• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.191-200
• /
• 2004

Zinc (Zn) is an essential element in biological process, however inadequate Zn status in general population have been recognized. To update the knowledge for Zn-cadmium (Cd) interaction, we studied the intestinal uptake and transport, and the expression of metal transporter proteins (divalent metal transporter 1, DMT1 ; metal transporter protein 1, MTP1 ; zinc transporter 1, ZnTl ; metallothionein 1 , MT1) in duodenum after Cd exposure using Zn deficient animal model. Rats were led Zn deficient (ZnD, 0.5-1.0 mgZn/kg) or Zn supplemented (ZnS, 50mg Zn/kg) diet for 4 weeks, and followed single administration of $^{109}$ CdCl$_2$orally. The body Zn flatus and tissue Cd concentration were determined at 24 hrs after Cd administration. Total body burden of Cd and Cd absorption index (AI, %) were estimated based on the tissue Cd analyzed. DMT1, MTP1, ZnTl and MT1 mRNA were analyzed by using RT-PCR method. Feeding of Zn deficient diet for 4 weeks produced a reduced body weight gain and a depletion of body Zn. Tissue Cd concentration, body burden of Cd and Cd absorption index were higher in the ZnD diet fed rats than the ZnS diet red rats. Especially, Cd concentration in the small intestine (duodenum, jejunum and ileum) and the colon of FeD diet fed rats were higher markedly than in the FeS diet group. The expression levels of DMT1, MTP1 and ZnT1 mRNA in FeD diet fed rats were similar to the FeS diet. The level of MT1 mRNA expression was significantly lower in the FeD than the FeS diet fed rats. Taken together, theses results indicate that Zn deficiency in diet induce an increased intestinal absorption and tissue retention of Cd, and down -regulate the MT1 expression in the intestine which might be play a part of role in Cd absorption and transport in mammalian. These findings suggest that deficiency of essential metal could be enhanced the toxicity of toxic, non-esstial metals through the metal-metal interaction.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.5
• /
• pp.459-473
• /
• 2014

The recent mass appearances of jellyfish in Korea have caused economic and social damage, as they plague swimmers and fishermen. However, jellyfish have high economic and nutritional value, and contain low levels of calories and hydrolysates. Thus, jellyfish are a natural, healthy food that can improve high blood pressure, bronchitis, and a multitude of other diseases. Here, we present research on the ecology, classification, bloom, damage caused, food component characterization, and tissues of jellyfish, with the aim of facilitating further study. Research on use of jellyfish as salted products, and for collagen and qniumucin would also be valuable. A jellyfish body is classified into three parts: the body, termed the umbrella; the oral arm; and the tentacle. Jellyfish are planktonic marine members of a group of invertebrate animals comprising the classes Schypozoa (phylum Cnidaria) and Cuboza. In Korea in 2012, jellyfish damage resulted in decreases of annual catch and commercial value estimated at 177 and 141 billion won, respectively. Because concentrations of heavy metals are below the safety limits for seafood, dried jellyfish appear to be safe raw materials for food. The proximate compositions of Nemopilema nomurai and Aurelia aurita were 97.1% and 96.5% moisture, 0.9% and 1.2% crude proteins, undetected and 0.1% crude lipids, and 1.7% and 1.8% ash, respectively. According to their total contents of essential, total, and non-essential amino acids, jellyfish gonads were deemed good-quality protein. Because the major functional components of jellyfish are collagen and qniumucin, jellyfish can be used salted, or these components of healthy diets can be extracted from them. For more effective use of jellyfish, unit costs should be decreased and safety guaranteed. Additionally, dehydrators attached to conveyor belts should be developed. Since jellyfish can be used throughout the year, they should be listed in the Korean Food Standards Codex as a food source.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.644-650
• /
• 2016

In soil-to-plant transfer of heavy metals, the amount absorbed and accumulated varies depending on the environment conditions. The absorption rate of cadmium (Cd) in plants differs considerably depending on the bioavailability of Cd in the soil, while usage by various organic matters is also reported to affect absorption patterns. Therefore, this study aimed to identify the difference in the transfer of essential metal ions and Cd to various plant parts when rice straw compost was used to cultivate soybean (Glycine max L. cv. Daepung). In the two-leaf stage of soybean cultivated in a greenhouse, Cd was mixed in the soil, after which the Cd and essential metal ions contents, and physiological changes of soybean seedlings were studied on the 15th and 25th day. The Cd toxicity in the plant was reduced with the use of rice straw compost. Further, the Cd content varied with the plant part, and was higher in young leaves (3rd and 4th leaf) than in the stem. When analyzed by leaf age, the Cd transfer was highest in young leaves (3rd and 4th leaf), followed by mature leaves (1st and 2nd leaf). While there was no significant difference between plant tissues in the absorption rate of copper (Cu) and zinc (Zn) when rice straw compost was used against Cd toxicity, the absorption rate of manganese (Mn) and iron (Fe) showed a significant decline in both the control and rice straw compost treatment conditions, as well as a significant difference between leaf ages. Therefore, these results confirm that the use of rice straw compost against Cd toxicity is effective, and implies that the rate of Cd transfer in the soybean plant varies significantly with leaf age.

• Journal of Animal Environmental Science
• /
• v.8 no.2
• /
• pp.87-98
• /
• 2002

This study was conducted to determine nutritional values of different sources of food residues(FR) released in autumn and to compare them with nutrient requirements on NRC standard feeding system of swine. Hospital or cafeteria FR contained more cooked rice and side dishes residues and less vegetable residues and fruit peel, resulting in higher energy and lower fiber contents, compared to apartment complex FR, which had opposite patterns to these results. Chemical composition between hospital and cafeteria FR was almost similar. Salt(NaCl) content was more than 9 folds of NRC swine requirement, but much lower than the maximum tolerant level. Essenial and non-essential amino acids profile was similar among FR sources. Hospital or cafeteria FR protein had a similar pepsin digestibility to soybean meal protein. Apartment complex FR protein, however, had a much lower pepsin digestibility. When NRC nutrient requirements are considered, FR in swine diets could satisfy requirements of protein and all the essential amino acids, 75${\sim}$111% of digestible or metabolizable energy, and most of the major and minor minerals. All the FR contained extremely low levels of toxic heavy metals, indicating that they are completely safe from these toxic substances. It was concluded that hospital or cafeteria FR could be a nutritionally excellent and balanced feed source for swine.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.157-157
• /
• 2017

Titanium and its alloys that have a good biocompatibility, corrosion resistance, and mechanical properties such as hardness and wear resistance are widely used in dental and orthopedic implant applications. They can directly connect to bone. However, they do not form a chemical bond with bone tissue. Plasma electrolytic oxidation (PEO) that combines the high voltage spark and electrochemical oxidation is a novel method to form ceramic coatings on light metals such as titanium and its alloys. This is an excellent reproducibility and economical, because the size and shape control of the nano-structure is relatively easy. Silicon (Si), manganese (Mn), and magnesium (Mg) has a useful to bone. Particularly, Si has been found to be essential for normal bone, cartilage growth and development. Manganese influences regulation of bone remodeling because its low content in body is connected with the rise of the concentration of calcium, phosphates and phosphatase out of cells. Insufficience of Mn in human body is probably contributing cause of osteoporosis. Pre-studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The objective of this work was to study nucleation and growth of bone-like apatite formation on Ti-6Al-4V in solution containing Mn, Mg, and Si ions after plasma electrolytic oxidation. Anodized alloys was prepared at 270V~300V voltages. And bone-like apatite formation was carried out in SBF solution for 1, 3, 5, and 7 days. The morphologies of PEO-treated Ti-6Al-4V alloy in containing Mn, Mg, and Si ions were examined by FE-SEM, EDS, and XRD.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.80-80
• /
• 2017

Titanium and its alloys that have a good biocompatibility, corrosion resistance, and mechanical properties such as hardness and wear resistance are widely used in dental and orthopedic implant applications. However, they do not form a chemical bond with bone tissue. Plasma electrolytic oxidation (PEO) that combines the high voltage spark and electro-chemical oxidation is a novel method to form ceramic coatings on light metals such as tita-nium and its alloys. This is an excellent re-producibility and economical, because the size and shape control of the nano-structure is relatively easy. Silicon (Si), manganese (Mn), and magne-sium (Mg) have a useful to bone. Particularly, Si has been found to be essential for normal bone, cartilage growth, and development. Mn influences regulation of bone remodeling be-cause its low content in body is connected with the rise of the concentration of calcium, phosphates and phosphatase out of cells. Pre-studies have shown that Mg plays very im-portant roles in essential for normal growth and metabolism of skeletal tissue in verte-brates and can be detected as minor constitu-ents in teeth and bone. In this study, Electrochemical behavior of plasma electrolytic oxidized films formed in solution containing Mn, Mg and Si ions were researched using various experimental in-struments. A series of Si-Mn-Mg coatings are produced on Ti dental implant using PEO, with the substitution degree, respectively, at 5 and 10%. The potentiodynamic polarization and AC impedance tests for corrosion behav-iors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV. Also, AC impedance was performed at frequencies anging from 10MHz to 100kHz for corrosion resistance.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.465-470
• /
• 2020

Complex materials are widely used in aviation industries where lightweighting is essential because they have lighter properties than metals. However, composite materials can cause defects such as internal void formation, poor adhesive mixing, and non-adhesive parts during the production process, and there is a risk of micro-cracking and interlayer separation due to low energy impact. Therefore, a structural damage test is essential. As a result, structural integrity monitoring using FBG is drawing attention. Compared to conventional electrical sensors, FBG has the advantage of being more corrosion-resistant and multiplexed without being affected by electrical noise. However, interloggers measuring FBG are expensive and have a large disadvantage because they are made on the premise of measuring large structures. In this paper, low-cost interloggers were designed for use in unmanned or small aircraft using optical switche, WDM filter, and LTFs, and compared to conventional high-priced interrogator.

• Journal of the Korean Society of Groundwater Environment
• /
• v.1 no.1
• /
• pp.23-32
• /
• 1994

To determine the apparent equilibrium constants, K$_{ad,app}$, for the adsorption reactions of trace metals on amorphous iron oxyhydroxide (AIO) in the Taebag coal mine area, time-adsorption and pH-adsorption experiments were performed for a selected bottom sediment mainly comprised of AIO from the study area. The results from the adsorption experiments indicate that most of the trace metals, except Pb, achieve equilibrium states with AIO and thus, the calculated K$_{ad,app}$ may represent the true apparent equilibrium constants. K$_{ad,app}$ and the stoichiometric coefficients of proton, x, of the adsorption reactions between the trace metals and AIO were respectively calculated from the intercepts and slopes of the regression lines of log($\Gamma$/ ［M］$_{aq}$)against pH provided by pH-adsorption experiments. The calculated K$_{ad,app}$ this study has the values of the range from 10$^{－4.5}$ to 10$^{2.75}$ , which is much different from the reported values by other investigators for simple experimental systems. K$_{ad,app}$ of this study is more or less close but not exactly pertinent to the estimated values for the other natural systems. It indicates that K$_{ad,app}$ for the adsorption reactions in the aquatic system in the study area is unique and thus should be determined befor the adsorption modelling. The calculated x of this study has the values of the range from -0.3 to 0.7, which is also much different from what most geochemists generally accept. The discrepancy in x may be due to the competition among different kinds of ionic species on the adsorption site or simulataneous occurrence of different kinds of adsorption reactions. The results from this study should help construct an appropriate adsorption model for the aquatic systems polluted by the coal mine drainage in the Taebag area. With the constructed model, one can describe the concentration variations of trace metals due to the adsorption in the system, which is an essential part of the investigation on the water quality affected by coal mine drainage in the Taebag coal field.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.204-212
• /
• 1990

The SMC composite, now being considered in certain structural applications, is anticipated to experience repeated loading during service. Thus, understanding of the fatigue behavior is essential in proper use of the composite material. In this paper, using the SMC composite composed of E-glass chopped strand and unsaturated polyester resin three point bending fatigue tests are carried out to investigate the fatigue crack propagating behavior under various cyclic stresses and fatigue damage of various microcrack forms. The following results are obtained from this study; 1) Most of the total fatigue life of the SMC composite is consumed at the initial extension or the growth of the macroscopic crack. 2) A Paris' type power-law relationship between the crack propagation rate and stress intensity factor range is obtained, and the value of material constant m is much higher (m=9~11)than that of other metals. 3) In case of high cyclic stress the fatigue damage show high microcrack density and short crack length, but in case of low cyclic stress does it vice versa. 4) Fatigue damage is characterized by microcrack density, crack length and distribution of crack orientation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.533-538
• /
• 2011

A plastic-compatible low-temperature metal deposition and patterning process is essential for the fabrication of flexible electronics because they are usually built on a heat-sensitive flexible substrate, for example plastic, fabric, paper, or metal foil. There is considerable interest in solution-processible metal nanoparticle ink deposition and patterning by selective laser sintering. It provides flexible electronics fabrication without the use of conventional photolithography or vacuum deposition techniques. We summarize our recent progress on the selective laser sintering of metals and metal oxide nanoparticles on a polymer substrate to realize flexible electronics such as flexible displays and flexible solar cells. Future research directions are also discussed.