• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.2
• /
• pp.97-102
• /
• 2003

In this paper, a recurrent artificial neural network (RNN) based self-tuning speed controller is proposed for the high-performance drives of induction motors. The RNN provides a nonlinear modeling of a motor drive system and could provide the controller with information regarding the load variation system noise, and parameter variation of the induction motor through the on-line estimated weights of the corresponding RNN. Thus, the proposed self-tuning controller can change the gains of the controller according to system conditions. The gain is composed with the weights of the RNN. For the on-line estimation of the RNN weights, an extended Kalman filter (EKF) algorithm is used. A self-tuning controller is designed that is adequate for the speed control of the induction motor The availability of the proposed controller is verified through MATLAB simulations and is compared with the conventional PI controller.

• Journal of Pharmaceutical Investigation
• /
• v.5 no.4
• /
• pp.7-16
• /
• 1975

The drug release property from the coated tablets which contain 291mg of acetylsalicylic acid were estimated from comparison of the blood level and the urinary excretions after oral ingestion of coated tablets and noncoated tablet in human. The coating materials are 2-methyl-5-vinylpyridine-methylacrylic acid copolymer(MPM), dimethyl aminoethyl methacrylate methyl methacrylate copolymer(EE), polyvinyl acetal diethyl aminoacetate(AEA), and shellac. Each of 7 subjects ingested 873mg of acetylsaliylic acid. All tablets are coated approximately $3.5{\pm}0.5%(w/w)$ per tablet with each of the coating materials and met K.P.II. standard for potency and disintegration time. The availability was decreased in the following order:MPM coated tablets>EE coated tablets>AEA coated tablets>> shellac coated tablets.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.729-738
• /
• 2004

Seasonal variation of major inorganic ions in the greater Seoul area was estimated using a photochemical box model and a gas/aerosol equilibrium model with emphasis on semi -volatile nitrate. Pollutant emission was determined by season by comparing the predicted concentration with the measurement one obtained for a year from the late 1996. The results showed that particulate nitrate was the highest in summer but about 40% of total nitrate was present in the gas phase. This was due to volatilization at high temperature since ammonia was sufficient to neutralize all nitrate regardless of season. As relative humidity in summer was higher than the deliquescence point, particulate ion concentration with water was two times higher than that in other season. So called ‘NOx disbenefit’ indicating increase in particulate ion concentration with decrease in NOx emission was evident especially in winter.

• Journal of Satellite, Information and Communications
• /
• v.3 no.2
• /
• pp.7-12
• /
• 2008

The study discussed the link analysis for the Ka band satellite broadcasting service in Korea with respect to the transmission schemes based on the DVB-S2 standard. To analyze the effect of the rain fading to the link budget, we estimated the rain attenuation from the measured rainfall intensity in Korea. We analyzed the link budget for the Ka band transponders of Koreasat-3, and DirecTV BSS-99W, and showed the possible link availability with the DVB-S2 transmission schemes for each transponder. Based on the link analysis of the available satellites with the Ka band transponders, we suggested the required EIRP for the satellite which will be employed for the Ka band satellite broadcasting service in Korea.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.104-111
• /
• 2001

This study presents an analysis method for heat flow and deformation of sheet metal laser welding. A heat source model for 2-dimensional heat flow analysis of laser welding process was suggested in this paper. To investigate the availability of the heat source model, the analysis results were compared and estimated with the results of previous researches. We could get a good agreement between the results of numerical analysis and experiments in the temperature distribution of weldment. Due to the characteristics of welding process, some kinds of deformations are usually generated in a welded structure. Generally, the degree of deformation is dependent on the welding sequence constraints as well as input power Therefore, in this paper we evaluate the deformation of gas pressure vessel according to the welding sequence and input power. In the analysis of weld deformation, 2-dimensional thermo-elasto-plastic analysis was performed for the gas pressure vessel by using a commercial FE program package.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.499-505
• /
• 1998

This paper presents the method for an estimation of discharge current waveshapes in short gap discharge by a radiated electromagnetic field. The method of currentwaveform estimation described is using the one antenna method(single field method) with a measured electric or magnetic fields at given field point by a time domain antenna. In order to verify the availability of the estimated theory, the discharge current waveshape estimation was performed by one antenna method using the measured electric fields of Wilson & Ma and compared with experiments.

• Speech Sciences
• /
• v.11 no.4
• /
• pp.43-52
• /
• 2004

Model parameters in HMM based speech recognition systems are normally estimated using Maximum Likelihood Estimation(MLE). The MLE method is based mainly on the principle of statistical data fitting in terms of increasing the HMM likelihood. The optimality of this training criterion is conditioned on the availability of infinite amount of training data and the correct choice of model. However, in practice, neither of these conditions is satisfied. In this paper, we propose a training algorithm, MCE(Minimum Classification Error), to improve the performance of a speech recognizer detecting mispronunciation of a foreign language. During the conventional MLE(Maximum Likelihood Estimation) training, the model parameters are adjusted to increase the likelihood of the word strings corresponding to the training utterances without taking account of the probability of other possible word strings. In contrast to MLE, the MCE training scheme takes account of possible competing word hypotheses and tries to reduce the probability of incorrect hypotheses. The discriminant training method using MCE shows better recognition results than the MLE method does.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.2
• /
• pp.151-162
• /
• 2014

This study proposes an optimization model to plan the patient distribution and medical resource allocation considering the diverse characteristics of disaster. For reflecting the particularity of disaster response, we configured a few scenarios such as availability of emergency surgery of non-major medical staff and the change in number of patients estimated reflecting the uncertainty, urgency and convergence of disaster. And we finally tested the effects of the scenarios' combination on the objective function defined as maximum number of survival patients. Our experimental results are expected to highlight the significance of the proposed model as well as the applicability of scenarios under disaster response.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.195-198
• /
• 2006

One of the major sources of error in precise GPS positioning since the turn-off the Selective Availability(SA) is the ionospheric propagation delay. For the last decades, a lot of the ionospheric researches based on a GPS network have been implemented throughout the world. Especially researches of the ionospheric modeling for Wide Area Argumentation System(WAAS) have been undertaken and published. In mid-latitude regions, typical spatial and temporal variations in ionospheric models delay tend to minimal. The developed ionospheric model calls for a 1.25 degree grid at latitudes and a 2.5 degree grid at longitudes. The precise grid TEC estimated by the inversion technique is also compared with global ionosphere maps(GIMs) which have been provided by several analysis centers(ACs). The results of initial investigations into the suitability of the proposed ionospheric modeling scheme in north-east Asia are presented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.199-202
• /
• 2006

One of the major sources of error in precise GPS positioning since the turn-off the Selective Availability(SA) is the ionospheric propagation delay. For the last decades, a lot of the ionospheric researches based on a GPS network have been implemented throughout the world. Especially researches of the ionospheric modeling for Wide Area Argumentation System(WAAS) have been undertaken and published. In mid-latitude regions, typical spatial and temporal variations in ionospheric models delay tend to minimal. The developed ionospheric model calls for a 1.25 degree grid at latitudes and a 2.5 degree grid at longitudes. The precise grid TEC estimated by the inversion technique is also compared with global ionosphere maps(GIMs) which have been provided by several analysis centers(ACs). The results of initial investigations into the suitability of the proposed ionospheric modeling scheme in north-east Asia are presented.