• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.359-362
• /
• 2002

In this paper, we propose a structure of 800bps high speed router and a gigabit Ethernet line interface board. Having Programmability, network processor is applied to gjgabit Ethernet line interface board. Also, we propose a new method to upgrade image files that consist of operating system and drivers. It is possible to upgrade image files for several boards at once and to reduce the elapsed time for image upgrade using tile proposed method.

• Information and Communications Magazine
• /
• v.31 no.8
• /
• pp.66-73
• /
• 2014

자동차와 IT기술 간의 융합을 통해, 대용량의 데이터 교환을 수반하는 인포테인먼트 및 다양한 지능형 안전/주행 기능들이 구현되고 있다. 이런 기능들이 원활하게 운영되기 위해서는 고속의 네트워크가 필수적이다. 본 논문에서는 기존의 인포테인먼트용 자동차 네트워크 기술들과 항공용 Ethernet 기술의 특징을 고찰한다. 그리고 이를 바탕으로 Ethernet 기반의 미래 자동차 백본 네트워크를 설계하고 제안한다.

• Review of KIISC
• /
• v.3 no.4
• /
• pp.89-97
• /
• 1993

LAN을 이용한 정보 교환이 증가함에 따라 LAN을 이용한 정보교환 시에도 중요한 정보의 보호를 위한 보안체제가 필요하다. 이 보안 서비스를 위한 암호화 알고리즘을 LAN상에 적용할 때 그 알고리즘이 LAN 의 성능에 미치는 영향을 고려한 후 실제 LAN 상에 적용하는 것이 바람직하다. 따라서 본 논문에서는 다양한 암호 알고리즘 중 대표적인 단일키 암호 시스템인 DES 알고리즘을 오늘날 전세계적으로 가장 많이 사용되어지고 있는 LAN 인 Ethernet에 적용시 현재 표준화가 진행중에 있는 IEEE 802.10 SILS 에서 제안한 SDE 프로토콜을 사용하여 보안 서비스의 제공 정도가 Ethernet상의 정보 전달속도에 미치는 영향을시뮬레이션을 통하여 성능 분석하여 살펴 보았다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.321-326
• /
• 2005

근거리 통신망 LAN(Local Area Network)는 일반적으로 회사, 학교, PC방에서 널리 사용하는 통신 방식으로 Serial, USB 통신방식과 더불어 반드시 습득해야 할 프로토콜 중의 하나로서 앞으로는 이러한 LAN 통신방식을 이용하여 모든 가전기기, 회사 내의 보안장치 등이 모두 유무선 복합적으로 연결되어 휴대폰 또는 PDA로 상태변화를 실시간으로 확인이 가능한 시대가 올 것이다. 본 논문에서는 LAN LSI인 W3100A를 분석해 보고, MCU(Atmega128)과 Phycei ver인 RTL8201과 Interface하여 회로를 구성한 다음, TCP Client 역할을 위한 MCU Programming을 하여 .NET으로 Server 프로그램을 만들어 Server에 데이터를 전송한다. 이와 같이 MCU(Atmega128)을 사용하여 들어온 데이터를 Ethernet Network상으로 데이터의 전송을 가능하게 하는 Ethernet 통신 시스템을 연구하였다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.799-802
• /
• 1998

As we know, gigabit ethernet is a new technology to be substituted for current fast ethernet used widely in local area network. The switch used in gigabit ethernet should deal with frames in giga-bps. To do such a fast switching, we need that serveral processes meet the budgets, such as MAC address table lookup, several giga speed path setup, fast scheduling, and etc. Especially MAC address table lookup has to be processed in the same speed with speed of incoming packets, thus the bottleneck in the process can cause packet loss by the overflow in the input buffer. We devise new practical hardware hashing method to perform fast table lookup by minimizing the number of external memory access and accelerating with hardware.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.2
• /
• pp.99-103
• /
• 2007

In this paper, one type of a security system for panel working is suggested. The industrial Ethernet is used for open-close door control of the working panel and for monitoring the working panel is correct or not. Especially to upgrade the security system, a remote approval function of panel working by using the given approval number, a remote monitoring function for checking the approved panel is currently working or not, and an alarming function for keying the unapproved number or opening the disapproved panel, are added for preventing and reducing the intentional working error. Also the worker and working time are stored in PC automatically in exel file for detecting the working error. To show the possibility of suggested security system. two-working panel system is prepared and studied.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.331-334
• /
• 2005

This paper suggests the Ethernet aggregation to XGMII framing procedure (EAXFP) mechanism to economically combine the traffic adaptation technology with the link aggregation method in designing 10 Gigabit Ethernet (10 GbE) interfaces. This design sidesteps the data-loss issues that can result from designing an interface with only one link. The most critical issue in relation to the link aggregation interface is the algorithm used to control frame distribution between the ten ports. The proposed EAXFP mechanism offers an efficient link aggregation method as well as an efficient frame distribution algorithm, which maximize the throughout of the 10 GbE interface. In the experiment and analysis of the proposed mechanism, it was also discovered that the 10 GbE interface that uses the proposed EAXFP mechanism significantly reduced the packet loss rate. When there will be heavy traffic loads come about in the future, the proposed EAXFP mechanism assures an efficient and economical transmission performance on the router system.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.3
• /
• pp.379-385
• /
• 2007

Recently, vital devices of the railway signaling systems have been computerized in order to ensure safe train operation. Due to this computerization, we have gradually come to need networking interfaces between these devices. Thus it is important that there be reliable communication links in the signaling systems. Network technologies are applied in the real-time industrial control system, and there are numerous studies to be carried out on the computer network technology for vital control systems such as railway signaling systems. For deploying the studies, we consider costs, reliability, safety assurance technique, compatibility, and etc. In this paper, we propose the Ethernet for railway signaling systems and also precisely describe the computer network characteristics of vital railway signaling systems. Then we demonstrate the experimental results of the proposed network algorithm, which is based on switched Ethernet technology with redundancy scheme.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.94-98
• /
• 2011

Electrolytic power capacitors today form essential components for virtually any power electronic system such as DC/DC converter or UPS. Frequently, electrolytic capacitors for DC link voltage smoothing are the key components which determine the life cycle of the whole unit and often are responsible for converter breakdown failures. In this paper, ethernet-based remote diagnosis system for DC voltage smoothing capacitor using DSP control board is developed. To estimate the status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The ESR detection scheme is based on the determination of the capacitor ripple power losses calculated from DC link voltage/current measurement. Experimental results show the veridity and reliability of the proposed ethernet-based remote on-line capacitor diagnosis system.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.570-572
• /
• 2000

In this paper, we present the configuration of Direct Load Control System using TCP/Ethernet Module for the Load Management Europe and America has operated the DLC system by many communication system, and Taiwan, Japan has controlled the cooling load at peak hours of power system. Up to now, Many Researches for the DLC of communication method, so called, pager, power line carrier, ripple control, etc. has advanced. Now, we present new communication method for the DLC using TCP/Ethernet module which is widespread all over the world.