• 한국해양공학회지
• /
• 제34권6호
• /
• pp.419-427
• /
• 2020

In this study, a particle image velocimetry (PIV)-based pressure estimation method was investigated, with application to the wave-in-deck loading phenomenon. An experimental study was performed in a two-dimensional wave tank using a fixed deck structure under a focused wave, obtaining local pressures by pressure sensors, global loads by load cells, and instantaneous velocity fields using the PIV measurement technique. The PIV-based pressure estimation method was applied using the Euler equation as the governing equation, and the proper time step for the wave impact pressure was studied using the normalized root-mean-square deviation. The pressure estimation method showed good agreement for the local impact pressure in comparison with the measured pressure by the pressure sensors. However, some differences were observed in the peak pressure due to the limitations of the Euler equation and the sampling rate of the measurement system. Using the estimation method, the pressure fields during wave-in-deck loading were determined in the study, with an analysis of the mechanism of impact and negative pressure occurrence.

• 한국측량학회지
• /
• 제38권6호
• /
• pp.543-551
• /
• 2020

본 논문에서는 레이더를 이용한 표적 길이 추정 정확도를 향상시키기 위한 방법에 관해 소개한다. 레이더 수신신호를 통해 만들어지는 고해상도 거리측면도(HRRP: High Resolution Range Profile)은 표적의 1차원적인 산란 특성을 나타내며, HRRP에서의 피크(peak)는 전자기파를 강하게 산란시키는 산란점(scattering center)을 의미한다. 추출된 산란점을 이용하여 레이더 가시선 방향(RLOS: Radar Line of Sight)의 길이인 표적 종방향 거리(downrange) 길이를 추정하며, 표적과 레이더 가시선 방향이 이루는 각도를 통해 표적의 실제 길이를 추정한다. 길이 추정의 정확도를 향상시키기 위해, HRRP를 이용하는 방법보다 정확하게 산란점을 추출하기 위한 방법인 매개변수 추정방법(parametric estimation method)을 이용할 수 있다. 매개변수 추정방법은 산란점 개수가 결정된 후에 적용되며, 따라서 산란점 개수 추정의 정확도에 크게 영향을 받는다. 본 논문에서는 레이더를 통한 표적 길이 추정 정확도를 향상시키기 위해, 정보 이론적 판단 기준에 바탕을 둔 신호원 수 추정방법인 AIC (Akaike Information Criteria), MDL (Minimum Descriptive Length), GLE (Gerschgorin Likelihood Estimators)방법들을 이용하여 산란점 개수를 추정하였다. 매개변수 추정방법으로 ESPRIT기법을 이용하여, 간단한 표적 캐드 모델에 대한 길이 추정 시뮬레이션을 수행하였으며, GLE방법이 산란점 개수 추정과 표적 길이 추정에 우수한 성능을 보임을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.2879-2890
• /
• 2020

In this paper, we study the estimation of angle, range and polarization parameters of a bistatic polarization sensitive frequency diverse array multiple-input multiple-output (PSFDA-MIMO) radar system. The application of polarization sensitive array in receiver is explored. A signal model of bistatic PSFDA-MIMO radar system is established. In order to utilize the multi-dimensional structure of array signals, the matched filtering radar data can be represented by a third-order tensor model. A joint estimation of the direction-of-departure (DOD), direction-of-arrival (DOA), range and polarization parameters based on parallel factor (PARAFAC) algorithm is proposed. The proposed algorithm does not need to search spectral peaks and singular value decomposition, and can obtain automatic pairing estimation. The method was compared with the existing methods, and the results show that the performance of the method is better. Therefore, the accuracy of the parameter estimation is further improved.

• Communications for Statistical Applications and Methods
• /
• 제30권4호
• /
• pp.411-421
• /
• 2023

This paper provides a new estimation equation based on the concept of a minimum distance between the empirical and theoretical distribution functions under the most widely used progressive Type-II censoring scheme. For illustrative purposes, simulated and real datasets from a three-parameter Weibull distribution are analyzed. For comparison, the most popular estimation methods, the maximum likelihood and maximum product of spacings estimation methods, are developed together. In the analysis of simulated datasets, the excellence of the provided estimation method is demonstrated through the degree of the estimation failure of the likelihood-based method, and its validity is demonstrated through the mean squared errors and biases of the estimators obtained from the provided estimation equation. In the analysis of the real dataset, two types of goodness-of-fit tests are performed on whether the observed dataset has the three-parameter Weibull distribution under the progressive Type-II censoring scheme, through which the performance of the new estimation equation provided is examined.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.757-771
• /
• 2013

We present a semi-rigid connection estimation method by using cross modal strain energy method. While rigid or pinned assumptions are adopted for steel frames in traditional modeling via finite element method, the actual behavior of the connections is usually neither. Semi-rigid joints enable connections to be modeled as partially restrained, which improves the quality of the model. To identify the connection stiffness and update the FE model, a newly-developed cross modal strain energy (CMSE) method is extended to incorporate the connection stiffness estimation. Meanwhile, the relations between the correction coefficients for the CMSE method are derived, which enables less modal information to be used in the estimation procedure. To illustrate the capability of the proposed parameter estimation algorithm, a four-story frame structure is demonstrated in the numerical studies. Several cases, including Semi-rigid joint(s) on single connection and on multi-connections, without and with measurement noise, are investigated. Numerical results indicate that an excellent updating is achievable and the connection stiffness can be estimated by CMSE method.

• 한국ITS학회 논문지
• /
• 제4권1호
• /
• pp.57-62
• /
• 2005

본 논문에서는 OFDM 시스템에서 임펄스 신호를 이용한 채널 추정방법을 제안한다. 채널 응답을 추정하기 위해 주파수 영역에서 새로운 프리엠블을 사용하여 시간영역에서 16샘플 간격으로 4개의 구간으로 나누고, 각 구간에서 임펄스 응답이 나오도록 한다. 이 임펄스 신호들은 한 OFDM 심볼동안에 전송한다. 수신단에서, 각 구간별 임펄스 신호를 더하여 평균을 취한다. 평균된 임펄스 응답에서 최대지연 이후 데이터는 잡음이기 때문에 zero padding을 하여 제거하고 FFT를 수행하여 채널 추정 응답을 찾아낸다. 제안된 채널 추정방법을 이용한 WLAN 시스템의 BER성능은 IEEE802.11a에서 사용하는 긴 훈련신호(long preamble)를 이용한 기존의 채널 추정 방법에 비해 약 3dB 성능 향상을 보인다.

• 한국음향학회지
• /
• 제19권6호
• /
• pp.53-61
• /
• 2000

잡음환경에서의 음성인식 성능향상을 위해서는 서로 다른 잡음환경으로 인한 mismatch를 줄이는 것이 중요하다. 이를 위해 계산이 간단하고 잡음환경에서 비교적 우수한 성능을 내고 있는 스펙트럼 차감법이 널리 사용되고 있다. 본 논문에서는 스펙트럼 차감법을 적용하기 위한 잡음 스펙트럼 추정방법으로 히스토그램 처리방법을 도입한다. 히스토그램 처리방법은 음성이 아닌 구간의 검출이 필요없으며 시간에 따라 변화하는 시변잡음에도 적용 가능한 장점이 있다. 그러나 히스토그램 처리방법으로 신뢰도 높은 잡음 스펙트럼의 평균값을 추정하더라도 스펙트럼 차감법을 적용했을 때의 잔여 잡음의 문제가 발생한다. 이를 해결하기 위하여 잡음추정 과정에 사용되었던 히스토그램의 분포특성을 고려한 새로운 over-estimation 적용방식을 제안한다. 제안된 방식은 측정된 잡음의 분포에 따라 적응적으로 over-estimation의 정도를 결정함으로써 SNR 변화에 따른 영향이 적은 장점이 있다. 자동차 소음 환경에서의 화자독립 고립단어 인식실험 결과, 기존의 over-estimation factor를 적용한 경우보다 제안된 방식의 인식성능이 개선되었다.

• 전력전자학회논문지
• /
• 제24권6호
• /
• pp.445-451
• /
• 2019

An input power estimation method of a three-phase inverter for the high-efficiency operation of AC motors is proposed. Measuring devices, such as DC link voltage and input current sensors, are required to obtain the input power of the inverter. In the proposed method, the input power of the inverter can be estimated without the input current sensor by using the phase current information of the AC motor and the switching pattern of the inverter. The proposed method is more robust to parameter error than conventional method. The validity of the input power estimation method is verified through experiments conducted on a 1 kW permanent-magnet synchronous motor drive system.

• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.65-70
• /
• 1984

A recursive parameter estimation method is applied to spindle deflection model during boring process. The spindle infeed rate is then determined to preserve the diametral tolerance of bore. This estimation method is further extended to adaptive control by application of the variance perturbation method. The results of computer simulation attest that the proposed method renders the optimal cutting conditions, maintaining the diametral accuracy of bore, regardless of parameter fluctuations. The proposed method necessitating only post-process measurements features that initialization of parameter guess values in simple, a priori knowledge on parameter variations is not needed and the accurate estimation of optimal spindle infeed rate is obtained, even if the parameter estimation may be poor.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.99-102
• /
• 2003

A new interacting multiple model (IMM) method using genetic algorithm (GA)-based intelligent input estimation(IIE) is proposed to track a maneuvering target. In the proposed method, the acceleration level for each sub-model is determined by IIE-the estimation of the unknown acceleration input by a fuzzy system using the relation between maneuvering filter residual and non-maneuvering one. The GA is utilized to optimize a fuzzy system fur a sub-model within a fixed range of acceleration input. Then, multiple models are composed of these fuzzy systems, which are optimized for different ranges of acceleration input. In computer simulation for an incoming ballistic missile, the tracking performance of the proposed method is compared with those of the input estimation(IE) technique and the adaptive interacting multiple model (AIMM) method.