• Korean Journal of Remote Sensing
• /
• v.40 no.2
• /
• pp.203-217
• /
• 2024

The Land Use, Land-Use Change and Forestry (LULUCF) sector of the National Greenhouse Gas Inventory is crucial for obtaining data on carbon sinks, necessitating accurate estimations. This study analyzes cases of countries applying the LULUCF sector at the Tier 3 level to propose enhanced methodologies for carbon sink estimation. In nations like Japan and Western Europe, satellite spatial information such as SPOT, Landsat, and Light Detection and Ranging (LiDAR)is used alongside national statistical data to estimate LULUCF. However, in Korea, the lack of land use change data and the absence of integrated management by category, measurement is predominantly conducted at the Tier 1 level, except for certain forest areas. In this study, Space-borne LiDAR Global Ecosystem Dynamics Investigation (GEDI) was used to calculate forest canopy heights based on Relative Height 100 (RH100) in the cities of Icheon, Gwangju, and Yeoju in Gyeonggi Province, Korea. These canopy heights were compared with the 1:5,000 scale forest maps used for the National Inventory Report in Korea. The GEDI data showed a maximum canopy height of 29.44 meters (m) in Gwangju, contrasting with the forest type maps that reported heights up to 34 m in Gwangju and parts of Icheon, and a minimum of 2 m in Icheon. Additionally, this study utilized Ordinary Least Squares(OLS)regression analysis to compare GEDI RH100 data with forest stand heights at the eup-myeon-dong level using ArcGIS, revealing Standard Deviations (SDs)ranging from -1.4 to 2.5, indicating significant regional variability. Areas where forest stand heights were higher than GEDI measurements showed greater variability, whereas locations with lower tree heights from forest type maps demonstrated lower SDs. The discrepancies between GEDI and actual measurements suggest the potential for improving height estimations through the application of high-resolution remote sensing techniques. To enhance future assessments of forest biomass and carbon storage at the Tier 3 level, high-resolution, reliable data are essential. These findings underscore the urgent need for integrating high-resolution, spatially explicit LiDAR data to enhance the accuracy of carbon sink calculations in Korea.

• Journal of Integrative Natural Science
• /
• v.9 no.2
• /
• pp.113-120
• /
• 2016

Monopolar spindle 1 (Mps1) is an attractive cancer target due to its high expression levels in a wide range of cancer cells. Mps1 is a dual specificity kinase. It plays an essential role in mitosis. The high expression od Mps1 was observed in various grades of breast cancers. In the current study, we have developed a CoMFA model of pyridazine derivatives as Mps1 kinase inhibitors. The developed CoMFA model ($q^2=0.797$; ONC=6; $r^2=0.992$) exhibited a good predictive ability. The model was then validated by Leave out five, progressive sampling and bootstrapping and found to be robust. The analysis of the CoMFA contour maps depicted favorable and unfavorable regions to enhance the activity. Bulky positive substitution at $R^3$ position and Negative substitution in $R^1$ position is favored could increase the activity. In contrast, bulky substitution in $R^1$ position is not favored. Our results can be used in designing a potent Mps1 (TTK) inhibitor.

• Journal of architectural history
• /
• v.13 no.1 s.37
• /
• pp.7-19
• /
• 2004

This study is to analyze the building layout of traditional government office building in Chungchong province with Chungchong-do regional maps and Eupjis(邑誌) being compiled in the late Chosun dynasty. The building layout of government office in Chungchong-do is followed in the wake of the spatial structure, Sam-Jo(三朝, three reign) and Oejeon-Naejeon(外殿-內殿), of Chosun dynasty palace. The planning principle of Sam-Jo at government office, Dongheon(東軒) territory for rule administration corresponds to Chijo(治朝) with a local governor who is the ruler, as for the Naea(內衙) territory which a family of him and he lives in, it is corresponded to Yeonjo(燕朝), and in the job space of Ajeon(衙前), it is corresponded to Oejo(外朝). As for the application of the inside and outside principle of provincial government office, Dongheon is corresponded to Oejeon and Naea to Naejeon. A compositive and an approach axis of government office in Chungchong-do is correspond with Dongheon in the center, and these axes form an central axis and an entry space of government office included Oesammun(外三門) Naesammun(內三門) Dongheon or Naea. Because an essential performance of provincial government office is provincial administration, the layout configuration of government office is a function, which is an expression of an official institution.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.78.1-78.1
• /
• 2013

The hierarchical model of galaxy formation predicts that galaxy halos contain merger relics in the form of long stellar stream. Thus, tidal substructure of stars around globular clusters, such as tidal tails, could be an essential evidence of the merging scenario in the formation of the Galaxy. From April 2010 to December 2012, we obtained $45^{\prime}{\times}45^{\prime}$ wide-field JHKs near-infrared photometric imaging data for about 20 globular clusters in the Milky Way, and examined the stellar density distribution around globular clusters. Here, we introduce the preliminary results of stellar spatial distributions and radial surface density profiles of four globular clusters. In order to minimize the field star contamination and identify the cluster's member candidates stars, we used a statistical filtering algorithm and gave weights on the CMDs of globular clusters. In two-dimensional stellar density maps, we could found tidal stripping structures for some globular clusters. The orientation of tidal substructure seems to associate with the effects of dynamical interactions with the Galaxy and cluster's orbit. Indeed, the radial surface density profile accurately describes this stripping structures as a break in the slope of profile. The observational results could give us further observational evidence of merging scenario of the formation of the Galaxy.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.469-473
• /
• 2006

In general, a classification process between ground data and non-ground data, which include building objects, is required prior to producing a DEM for a certain surface reconstruction from LiDAR data in which the DEM can be produced from the ground data, and certain objects like buildings can be reconstructed using non-ground data. Thus, an exact classification between ground and non-ground data from LiDAR data is the most important factor in the ground reconstruction process using LiDAR data. In particular, building objects can be largely used as digital maps, orthophotos, and urban planning regarding the object in the ground and become an essential to providing three dimensional information for certain urban areas. In this study, an entropy theory, which has been used as a standard of disorder or uncertainty for data used in the information theory, is used to apply a more objective and generalized method in the recognition and segmentation of buildings from raw LiDAR data. In particular, a method that directly uses the raw LiDAR data, which is a type of point shape vector data, without any changes, to a type of normal lattices was proposed, and the existing algorithm that segments LiDAR data into ground and non-ground data as a binarization manner was improved. In addition, this study proposes a generalized building extraction method that excludes precedent information for buildings and topographies and subsidiary materials, which have different data sources.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.535-540
• /
• 2005

In environmental impact assessment, noise impact assessment usually consists of three stages surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of project. When predicting noise level in urban area, this method does not consider acoustic phenomena like multi reflection, diffraction and absorption due to complex topographic configuration of building and terrains. For the purpose, a noise mapping tool is utilized to produce a series of noise maps, which are those for the present, for the works of construction and for the future. For accurate noise mapping, acoustical and topographic information is essential. Standard sound power levels and directivities of various construction equipments are required and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.6
• /
• pp.689-696
• /
• 2009

In this paper, a new user interface for unmanned combat vehicle(UCV) is developed based on the mission planning and global path planning. In order to complete a tactical mission given to an UCV, it is essential to design an effective interface scheme between human and UCV considering changing combat environment and characteristics of the mission. The user interface is mainly composed of two parts, mission planning and global path planning, since they are important factors to accomplish combat missions. First of all, mission types of UCV are identified. Based on mission types, the concept of mission planning for UCVs is presented. Then a new method for global path planning is devised. It is capable of dealing with multiple grid maps to consider various combat factors so that paths suitable for the mission be generated. By combining these two, a user interface method is suggested. It is partially implemented in the Dog-horse Robot of ADD and its effectiveness is verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1207-1214
• /
• 2017

In the case of frequent braking, when driving downhill or long distance, conventional brakes using friction are problematic in braking safety due to brake rupture and fading phenomenon. Therefore auxiliary brakes is essential for heavy vehicles. And several research has been actively conducted to improve energy efficiency by regenerating mechanical energy into electric energy when the vehicles brake. In this paper, a voltage control method is utilized to recover the electric energy generated in the electromagnetic retarder instead of the eddy current. To regenerate the braking energy into the electrical energy, a resonant L-C circuit is configured in the retarder. The retarder can be modeled as self-excited induction generator due to its operating principle. The driving conditions according to the retarder's parameters are made into 3-D maps. Also, the voltage of the resonant circuit changing depending on the driving pulse applied to the FET was analyzed. For the control of this voltage, we proposed an algorithm using the PI controller. The controlled voltage is converted by a 3-phase AC/DC converter and then charged to a battery inside the heavy vehicles through a DC/DC converter. Electromagnetic retarder and its controller are validated using Matlab Simulink. We also demonstrate the voltage controller through the actual M-G set experiment.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.6
• /
• pp.441-447
• /
• 2010

B13, a ceramide analogue, is a ceramidase inhibitor and induces apoptosis to give potent anticancer activity. A series of thiourea B13 analogues was evaluated for their in vitro cytotoxic activities against human renal cancer Caki-2 and leukemic cancer HL-60 in the MTT assay. Some compounds (12, 15, and 16) showed stronger cytotoxicity than B13 and C6-ceramide against both tumor cell lines, and compound (12) gave the most potent activity with $IC_{50}$ values of 36 and $9\;{\mu}M$, respectively. Molecular modeling of thiourea B13 analogues was carried out by comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). We obtained highly reliable and predictive CoMSIA models with cross-validated $q^2$ values of 0.707 and 0.753 and CoMSIA contour maps to show the structural requirements for potent activity. These data suggest that the amide group of B13 could be replaced by thiourea, that the stereochemistry of 1,3-propandiol may not be essential for activity and that long alkyl chains increase cytotoxicity.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.149-154
• /
• 2009

For the past few decades, residential improvement projects have been mainly carried out after demolition of the original dwelling place. So far, interests and opinions of the existing residents have largely been ignored during the projects. However, citizen participation in local redevelopment has recently been regarded as essential part as progress in democracy and diversified public interests have offered more importance to citizen participation in the implementation of public policies. While the importance of resident participation has been increasingly emphasized in principle, there still has been more to do in its application in reality. We should develop the experience of collecting community opinion to make them reflected in public policy, if we are to achieve the resident and citizen-centered society. The purpose of this study is to develop an image map tool that can be applied to "Maul-Mandulgi" projects as a visualized method to facilitate the exchange of opinions and work toward agreements. The tool is supposed to assist the public discussion by visualizing the policies and reducing the possibility of misunderstanding, so that residents can properly respond to them. In addition, this study will verify the effectiveness of the tool in the application to local community workshops.