• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.592.1-592
• /
• 2001

Conventional intraoral radiography continues to be the most widely used for the diagnosis of dental caries. But conventional intraoral film has several shortcomings, including processing error, increased radiation dose, etc. Recently, various digital radiographs substitude for conventional radiography to overcome these disadvantages. The digital radiographies are numerous advantages, including elimination of processing errors, lower radiation dose, image quality enhancements such as contrast and density modulation.(omitted)

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.863-872
• /
• 2012

The squareness measurement of driving axes of a machine tool is very important to evaluate the performance of the machine. Laser interferometer measurement system is one of the most reliable equipment to measure the squareness. However, squareness measurement using laser system with an optical square result in restriction of straightness optics setup and Abbe's offset. This offset combines with angular errors during the motion of an axis to cause Abbe's error. In addition, the difficulty in optical square setup causes restriction of other optics and limitation of measurable range. In this paper, mathematical approaches are presented to eliminate the Abbe's error and to estimate squareness for full range by using the best fit of straightness data measured without an optical square. Experiments for squareness measurement of 3 axis machine tool were conducted and the proposed techniques were used for squareness evaluation with elimination of Abbe's error and squareness estimation for the full travel range.

• 한국통신학회논문지
• /
• 제32권2C호
• /
• pp.166-173
• /
• 2007

OFDM(Orthogonal Frequency Division Multiplexing) 시스템에서 채널추정을 위해 사용되는 파일럿에 발생하는 협대역 재밍은 시스템 성능에 나쁜 영향을 준다. 본 논문에서는 이 문제를 해결하기 위해 재밍된 파일럿을 검출하여 제거할 수 있는 방법을 제안한다. 또한, 한 개의 OFDM 심볼에서 재밍된 파일럿과 제거된 파일럿으로 인해 발생하는 평균 제곱 오류(Mean Squared Error, MSE)를 분석한다. 그리고, 실험을 통해 제안된 알고리즘을 사용한 채널추정 구조의 심볼 오류율(Symbol Error Rate, SER) 성능을 평가한다. 제안된 방법은 재밍 전력이 높은 환경에서 채널추정 성능을 향상시킬 수 있음을 확인하였다.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.135-153
• /
• 2020

There has been a sustained interest towards the non-contact structural displacement measurement by means of videogrammetric technique. On the way forward, one of the major concerns is the spurious image drift induced by temperature variation. This study therefore carries out an investigation into the temperature effect of videogrammetric technique, focusing on the exploration of the mechanism behind the temperature effect and the elimination of the temperature-caused measurement error. 2D videogrammetric measurement tests under monotonic or cyclic temperature variation are first performed. Features of measurement error and the casual relationship between temperature variation and measurement error are then studied. The variation of the temperature of digital camera is identified as the main cause of measurement error. An excellent linear relationship between them is revealed. After that, camera parameters are extracted from the mapping between world coordinates and pixels coordinates of the calibration targets. The coordinates of principle point and focal lengths show variations well correlated with temperature variation. The measurement error is thought to be an outcome mainly attributed to the variation of the coordinates of principle point. An approach for eliminating temperature-caused measurement error is finally proposed. Correlation models between camera parameters and temperature are formulated. Thereby, camera parameters under different temperature conditions can be predicted and the camera projective matrix can be updated accordingly. By reconstructing the world coordinates with the updated camera projective matrix, the temperature-caused measurement error is eliminated. A satisfactory performance has been achieved by the proposed approach in eliminating the temperature-caused measurement error.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.77-84
• /
• 2014

The worm gear is used in the motor drive system of automotive CVVL because of its compactness and self-locking ability. A ZK worm and an involute helical gear can be meshed in order to reduce production cost. However, the gearing is not suitable for the reliability and the NVH problem. To improve the dynamic performances, an optimal design process is considered. The transmission error is calculated theoretically and minimized with the several gear design parameters. An inequality condition such as the teeth interference elimination is added.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.114.1-114
• /
• 2001

GPS Receiver gives pseudorange Doppler and integrated carrier phase for measurements to compute navigation information. Thought the integrated carrier phase can be transfer to the equal domain as pseudorange by multiplying the wave length of the received signal, in order to get position information from the carrier phase measurements the integer ambiguity should be resolved. And differencing technique is generally used to eliminate the common error terms of the integrated carrier phase measurements between robber and server. In short baseline double-differencing operation has effect on elimination the common biases for both stations and thus ambiguity resolution are to be reliable. But the baseline increases, the integer ambiguity resolution is hardly, due to the correlated common error is increase ...

• 대한인간공학회지
• /
• 제14권2호
• /
• pp.75-85
• /
• 1995

The purpose of this study is to develop a force-platform system suitable for real situations in industry. The developed system is a 3-axis measurement type. It consists of force-transmission, force measuring circuit, and the software that analyzes the measured force. The force-transmission transmits forces to 3 axes, which has a physical structure to minimize the interference among those axes. Force measuring circuit consists of DSP (digital signal processor) for flexible disposal of change of measurement algorithm, elimination of noise and maintenance of precision. The functions of the software are the calibration which revises the measurement error occuring during data acquisition, and various analyses of forces. The result of the experiment shows that the developed system has about 1% measurement error, is stable for repeated experiments, and is not effected by temperature change.

• ETRI Journal
• /
• 제34권5호
• /
• pp.719-726
• /
• 2012

Messages are generally selected with the same probability in the encoding scheme of rateless codes for equal error protection. In addition, a belief propagation (BP) decoding scheme is generally used because of the low computational complexity. However, the probability of recovering a new message by BP decoding is reduced if both the recovered and unrecovered messages are selected uniformly. Thus, more codeword symbols than expected are required for the perfect recovery of message symbols. Therefore, a new encoding scheme with a nonuniform selection of messages is proposed in this paper. In addition, a BP-Gaussian elimination hybrid decoding scheme that complements the drawback of the BP decoding scheme is proposed. The performances of the proposed schemes are analyzed and compared with those of the conventional schemes.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권3호
• /
• pp.127-138
• /
• 2018

Spoofing attacks including meaconing can provide a bogus position to a victim GPS receiver, and those attacks are notably difficult to detect at the point of view on the receiver. Several countermeasure techniques have been studied to detect, classify, and cancel the spoofing signals. Based on the countermeasure techniques, we have developed an anti-spoofing equipment that detects and mitigates or eliminates the spoofing signal based on raw measurements. Although many anti-spoofing techniques have been studied in the literatures, the evaluation test system is not deeply studied to evaluate the anti-spoofing equipment, which includes detection, mitigation, and elimination of spoofing signals. Each study only has a specific test method to verify its anti-spoofing technique. In this paper, we propose the performance evaluation test system that includes both spoofing signal injection system and its injection scenario with the constraints of stand-alone anti-spoofing techniques. The spoofing signal injection scenario is designed to drive a victim GPS receiver that moves to a designed position, where the mitigation and elimination based anti-spoofing algorithms can be successively evaluated. We evaluate the developed anti-spoofing equipment and a commercial GPS receiver using our proposed performance evaluation test system. Although the commercial one is affected by the test system and moves to the designed position, the anti-spoofing equipment mitigates and eliminates the injected spoofing signals as planned. We evaluate the performance of anti-spoofing equipment on the position error of the circular error probability, while injecting spoofing signals.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권10호
• /
• pp.949-955
• /
• 2005

본 논문에서는 기존의 전영역 탐색 방식의 계산량을 현저히 줄임과 동시에 동일한 예측 화질을 얻기 위해, 기준 블록의 복잡도 순서와 정방형 서브블럭을 가지고 복잡한 영역 세분화를 통한 고속 블록 매칭(block matching) 알고리즘을 제안하였다. 매칭 에러가 기준 블록 기울기 크기에 비례한다는 것을 이용하여 종래의 순차적인 매칭 스캔(matching scan) 과 행/열 기반의 적응 매칭 스캔 대신, 복잡도에 기초한 정방형 서브 블록(sub-block) 적응 매칭 스캔을 가지고 불필요한 계산을 효율적으로 줄였다. 제안된 알고리즘은 예측 화질의 저하 없이 기존의 PDE(partial distortion elimination) 알고리즘을 이용한 전영역 탐색 방법에 비해 $30\%$의 계산량을 줄였으며, MPEG-2 및 MPEG-4 AVC를 이용하는 비디오 압축 응용분야에 유용하게 사용될 수 있을 것이다.