• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2056-2059
• /
• 2003

The rate control is very important to solve the difficulties arising from bit-rate on transmission through channel and to improve video quality. It is very important to point out that the amount of output bit obtained the encoding process using rate controller brings many problems on the transmission of channels and furthermore output bitstream decoded affects directly on the visual quality of displayed subject. In this paper, the effective rate control algorithm by rate-distortion modeling using MPEG-4 encoder is proposed. The proposed rate control has applied different weighting by VOP prediction type and even in the same VOP prediction type, the predicted reference allocates more bit. Through these bit allocation the minimization of distortion can be achieved preventing propagation of quantization error The amount of saved bitstream obtained by the proposed algorithm in this thesis is allocated to I-VOP using region of interest(ROI) selective enhancement on the next GOV encoding process and this process brought the improvement of visual quality.

• Journal of applied mathematics & informatics
• /
• v.7 no.1
• /
• pp.183-193
• /
• 2000

In this paper we use measure theory to solve a wide range of second-order boundary value ordinary differential equations. First, we transform the problem to a first order system of ordinary differential equations(ODE's)and then define an optimization problem related to it. The new problem in modified into one consisting of the minimization of a linear functional over a set of Radon measures; the optimal measure is then approximated by a finite combination of atomic measures and the problem converted approximatly to a finite-dimensional linear programming problem. The solution to this problem is used to construct the approximate solution of the original problem. Finally we get the error functional E(we define in this paper) for the approximate solution of the ODE's problem.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2302-2312
• /
• 2000

An active control of the transmission of noise through an aircraft fuselage is investigated numerically. A cylinder-cavity system was used as a model for this study. The fuselage is modeled as a fi nite, thin shel cylinder with constant thickness. The sound field generated by an exterior monopole source is transmitted into the cavity through the cylinder. Point force actuators on the cylinder are driven by error sensor that is placed in 3D cavity. Modal coupling theory is used to formulate the numerical models and describe the system behavior. Minimization of the acoustic potential energy in the fuselage is carried out as a performance index. Continuous parameter genetic algorithm is used to search the optimal actuator position and both results are compared.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2017

High-precision wire is one of the most important components of lead production. However, no studies have been performed on the dimensional tolerance of these wires, and their capabilities have been deduced through trial and error. Therefore, PIANO, a commercial PIDO tool, was used to systematically determine the optimal parameters for stress minimization. The values obtained from the optimum design were modeled and analyzed using LS-Dyna, a finite element analysis program. Maximum stress was reduced by about 10% compared to its initial values, and the wire now satisfies dimensional tolerance ($10{\mu}m$).

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.63-73
• /
• 2000

Internet becomes very common tool for communication and data sharing. Virtual reality(VR) on web browser, and virtual prototyping and virtual manufacturing is widely used in many engineering folds. The reduction of overall development process and error minimization during data conversion becomes very crucial where sharing data via Internet and VR. This paper deals with the advantage and disadvantage of VRML format used in RP(Rapid Prototyping), and a software for RP data preparation is developed. If VRML format as an international standard for VR, is replaced with STL format, the weak points of STL format can be overcome and the technique related to virtual prototyping and virtual manufacturing can be addressed more systematically by sharing the data. The system developed in this work shows a good window to get access to a more realistic observation of an object fur an RP system from a long remote sites in a more systematic way.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.367-372
• /
• 2009

In this paper we propose an electronic domain timing phase selection scheme for the optical communication systems suffering from inter-symbol-interference (ISI) distortion due to chromatic dispersion (CD) or polarization mode dispersion (PMD). In the presence of CD/PMD a proper timing phase selection is important for discrete time domain equalizers, since different timing phases produce different nonlinear ISI channels of different severity. The proposed timing phase recovery scheme based on dispersion minimization (DM) practically approximates the optimal minimum mean squared error (MMSE) timing phase without training signals which reduces overall throughput substantially, especially in time-varying channels such as PMD. The simulation results show that the proposed DM timing agrees with MMSE timing phase, under proper normalization of the received signals, for various dispersion and OSNR.

• Journal of the Korean Society of Combustion
• /
• v.20 no.4
• /
• pp.49-55
• /
• 2015

A short kinetic mechanism for premixed benzene/air flames was developed with a reduction method of Simulation Error Minimization Connectivity Method(SEM-CM). It consisted of 38 species and 336 elementary reactions. Flame speeds were calculated and compared with those from full mechanisms and experiments of other researchers. Flame temperature, the heat release rate, the concentration profiles of major species and radicals were also calculated with both mechanism. Those comparisons are in good agreement between the full mechanism and the short mechanism at high pressure condition. In numerical work the running time with the short mechanism was over 12 times faster than one with the full mechanism.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.3
• /
• pp.211-217
• /
• 2000

A main contribution of this paper is the development of a Hopfield network-based algorithm for the fault diagnosis of the actuators in linear system with uncertainties. An unknown input decoupling approach is introduced to the design of an adaptive observer so that the observer is insensitive to uncertainties. As a result, the output observation error equation does not depend on the effect of uncertainties. Simultaneous energy minimization by the Hopfield network is used to minimize the least mean square of errors of errors of estimates of output variables. The Hopfield network provides an estimate of the gains of the actuators. When the system dynamics changes, identified gains go through a transient period and this period is used to detect faults. The proposed scheme is demonstrated through its application to a simulated second-order system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1217-1223
• /
• 2015

In this paper, we study the problem of torque ripple minimization in Brushless DC Motors (BLDC) and proposes a disturbance observer (DOB) based controller in order to efficiently reduce the torque ripple. In the DOB based control system, an equivalent disturbance (plant disturbance and effect of modelling error) is cancelled by its estimate. When the DOB controller is applied to BLDC motors, the effect of inverter switching is considered as an equivalent disturbance and to be cancelled by the DOB controller. Through computer simulations, it is shown that the performance of the proposed DOB controller is superior to that of the conventional PI controller. In the case where the numerical values of resistance and inductance are not known exactly, it is shown that the proposed DOB controller achieves better performance than the PI controller.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.310-315
• /
• 2011

General portal machine represents a distinct weak spot concerning their structural behavior because of long protruding structure components, such as saddles and rams. The weak point causes the deformation of the machine tool and consequently rises a severe machining error. The purpose of this study is to improve the structural design of crossrail in order to minimize it's distortion. Tool Center Point (TCP) was chosen as a reference point for evaluating the distortion effect of a crossrail and topological optimization was adopted as a method of structural design improvement. The displacements of TCP according to the machining positions were investigated by structural analyses for both of original crossrail design and the improved one. The comparing results showed that the displacement of TCP could be reduced about 55% maximum.