• 한국응용곤충학회지
• /
• 제39권3호
• /
• pp.199-205
• /
• 2000

곤충병원선충(Steinernema carpocapsae Weiser)의 지상부 해충에 대한 야외 방제 효과검증을 위해 화학 방제가 곤란한 파밤나방(Spodoptera exigua(Hubner))을 대상으로 엽면 살포시 시험을 실시하였다. 지상부 살포시 건조에 따른 선충의 생존력 감소를 막기 위해 바람직한 내건제들이(Alkyl glucoside, CMC, glycerol, Keltrol-F, Kunipia-G 및 Laponite LXG) 우선 비교 분석되었다. 이들 내건제 가운데 Keltrol-F(0.1%)가 선발되었다. 이 농도의 내건제가 포함된 선충을 밀도별로 파밤나방이 서식하는 포크에 엽면 살포 처리하여 1 ml당 5,000마리의 감염태 선충의 유효 방제 밀도를 결정하였다. 이 선충 밀도로 포장에 적용하였을 때 87.8%dml 파밤나방 방제 효과를 보였다.

• 공업화학
• /
• 제7권2호
• /
• pp.215-220
• /
• 1996

1-(2-hydroxyethyl)-2-undecyl-2-imidazoline로부터 유도된 9종의 양쪽성 계면활성제에 대한 표면장력과 등전점을 일정농도의 수용액에서 비교 검토하였고, 표면장력법에 의하여 cmc를 추정하였다. 카르복시화 아미드류의 표면장력은 $4.0{\times}10^{-4}{\sim}1.0{\times}10^{-3}mol/{\ell}$ 농도범위에서 26~40dyne/cm, 술폰화 또는 황산화 이미다졸린류는 $1.5{\times}10^{-3}{\sim}2.5{\times}10^{-3}mol/{\ell}$ 농도범위에서 30~35dyne/cm, 술폰화 아미드류는 $5.8{\times}10^{-4}{\sim}8.0{\times}10^{-4}mol/{\ell}$ 농도범위에서 25~33dyne/cm이었다. 또한 등전점의 pH 범위는 카르복시화 아미드류는 pH 7.2~7.9, 술폰화 또는 황산화 이미다졸린류와 술폰화 아미드류는 pH 4.5~5.5이었다.

• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.77-81
• /
• 1998

Surface active properties of these aqueous Gemini surfactant solutions including surface tension, critical micelle concentration(cmc), foaming power, foam stability, emulsifying power and Krafft point were measured at given conditions. They showed excellent properties, being compared with conventional single-chain surfactants such as sodium dodecyl sulfonate(SDS). Their surface tensions in the aqueous solutions were decreased to $30{\sim}38$ mN/m, which is lower than 39 mN/m of SDS, and their cmc values evaluated by surface tension method were $2.8{\times}10^{-5}{\sim}3.3{\times}10^{-4}$ mol/L. These values were also much lower than that of SDS, $9.8{\times}10^{-3}$ mol/L. The foaming power and foam stability, especially decyl and dodecyl compounds, were good and the emulsifying power in benzene or soybean oil was also excellent. All of the synthesized Gemini surfactants possessed good water solubility and their Krafft points were all below $0^{\circ}C$. As results, DDED and DDOD, Gemini surfactants which were synthesized are expected to be applied as foamers, emulsifiers and so on.

• Journal of Nutrition and Health
• /
• 제31권4호
• /
• pp.809-822
• /
• 1998

Retarding effects of the dietary fibers from persimmon peels (PTDF ; total dietary fibers, PIDF ; insoluble dietary fibers, PSDF ; soluble dietary fibers) and dried jujubes (JTDF ; total dietary fibers, JIDF ; insoluble dietary fibers, JSDF ; soluble dietary fibers) on glucose, bile acid and cadmium transport were evaluated by in vitro dialysis sack method. These effects were compared with those of commerical citrus pectin, CM-cellulose (CMC) and $\alpha$-cellulose. Yields of PTDF, PIDF and PSDF on wet weight basis were 14.04% , 11.61%, 1.76%, respectively, and those from dried jujubes were 14.80%, 9.98% and 2.80%, respectively. The amount of soluble fibers in JTDF was higher than PTDF. Soluble fibers had the retarding effects on glucose transport but insoluble fibers did not have. CM-cellulose showed the greatest retarding effect, which was followed by citrus pectin and JSDF. Among the soluble fibers, PSDF had the lowest retardig effect. Retarding effect of TDF was dependent upon the amount of SDF in TDF. Regarding bile acid dialysis , insoluble dietary fibers as well as soluble dietary fibers showed the retarding effects, among which JSDF had the greatest retarding effects, among which JSDF had the greatest retarding effect, followed by citrus pectin. Among the extracted fibers, dietary fibers from dried jujubes were more effective than these from persimmon peels, and SDF seemed to show higher retarding effects than IDF and TDF. On cadmium transport retardation , all dietary fibers except $\alpha$-cellulose had the retarding effects and PSDF showed the greatest effect which was followed by PIDF and CMC, The extracted fibers showed higher retarding effect on Cd transport than glucose and bile acid transport, and dietary fibers from persimmon peels showed higher retarding effects than those from dried jujubes.

• 컴퓨터교육학회논문지
• /
• 제8권4호
• /
• pp.57-69
• /
• 2005

본 연구는 인터넷을 활용하여 프로젝트 학습을 할 수 있는 모형을 개발하고 실업계 고등학교의 수업에서 적용한 사례를 상황적으로 평가한 내용을 다루고 있다. 컴퓨터 수업에서 적용할 수 있는 프로젝트 학습 모델을 개발하고 실제 실업계 고등학교에 이 모델을 적용한 결과를 평가하는 것이 본 연구의 목적이다. 학생들이 수입에서 멀티미디어 작업을 하는 과정에서 산출되는 포트폴리오를 교사가 쉽게 평가할 수 있도록 프로젝트 BBS 시스템을 별도로 개발하였다. 실제 수업은 실업계 고등학교 3학년 그래픽산업디자인과 80명(매년 40명)을 대상으로 2년에 걸쳐 진행되었다. 이 기간 동안 광고사진 교과수업에서 팀별로 광고 사진 기획, 촬영, 편집 등에 관련된 프로젝트별 협동학습이 구체적으로 어떻게 드러나고 있는지 메시지 분석, 수업 관찰, 면담 및 실습결과물을 통하여 상황적으로 평가한 결과를 제시하였다.

• 한국의류산업학회지
• /
• 제15권5호
• /
• pp.825-833
• /
• 2013

In this study, the dyeing properties of Phellodendron amurense on cotton and silk fabrics were evaluated to establish a scientific database of dyeing methods using natural dyes with the ultimate aim of facilitating the practical use of these dyes. The optimal thickener and dyeing concentrations depending on the thickener type were identified when dyeing with P. amurense, and the fabric color, color fastness, and antibiosis were examined for various thickeners, fabrics, and mordants. The results were as follows.: The optimal concentrations of thickeners when dyeing on cotton and silk fabrics were CMC 3% (w/w), Mayprogum 7% (w/w), and Indalka 9% (w/w). The optimal concentration of P. amurense was 25% (w/w), irrespective of the type of thickener. To maintain the hue unique to P. amurense, thickening with Mayprogum or Indalka and mordanting with Al was effective for cotton, while thickening with Mayprogum or Indalka and mordanting with Al or thickening with CMC and mordanting with gallnut was effective for silk. The dry-cleaning fastness and abrasion resistance of cotton fabrics dyed with P. amurense were excellent at the 4-5 level. Gallnut was effective for washing fastness and perspiration fastness against color degradation, and FFC was effective for light fastness. The washing fastness, dry-cleaning fastness, abrasion resistance, and perspiration fastness of silk fabrics dyed with P. amurense were excellent at level 4, except for washing and perspiration fastness, and FFC was effective for the improvement of light fastness. Dyeing cotton and silk fabrics with P. amurense thus yielded antibiosis and excellent washing fastness.

• 한국식품과학회지
• /
• 제30권6호
• /
• pp.1394-1398
• /
• 1998

L. bulgaricus LBS 47과 S. serevisiae SCS 5를 접종하여 전통안동식혜를 발효 후 저장하는 동안에 안정제에 의한 침전억제 효과는 Na-Alginate가 가장 우수하였다. 침전 안정제를 넣어서 관능 검사를 한 결과 균질화 하지 않은 식혜의 경우는 Na-alginate는 0.1에서 0.15% 처리했을 때 Carrageenan은 0.05% 첨가했을 때 가장 맛이 우수하였으며 식품 안정제의 종류 및 첨가 농도간의 상호 효과는 침전 안정제의 종류간에는 통계적 유의성이 없으나 첨가 농도간에는 유의성이 있었다. 식혜의 현탁안정성을 증진시킬 목적으로 안정제를 첨가하여 숙성시켰을 때 CMC, Na-alginate은 2일째 carrageenan은 비균질화 식혜는 2일에서 4일째 균질화한 식혜는 1일째 최고의 점도를 나타내었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권4호
• /
• pp.26-32
• /
• 2005

계면활성제는 소수성 물질(톨루엔)의 물질전달율을 증가시켜 미생물이 있는 액상으로 잘 녹아들어가게 함으로써 미생물에 의한 분해를 증가시킨다. 본 연구에서는 여러 종류의 계면활성제가 존재할 때 톨루엔의 물질전달율과 미생물에 의한 분해가 어떻게 이루어지는지에 대해 알아보았다. 사용한 계면활성제는 다음과 같다: Sodium Oodecyl Sulfate (SOS), TritonX-100, Tween 80, BYK-345 (silicone 계면활성제). 실험결과에 따르면 BYK-345는 critical micelle concentration (CMC)에서 톨루엔의 용해도를 증가시켰다. 하지만, SDS와 TritonX-100는 CMC에서 톨루엔의 용해도를 증가시키지 못했다. 증류수에 계면활성제를 첨가하면 증류수만 있는 경우보다 톨루엔의 물질전달율$(K_La)$이 증가했다. 톨루엔 분해 미생물을 이용한 회분식 실험에서 SOS는 톨루엔의 분해를 감소시켰다. 그 이유는 SDS가 미생물에 독성을 미쳤기 때문일 수도 있고, 기질로서 이용되어서 톨루엔과 경쟁관계에 놓였기 때문일 수도 있다. BYK-345를 계면활성제로 사용한 실험에서도 톨루엔의 분해가 감소했는데 이것은 BYK-345가 미생물의 활성도에 심각한 영향을 미쳤기 때문이다. 하지만, TritonX-100 와 Tween 80의 경우에는 톨루엔의 분해가 크게 감소하지 않았다. 낮은 농도의 TritonX-100의 경우에 오히려 톨루엔의 분해는 증가했다. 이와 같은 결과들을 통해 톨루엔의 생물학적 분해를 위해 가장 적절한 계면활성제는 TritonX-100임을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.115-122
• /
• 2008

The hydrosilylation is an addition reaction of Si-H bond to unsaturated double bonds, which provides a convenient mechanism to synthesize poly(dimethylsiloxane-co-methylsiloxane)copolymer having siloxy units in polymer backbone. In this study, Poly(dimethylsiloxane-co-methylsiloxane) copolymer was synthesized through the polymerization reaction of cyclopentasiloxane with poly(methyl-hydrogen) siloxane. Silicone-hydrogen functional group of the poly(dimethylsiloxane-co-methylsiloxane) copolymer was substituted to the alkyl groups by hydrosilylation. And their structure was analyzed with FT-IR, H-NMR and GPC instruments, respectively. Surface tension of the synthetic compounds is increased from 22dyne/cm to 25dyne/cm according to increase additional EO moles. The cmc which was evaluated by surface tension was ranged $10^{-5}$ to $10^{-4}mol/L$ and it was decreased according to increase of dimethyl siloxyl content. HLB number of these surfactants was evaluated 9.5 to 11.5 range. These silicone surfactants is applied to self-emulsifier defoamer and personal care products as surface tension depressant, emulsifier, foam control agent.

• Corrosion Science and Technology
• /
• 제20권2호
• /
• pp.85-93
• /
• 2021

The corrosion damage of materials in marine environment mainly occurs by Cl^- ions due to the breakdown of passive films. Additionally, various characteristics in seawater such as salinity, temperature, immersion time, flow rate, and biological activity also affect corrosion characteristics. In this study, the corrosion characteristics of stainless steels (STS 304 and STS 316L) and anodized aluminum alloys (AA 3003 and AA 6063) were evaluated with seawater temperature parameters. A potentiodynamic polarization experiment was conducted in a potential range of -0.25 V to 2.0 V at open circuit potential (OCP). Corrosion current density and corrosion potential were obtained through the Tafel extrapolation method to analyze changes in corrosion rate due to temperature. Corrosion behavior was evaluated by measuring weight loss before/after the experiment and also observing surface morphology through a scanning electronic microscope (SEM) and 3D microscopy. Weight loss, maximum damage depth and pitting damage increased as seawater temperature increased, and furthermore, the tendency of higher corrosion current density with an increase of temperature attributed to an increase in corrosion rate. There was lower pitting damage and lower corrosion current density for anodized aluminum alloys than for stainless steels as the temperature increased.