• Journal of applied mathematics & informatics
• /
• 제8권2호
• /
• pp.327-343
• /
• 2001

This is a survey article on finite element a posteriori error estimates with an emphasize on gradient recovery type error estimators. As an example, the error estimator based on the ZZ patch recovery technique will be discussed in some detail.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권2호
• /
• pp.82-102
• /
• 2008

Packet losses tend to occur during short error bursts separated by long periods of relatively error-free transmission. There is also a significant spatial correlation in loss among the receiver nodes in a multicast session. To recover packet transmission errors at the transport layer, tree-based protocols construct a logical tree for error recovery before data transmission is started. The current tree construction scheme does not scale well because it overloads the sender node. We propose a scalable recovery tree construction scheme considering these properties. Unlike the existing tree construction schemes, our scheme distributes some tasks normally handled by the sender node to specific nodes acting as repair node distributors. It also allows receiver nodes to adaptively re-select their repair node when they experience unacceptable error recovery delay. Simulation results show that our scheme constructs the logical tree with reduced message and time overhead. Our analysis also indicates that it provides fast error recovery, since it can reduce the number of additional retransmissions from its upstream repair nodes or sender node.

• 대한임상검사과학회지
• /
• 제38권3호
• /
• pp.184-188
• /
• 2006

The purpose of the recovery experiment in clinical chemistry is performed to estimate proportional systematic error. We must know all measurements have some error margin in measuring analytical performance. Proportional systematic error is the type of error whose magnitude increases as the concentration of analyte increases. This error is often caused by a substance in the sample matrix that reacts with the sought for analyte and therefore competes with the analytical reagent. Recovery experiments, therefore, are used rather selectively and do not have a high priority when another analytical method is available for comparison purposes. They may still be useful to help understand the nature of any bias revealed in the comparison of kit experiments. Recovery should be expressed as a percentage because the experimental objective is to estimate proportional systematic error, which is a percentage type of error. Good recovery is 100.0%. The difference between 100 and the observed recovery(in percent) is the proportional systematic error. We calculated the amount of analyte added by multiplying the concentration of the analyte added solution by the dilution factor(mL standard)/(mL standard + mL specimen) and took the difference between the sample with addition and the sample with dilution. When making judgments on method performance, the observed that the errors should be compared to the defined allowable error. The average recovery needs to be converted to proportional error(100%/Recovery) and then compared to an analytical quality requirement expressed in percent. The results of recovery experiments were total protein(101.4%), albumin(97.4%), total bilirubin(104%), alkaline phosphatase(89.1%), aspartate aminotransferase(102.8), alanine aminotransferase(103.2), gamma glutamyl transpeptidase(97.6%), creatine kinase(105.4%), lactate dehydrogenase(95.9%), creatinine(103.1%), blood urea nitrogen(102.9%), uric acid(106.4%), total cholesterol(108.5), triglycerides(89.6%), glucose(93%), amylase(109.8), calcium(102.8), inorganic phosphorus(106.3%). We then compared the observed error to the amount of error allowable for the test. There were no items beyond the CLIA criterion for acceptable performance.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.379-391
• /
• 2004

This paper deals with the development of h-version adaptive mesh refinement and recovery strategy using variable-node elements and its application to various engineering field problems with 2D quadrilateral and 3D hexahedral models. The variable-node elements which have variable mid-side nodes on edges or faces are effectively used in overcoming some problems in connecting the different layer patterns of the transition zone between the refined and coarse mesh. A modified recovery technique of gradients adequate for variable-node elements and proper selection of error norms for each engineering field problems are proposed. In the region in which the error is greater than the permissible refinement error, the mesh is locally refined by subdivision. Reversely, in some parts of the domain having the error smaller than the permissible recovery error, the mesh is locally recovered (coarsened) by combination. Hierarchical structures (e.g. quadtrees and octrees) and element-based storage structures are composed to perform this adaptive process of refinement and recovery. Some numerical examples of a 3D heat conduction analysis of the concrete with hydration heat and a 2D flow analysis of vortex shedding show effectiveness and validity of the proposed scheme.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권2호
• /
• pp.137-150
• /
• 2016

In this paper we analyze an a posteriori error estimator based on flux recovery for lowest-order finite element discretizations of elliptic interface problems. The flux recovery considered here is based on averaging the discrete normal fluxes and/or tangential derivatives at midpoints of edges with weight factors adapted to discontinuous coefficients. It is shown that the error estimator based on this flux recovery is equivalent to the error estimator of Bernardi and $Verf{\ddot{u}}rth$ based on the standard edge residuals uniformly with respect to jumps of the coefficient between subdomains. Moreover, as a byproduct, we obtain slightly modified weight factors in the edge residual estimator which are expected to produce more accurate results.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.159-165
• /
• 2009

Through the understanding of the change of productivity and the ability of error recovery according to aging and the assessment and analysis of them, we may take this research to contribute to make a design for the road-map to help set up the policy of employment for old generation. For this we have taken an experiment of the coordination tester for 100 person who are chosen randomly and analysed the collected data using SAS, which is one of widely used statistical analysis packages. The main results are as follow: $\circledcirc$ The result of regression between the working speed and the length of the correction of error shows independence. (pr>0.2029). $\circledcirc$ The regression between age and working speed is statistically significant. (pr<0.0001) $\circledcirc$ The relation between age and the length of the correction of error is not significant. (pr>0.9123).

• 한국정보과학회논문지:정보통신
• /
• 제28권4호
• /
• pp.559-569
• /
• 2001

인터넷의 급속한 성장과 함께 멀티캐스트 프로토콜을 사용하는 어플리케이션들이 증가하고 있는 추세이다. 이러한 멀티캐스트 프로토콜에서 중요하게 요구되는 사항은 신뢰성과 확장성이다. 그 중 확장성을 향상시키기 위해서 여러 지역적 오류 복구 기법이 사용되고 있다. 본 논문에서는 기존의 지역적 오류 복구 기법에서 발생하는 제한점을 설명하고, 이 문제를 해결하기 위해서 보다 안정적이고 효과적인 프로토콜을 제안하였다. 제안된 프로토콜은 다음과 같은 세 가지 특성을 가진다. 첫 번째는 NAK 메시지를 기능에 따라 오류 복구 요청과 NAK-suppression으로 분리하여 각각 전송함으로써, 각 기능에 대해 최적화를 시키는 것이다. 두 번째는 점진적, 분산적으로 선정된 지역 대표가 오류 복구를 보다 결정적으로 수행하도록 하는 것이다. 세 번째는 제어 메시지의 TTL값을 동적으로 조정함으로써, 오류 복구 영역을 최소화시키는 것이다. 제안된 프로토콜은 시뮬레이션 상에서 다른 프로토콜과의 비교 실험을 통해 성능평가를 하였다. 실험 결과, 제안된 프로토콜은 오류 복구 시간과 네트워크 오버헤드를 감소시킴으로써 확장성을 향상시킨다는 것을 확인하였다.

• Journal of Communications and Networks
• /
• 제8권4호
• /
• pp.391-400
• /
• 2006

With the on-going wireless access technologies, the Internet has become accessible anytime anywhere. In wireless networks, link errors significantly degrade the performance of the transmission control protocol (TCP). To cope with this issue, this paper improves the recently-proposed terrestrial REFWA (T-REFWA) scheme by adding a new error recovery mechanism to its original design. In the T-REFWA scheme, senders are acknowledged with appropriate sending rates at which an efficient and fair utilization of network resources can be achieved. As the feedback values are computed independently of link errors, senders can keep transmitting data at high rates even in case of link error occurrences. Using this feature, the proposed error recovery mechanism can achieve high throughput in environments with high bit error rates. The throughput is further improved by disabling the exponential back-off algorithm of TCP so that long idle times are avoided in case of link errors. We show through simulations that the proposed method improves TCP performance in high bit error rates. Compared with several TCP variants, the proposed error recovery scheme exhibits higher link utilization and guarantees system fairness for different bit error rates.

• 정보처리학회논문지C
• /
• 제12C권5호
• /
• pp.733-740
• /
• 2005

IPv6 네트워크에서 SCTP를 기반으로 하여 트랜스포트 계층에서 이동성을 지원하는 방안을 제안하였다. 제안하는 방안에서는 단말의 이동에 따라 SCTP 연결에 매핑되는 종단 주소를 변경하기 위한 적절한 시점을 판단하는 기준을 제안하였고, 핸드오버에 효율적으로 대처하는 오류 복구 메커니즘을 제안하였다. 또한, 수치적 분석을 통해 기존 SCTP에 비하여 제안하는 방안이 핸드오버 지연과 손실복구시간을 줄임을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.329-334
• /
• 1998

This work is concerned with the problem of tracking a maneuvering target. In this paper, an error monitoring and recovery method of perception net is utilized to improve tracking performance for a highly maneuvering tar-get. Many researches have been performed in tracking a maneuvering target. The conventional Interacting Multiple Model (IMM) filter is well known as a suboptimal hybrid filter that has been shown to be one of the most cost-effective hybrid state estimation scheme. The subfilters of IMM can be considered as fusing its initial value with new measurements. This approach is also shown in this paper. Perception net based error monitoring and recovery technique, which is a kind of geometric data fusion, makes it possible to monitor errors and to calibrate possible biases involved in sensed data and extracted features. Both detecting a maneuvering target and compensating the estimated state can be achieved by employing the properly implemented error monitoring and recovery technique. The IMM filter which employing the error monitoring and recovery technique shows good tracking performance for a highly maneuvering target as well as it reduces maximum values of estimation errors when maneuvering starts and finishes. The effectiveness of the pro-posed method is validated through simulation by comparing it with the conventional IMM algorithm.