is used to control material flow into the die during the binder wrap process and the stamping process in the sheet metal forming process. Since the dimension of drawbead is relatively small in comparison with the typical dimensions, it is difficult to include drawbeads in finite element analysis of the sheet metal forming process. It is because the mesh system has to be fine enough to describe the drawbead and the computation time is drastically increased. In this paper, simulation of drawbead forming has been carried out to obtain the equivalent boundary conditions in the binder wrap process and the stamping process. In order to investigate the effect of various die geometries, parameter studies are performed with the variation of parameters such as the blank length, the drawbead depth, the drawbead radius, the inclination of die and the friction coefficient.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.87-95
• /
• 1998

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of welding defects. For this purpose, analysis objective in this study is fractal dimension and attractor Quadrant feature. Trajectory changes in the attractor indicated that even the same type of defects carried substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange. Such differences in characteristics of weld defects enables the evaluation of unique features of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hale) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor feature extraction in this study can enhance the precision rate of ultrasonic evalaution for defect signals of rail weld zone such as side hole and crack.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.840-845
• /
• 2008

To develop our original technology of concrete slab track, being widely accepted for new track, prefabricated concrete slab track, or precast concrete slab track has been developed. They have two different types according to slab shape and its dimensions, connection of slabs and connecting structure onto substructure. After the system design and successful performance evaluation in the laboratory, the trial installation on revenue line has been carried out. This paper is presenting the result of the trial installation and the performance tests in field. The performance tests have been performed as visual inspection for cracks and damages, measurement of track alignment and elastic behavior of track under passing trains. The performance test results during last 2 years have shown that no remarkable damages and settlements were found, and track alignment and elastic track behavior both exhibits good status.

• Journal of Korea Multimedia Society
• /
• v.21 no.11
• /
• pp.1271-1278
• /
• 2018

The NDT using ultrasonic is largely divided into A-Scan and C-Scan methods. Since A-Scan method is subject to subjective judgement by trained personnel, C-Scan method has been introduced, which presents the weld area in two dimensions by placing the transducers two dimensionally used in the A-Scan method. Therefore, it is necessary to develop equipment that can provide weld quality without the help of a welding expert and the presentation of effective C-Scan images. Thus, in this paper, the algorithms that express a low resolution 2-dimensional gray image formed by C-Scan method as a high-resolution color C-Scan image and automatically determine the weld quality from the generated C-Scan color image. The high resolution color C-Scan images proposed in this paper allow the exact shape of the weld point to be expressed, and an objective algorithm to use this image to automatically determine weld quality.

• Journal of Global Scholars of Marketing Science
• /
• v.16 no.1
• /
• pp.143-160
• /
• 2006

The objective of this paper is to examine the country of origin effect of products made in the Republic of Korea. The study focuses on the questions of the sources of information in evaluating products; the evaluation of specific product dimensions by Malaysian consumers; and consumers' assessment of different product categories. It reports on the findings of a survey conducted in which 244 responses were obtained. The most common product information source was found to be through advertisements in television and radio.. Products made in Korea had been rated highly for its product style. Consumer electronics were generally found to be the popular preference of product category by Malaysian consumers. The managerial implications of our study are discussed and the limitations of the study are also examined.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.15-20
• /
• 2011

This study was conducted to evaluate the characteristics of installation dimensions of speed control humps based on the theoretical dynamic analyses. The field surveys of speed control humps were performed first to compare their sizes with those suggested in the installation standard. Then, the displacement response spectra under impact loads were obtained using the single degree of freedom models where the vehicle and human were assumed to combine completely. The analysis results showed that the human perception became larger as the width and height of the humps increased, but the extremely higher uncomfortableness should be avoided. In addition, the ratio between the width and height should be considered when the humps are designed and installed because the ratio governs the vertical acceleration magnitude.

• Smart Structures and Systems
• /
• v.20 no.4
• /
• pp.473-481
• /
• 2017

This study suggests a simple, convenient and non-destructive method for investigation of the Young's modulus detection in stepped shafts which only utilizes the first-order resonant frequency in flexural mode and dimensions of structures. The method is based on the impulse excitation technique (IET) to pick up the fundamental resonant frequencies. The standard Young's modulus detection formulas for rectangular and circular cross-sections are well investigated in literatures. However, the Young's modulus of stepped shafts can not be directly detected using the formula for a beam with rectangular or circular cross-section. A response surface method (RSM) is introduced to design numerical simulation experiments to build up experimental formula to detect Young's modulus of stepped shafts. The numerical simulation performed by finite element method (FEM) to obtain enough simulation data for RSM analysis. After analysis and calculation, the relationship of flexural resonant frequencies, dimensions of stepped shafts and Young's modulus is obtained. Numerical simulations and experimental investigations show that the IET method can be used to investigate Young's modulus in stepped shafts, and the FEM simulation and RSM based IET formula proposed in this paper is applicable to calculate the Young's modulus in stepped shaft. The method can be further developed to detect mechanical parameters of more complicated structures using the combination of FEM simulation and RSM.