• The Journal of the Acoustical Society of Korea
• /
• v.23 no.7
• /
• pp.540-547
• /
• 2004

Since speech enhancement algorithms based on Kalman/Wiener filter require a priori knowledge of the noise and have focused on the minimization of the variance of the estimation error between clean and estimated speech signal, small estimation error on the noise statistics may lead to large estimation error. However, H/sub ∞/ filter does not require any assumptions and a priori knowledge of the noise statistics, but searches the best estimated signal among the entire estimated signal by applying least upper bound, consequently it is more robust to the variation of noise statistics than Kalman/Wiener filter. In this paper, we Propose a speech enhancement method using HMM and multi H/sub ∞/ filters. First, HMM parameters are estimated with the training data. Secondly, speech is filtered with multiple number of H/sub ∞/ filters. Finally, the estimation of clean speech is obtained from the sum of the weighted filtered outputs. Experimental results shows about 1dB∼2dB SNR improvement with a slight increment of computation compared with the Kalman filter method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.953-960
• /
• 2020

This paper presents an optimization of gear web design used in a main gear train of an engine reduction gearbox for a rotorcraft. The optimization involves the minimization of a total weight, transmission error, misalignment, and face load distribution factor. In particular, three design variables such as a gear web thickness, location of rim-web connection, and location of shaft-web connection were set as design parameters. In the optimization process, web, rim and shaft of gears were converted from the 3D CAD geometry model to the finite element model, and then provided as input to the gear simulation program, MASTA. Lastly, NSGA-II optimization method was used to find the best combination of design parameters. As a result of the optimization, the total weight, transmission error, misalignment, face load distribution factor were all reduced, and the maximum stress was also shown to be a safe level, confirming that the overall gear performance was improved.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.647-653
• /
• 2012

A short reaction mechanism for premixed $CH_4$-air flames at high pressure was developed using a reduction method based on the combined application of the simulation error minimization connectivity method and the iterative species-removal sensitivity method. It consisted of 43 species and 554 elementary reactions under the condition that it produces less than 5% of the maximum error. The flame structures obtained using a detailed reaction mechanism and the short reaction mechanism were compared for $CH_4$-air flames with various initial temperatures and equivalence ratios at high pressure, and the results were in good agreement. Therefore, the short reaction mechanism developed could reproduce the flame speeds, temperatures, and concentrations of major and minor species at high pressure.

• Journal of the Korean Society of Costume
• /
• v.57 no.5 s.114
• /
• pp.1-11
• /
• 2007

The purpose of this study was to analyze and minimize structural error between sample knitting and actual knitting in weft knitting apparel. Basic stitches used in this study were plain stitch, $0{\times}0$ rib stitch, $1{\times}1$ rib stitch, $2{\times}2$ rib stitch, Milan rib stitch. They were knitted into two different gauges(7 and 12 gauge) and 6 different sample sizes by computer program. The weight, length and width of these 5 basic knitting stitches were measured and their changes according to gauge, stitch and knitting were calculated and analyzed. The results were as follows; The weight of $0{\times}0$ rib stitch was the largest, followed by Milan rib stitch, $2{\times}2$ rib stitch, plain stitch and $1{\times}1$ rib stitch. As the density of stitch per unit area increases, the weight increases. The length of $0{\times}0$ rib stitch was the largest, followed by plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch and Milan stitch in both 7 and 12 gauge. As the number of course increases, the length increases accordingly. However, its increase ratio shows higher than that of number of course. It means that the reduction in number of course is needed to get aimed length. The width of Milan rib stitch was the largest, followed by $0{\times}0$ rib stitch, plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch in 7 gauge. In 12 gauge, Milan stitch, plain stitch and $0{\times}0$ rib stitch were the highest, followed by $2{\times}2$ rib stitch and $1{\times}1$ rib stitch. It showed that the change in shape of stitch influenced on the width more than the length of stitch.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.96-103
• /
• 2006

To establish of standard technique of nano-length measurement in 2D plane, new AFM system has been designed. In the long range (about several tens of ${\mu}m$), measurement uncertainty is dominantly affected by the Abbe error of XY scanning stage. No linear stage is perfectly straight; in other words, every scanning stage is subject to tilting, pitch and yaw motion. In this paper, an AFM system with minimum offset of XY sensing is designed. And XY scanning stage is designed to minimize rotation angle because Abbe errors occur through the multiply of offset and rotation angle. To minimize the rotation angle optimal design has performed by maximizing the stiffness ratio of motion direction to the parasitic motion direction of each stage. This paper describes the design scheme of full AFM system, especially about XY stage. Full range of fabricated XY scanner is $100{\mu}m\times100{\mu}m$. And tilting, pitch and yaw motion are measured by autocollimator to evaluate the performance of XY stage. As a result, XY scanner can have good performance. Using this AFM system, 3um pitch specimen was measured. The uncertainty of total system has been evaluated. X and Y direction performance is different. X-direction measuring performance is better. So to evaluate only ID pitch length, X-direction scanning is preferable. Its expanded uncertainty(k=2) is $\sqrt{(3.96)^2+(4.10\times10^{-5}{\times}p)^2}$ measured length in nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.583-591
• /
• 2008

This paper proposes a resource allocation algorithm for minimizing the overall distortion of multiple users in orthogonal frequency division multiplex (OFDM). The proposed algorithm exploits the diversity of multiuser and the rate-distortion function using packet distortion model in a system with limited resources. We first induce a rate-distortion function considering error concealment and error propagation properties of H.264 video structures. Then we perform adaptive resource allocation utilizing multiuser diversity for minimizing the overall video quality degradation. We also consider the proportional rate which is pre-determined for each user. Simulation results show that compared to the previous time division multiple access method and the resource allocation method maximizing data rate, the proposed rate allocation algorithm substantially improves the received video quality.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.109-114
• /
• 2015

This paper relates with the eualization performance of Adaptive Varying-MMA (AV-MMA) in order to the minimization of intersymbol interference that is occurs in the nonlinear communication channel. In order to obtain the error signal in the tap coefficient updating process of adaptive equalization algorithm, the present MMA uses the constant modulus. But in AV-MMA, the adaptively varying modulus are used according to the equalizer output, it is possible to reduce the error signal and possbile to improving the overall equalization performance. In order to improved equalization performance of the AV-MMA in the 64-QAM signal, the present MMA performance were compared. For this, the output signal constellation of equalizer, residual isi, maximum distortion, MSE and SER curves are applied. As a result of computer simulation, the AV-MMA has more better performance in the every performance index than MMA, and the SER performance shows that it has more robustness in high SNR environmnet compared to MMA.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.35-44
• /
• 2007

Since the omnidirectional camera system with a very large field of view could take many information about environment scene from few images, various researches for calibration and 3D reconstruction using omnidirectional image have been presented actively. Most of line segments of man-made objects we projected to the contours by using the omnidirectional camera model. Therefore, the corresponding contours among images sequences would be useful for computing the camera transformations including rotation and translation. This paper presents a novel two step minimization method to estimate the extrinsic parameters of the camera from the corresponding contours. In the first step, coarse camera parameters are estimated by minimizing an angular error function between epipolar planes and back-projected vectors from each corresponding point. Then we can compute the final parameters minimizing a distance error of the projected contours and the actual contours. Simulation results on the synthetic and real images demonstrated that our algorithm can achieve precise contour matching and camera motion estimation.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.379-386
• /
• 2005

This paper provides a rigorous theory for analysis of quantization effects and optimum filter bank design in quantized multidimensional subband filter banks. Even though subband filter design has been a hot topic for last decades, a few results have been reported on the subband filter with a quantizer. Each pdf-optimized quantizer is modeled by a nonlinear gain-plus-additive uncorrelated noise and embedded into the subband structure. Using polyphase decomposition of the analysis/synthesis filter banks, we derive the exact expression for the output mean square quantization error. Based on the minimization of the output mean square error, the technique for optimal filter design methodology is developed. Numerical design examples for optimum nonseparable paraunitary and biorthogonal filter banks are presented with a quincunx subsampling lattice. Through the simulation, $10\~20\;\%$ decreases in MSE have been observed compared with subband filter with no quantizers especially for low bit rate cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6296-6302
• /
• 2014

A new technique, which can increase the channel bandwidth in an optical wireless orthogonal frequency division multiplexing (OFDM) link based on a light emitting diode (LED), is proposed. The technique uses adaptive sampling to convert an OFDM signal to a sparse waveform. In compressive sensing (CS), a sparse signal that is sampled below the Nyquist/Shannon limit can be reconstructed successively with sufficient measurements. The data rate of the proposed CS-based visible light communication (VLC)-OFDM link increases from 30.72 Mb/s to 51.2 Mb/s showing an error vector magnitude (EVM) of 31 % at the quadrature phase shift keying (QPSK) symbol.