• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.107-118
• /
• 2010

Wireless communication technologies including vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) enable the development of more sophisticated and effective traffic information systems. This study presents a method to estimate vehicular travel times in a vehicular ad hoc network (VANET) environment. A novel feature of the proposed method is estimating individual vehicle travel times through advanced on-board units in each vehicle, referred to as self-estimated travel time in this study. The method uses travel information including vehicle position and speed at each given time step transmitted through the V2V and V2I communications. Vehicle trajectory data obtained from the VISSIM simulator is used for evaluating the accuracy of estimated travel times. Relevant technical issues for successful field implementation are also discussed.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.57-62
• /
• 2014

PURPOSES : Capacity is a main factor of determining the number of lane in highway design or the level of service in road on operation. Previous studies showed that breakdown may occur before capacity is reached, and then it was concluded that capacity is a stochastic value rather than a deterministic one. In general, estimating capacity is based on average over maximum traffic volume observed for capacity state. This method includes the empirical distribution method(EDM) and would underestimate capacity. This study estimated existing empirical methods of estimating stochastic highway capacity. Among the studied methods are the product limit method(PLM) and the selected method(SM). METHODS : Speed and volume data were collected at three freeway bottleneck sites in Cheonan-Nonsan and West Sea Freeway. The data were grouped into a free-flow state or capacity state with speeds observed in the bottlenecks and the upstream. The data were applied to the empirical methods. RESULTS : The results show that the PLM and SM estimated capacity higher than EDM. The reason is that while the EDM is based on capacity observations only, the PLM and SM are based on free-flow high volumes and capacity observations. CONCLUSIONS : The PLM and SM using both free-flow and capacity observations would be improved to enhance the reliability of the capacity estimation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.497-504
• /
• 2010

In this paper, the author presents a reliability estimation technique to analyze the effects of traffic loads on pavement mean life based on the national highway database of Suwon and Uijeongbu region from 1999 to 2008. The estimation of the mean life, its standard deviation and reliability for pavement sections are calculated by using an appropriate distribution, Lognormal distribution, based on reliability theory. Furthermore, the probability paper method and Maximum likelihood estimation are both used to estimate parameters. The author found that mean life of newly constructed sections and over-layed sections is about 6.5 to 7.9 years and 7.3 to 9.1 years, respectively. The author also ascertained that the results of cumulative failure probability for pavement life between the proposed methods and observed data are similar. Such an assessment methodology and measures based on reliability theory can provide useful information for maintenance plans in pavement management systems as long as additional life data on pavement sections are accumulated.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.135-146
• /
• 2005

Up to now studies on the fusion of travel time from various detectors have been conducted based on the variance raito of the intermittent data mainly collected by GPS or probe vehicles. The fusion model based on the variance ratio of intermittent data is not suitable for the license plate recognition AVIs which can deal with vast amount of data. This study was carried out to develop the fusion model based on travel time acquired from the license plate recognition AVIs and the point detectors. In order to fuse travel time acquired from the point detectors and the license plate recognition AVIs, the optimized fusion model and the proportional fusion model were developed in this study. As a result of verification, the optimized fusion model showed the superior estimation performance. The optimized fusion model is the dynamic fusion ratio estimation model on real time base, which calculates fusion weights based on real time historic data and applies them to the current time period. The results of this study are expected to be used effectively for National Highway Traffic Management System to provide traffic information in the future. However, there should be further studies on the Proper distance for the establishment of the AVIs and the license plate matching rate according to the lanes for AVIs to be established.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.297-303
• /
• 2000

Damage estimation of a bridge structure is presented using ambient vibration data caused by the traffic loadings. The procedure consists of identification of the modal properties and assessment of the damage locations and severities. An experimental study is carried out on the bridge model subjected to vehicle loadings. Vertical accelerations of the bridge deck are measured at a limited number of locations. The modal parameters are identified from the free vibration signals extracted using the random decrement method. Then, the damage assessment is carried out based on the estimated modal parameters using the neural networks technique. The identified damage locations and severities agree reasonably well with the inflicted damages on the structure.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.31-55
• /
• 1986

Generally, the development of shipping is characterized by the amount of traffic flow (traffic volume) and seaborne cargo in the sea. Movement of ships is an essential element of constructing the traffic flow which is represented the dynamic movement of ships in the sea, but on the other band the numbers of arriving and departing the port is the basic factor consisting of the static movement of ships. The amount of cargoes by coastal vessels and ocean trade vessels have increased tremendously with the great growth of the Korean economy these days. This increase of the seaborne cargoes has made the Korean coastal traffic flow so congested that this can be a cause of large pollution as well as great marine casualities such as a loss of human lives and properties . And also the future coastal traffic is expected to increase considerably according to our economic development and high dependence upon foreign trade. Under the circumstance, to devise the safety of coastal traffic flow and to take a proper step of a efficient navigation, there is a necessity for analyzing and surveying the coastal traffic trend and the characteristics of cargo movement. In order to grasp the dynamic movement of ships in the Korean coast, O/D analysis is executed. This paper aims to secure the basic data necessary for a comprehensive plan and estimation of vessel traffic management system for the enhancement of safety, order and efficiency of vessel traffic in the Korean coast. The analyzed results of the traffic flow and seaborne cargoes of the Korean coast are summarized as follows : 1) The congestion by the vessels occurred around the ports such as-in proportion of ship's number (proportion of tonnage) -Incheon 18.5%(14.8%), Pohang 5.9% (9.9%), Samil 5.2%(8.3%), Mokpo 8.6%(0.8%), Pusan 13.5%(36.4%), Ulsan 9.1%(16.2%). 2) It is found that the area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed thatthe area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed that the coastal vessels are main elements constituting the coastal traffic and that there are much traffic flow among five ports as following through the precise O/D analysis of ship's coastal movement. Incheon-Samil, Ulsan, Pusan, Jeju Pusan -Samil, Ulsan, Incheon, Jeju Pohang -Samil, Inchoen, Jeju Pohang -Samil, Incheon, Jeju Ulsan -Samil, Incheon, Jeju Samil -Ulsan, Pusan, Incheon 4) The amount of cargoes to abroad are in proportion about 81% of total and the amount of coastal cargoes are about 19%. Of those, cargoes in and out to Japan are about 26% and to South-east Asia are about 27%. 5) The chief items of foreign cargoes are oil(38.33%), iron ore(13.98%), bituminoous coal(12.74%), grain(8.02%), lumber(6.45%) in the import cargoes and steel material(21.96%), cement(17.16%), oil(6.81%), fertilizer(3.80%) in the export cargoes. 6) The 80.5% of total export cargoes and 92.4% of total import cargoes are flowed in five main ports. 7) The chief items of coastal cargoes are oil (42.45%), cement(16.86%), steel material (6.49%), anthracite(6.31%), mineral product(4.3%), grain, and fertilizer. Almost 92.24% of total import and export oil cargoes in Korea is loaded and unloaded at the port of Samil & Ulsan.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.43-62
• /
• 2004

Conventionally the estimation method of the origin-destination Matrix has been developed by implementing the expansion of sampled data obtained from roadside interview and household travel survey. In the survey process, the bigger the sample size is, the higher the level of limitation, due to taking time for an error test for a cost and a time. Estimating the O-D matrix from observed traffic count data has been applied as methods of over-coming this limitation, and a gradient model is known as one of the most popular techniques. However, in case of the gradient model, although it may be capable of minimizing the error between the observed and estimated traffic volumes, a prior O-D matrix structure cannot maintained exactly. That is to say, unwanted changes may be occurred. For this reason, this study adopts a conjugate gradient algorithm to take into account two factors: estimation of the O-D matrix from the conjugate gradient algorithm while reflecting the prior O-D matrix structure maintained. This development of the O-D matrix estimation model is to minimize the error between observed and estimated traffic volumes. This study validates the model using the simple network, and then applies it to a large scale network. There are several findings through the tests. First, as the consequence of consistency, it is apparent that the upper level of this model plays a key role by the internal relationship with lower level. Secondly, as the respect of estimation precision, the estimation error is lied within the tolerance interval. Furthermore, the structure of the estimated O-D matrix has not changed too much, and even still has conserved some attributes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.150-156
• /
• 2004

Though the concept of Life-Cycle Cost (LCC) itself is not new, its effectiveness for planning, design, rehabilitation and maintenance/management of civil infrastructures is becoming increasingly recognized. For the decision problems as in the case of the LCC of plant facilities, equipments, bridge decks, pavements, etc., the Life-Cycle Cost Analysis (LCCA) is relatively simple, and thus its practical implementation is rather straightforward. However, when it comes to major infrastructures such as bridge, tunnels, underground facilities, etc., the LCCA problem becomes extremely complex because lack of cost data associated with various direct and indirect losses, and the absence of uncertainty data available for the assessment as well. As a result, the LCC studies have been largely limited only to those relatively simple LCCA problems of planning or conceptual design for making decisions. Accordingly, in the recent years, the researchers have pursued extensive studies on the LCC effectiveness mostly related to LCC models and frameworks for civil infrastructures. Moreover, recently the demand on the practical application of LCC effective decisions in design and maintenance is rapidly growing unprecedently in civil engineering practice. Indirction cost is very important on LCC formulation. But that is very difficult and complicate the estimation every LCC. The objective of this paper is to suggest efficient regression model for the estimation of indirect cost approach to the practical application of LCC for the design and rehabilitation of civil. infrastructures considering traffic, traffic network, detour condition, and workzone condition. In this paper, it performed the sensitivity analysis and correlation analysis of parameter for development of regression model of inflection cost.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.33-43
• /
• 2006

This research is to the selection of optimal probability distribution as well as the estimation for design hourly factor in consideration of traffic characteristic, such as road function, lane number and AADT. To accomplish the objectives, we are applied to various probability distribution using traffic data that observed at permanent traffic count points in 2005. The parameters or the selected 14 probability distribution were estimated based on the method of maximum likelihood and the validity condition of the estimated parameter The goodness-of-fit test, such as chi-square test. was performed as well as the estimation of design hourly factor. As a result, An appropriate distributions of each case were selected : Pearson V for two lane of rural roads, LogLogistic for the four lane of rural roads, LogLogistic for the urban roads, Extreme value for recreation roads. And optimal K factor are as following : $0.1{\sim}0.2 $ for two lane of rural roads, $0.09{\sim}0.14$ for the four lane of rural roads. $0.07{\sim}0.13$ for the urban roads, $0.1{\sim}0.2$ for recreation roads.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.17-27
• /
• 2011

This paper investigates some critical errors influencing travel demand estimation in Korea Transportation Data Base (KTDB), and through this investigation reasonable traffic analysis zone (TAZ) size and internal trips ratio are analyzed. With varying zone size, the accuracy of travel demand estimation is studied and appropriate level of zone size in KTDB is also presented. For this purpose zonal structure consisting of location of zone centroid, number of centroid connecters has been constructed by social economic index, and then some descriptive statistical analyses such as F-test, coefficient of correlation are performed. From the results, this paper shows that the optimum levels of zone system were various according to the order and capacity of roads, and also shows that the smaller TAZ, the less error in this research. In conclusion, in order to improve accuracy of traffic demand estimation it is necessary to make zone size smaller.