• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.695-701
• /
• 1999

Thermal sprayed Ni-Cr alloy coating on the carbon steel was carried out erosion-corrosion test and electrochemical corrosion test in the marine environment. THe erosion-corrosion behavior and electrochemical corrosion characteristics of substrate(SS400) and thermal sprayed Ni-Cr coating was investigated, The erosion-corrosion control efficiency of Ni-Cr coating to substrate was also estimated quantitatively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.72-74
• /
• 2002

In this paper, we showed the erosion characteristics of MgO protector layer releated to lifetime of plasma display panel(PDP). We observed MgO erosion characteristic as a functions of deposition conditions. In RIE condition of Xe gas, the lowest erosion rate appears in the conditions of no heating, bias voltage -30V and pressure 5mtorr. In general. as deposition rate increases, erosion rate decreases.

• 대한소아치과학회지
• /
• 제43권3호
• /
• pp.264-274
• /
• 2016

최근 세계적으로 치아침식증에 대한 관심이 급증하고 인식의 변화가 나타나 많은 연구보고가 있었다. 우리나라 국민건강 영양조사에 따르면 청소년기로 갈수록 1일 탄산음료 섭취량이 늘고 있는 추세이며, 이는 청소년들이 치아침식증에 취약할 수 있음을 시사한다. 하지만 우리나라에서는 이에 대한 인식이 아직 미진하고, 치과계에서도 연구적, 임상적 관심이 그리 높지 않은 실정이다. 본 연구는 양산시 청소년들의 영구치에 나타난 치아침식증의 유병율을 조사하고 설문지를 통하여 그 위험요인을 분석할 목적으로 시도되었다. 양산시에 거주하는 13-15세 중학생 1,371명을 대상으로 단일 검사자가 영구치의 치아침식증 상태를 조사하였다. 치아침식증의 평가기준으로는 Visual Erosion Dental Examination system을 사용하였다. 또한 설문지를 통하여 이들의 식이습관 및 구강위생상태와 치아침식증 간 유의성을 비교 분석하였다. 치아침식증은 676명(49.3%)에서 관찰되었고, 남성(46.4%)에 비해 여성(53.0%)이 더 높은 유병율을 보였다(p < 0.05). 상악(39.3%)에 비해 하악(43.0%)에서 더 높았으나(p < 0.05), 좌 우측 간에는 차이가 없었다. 구치에 비해 전치의 유병율 및 치아 당 평균점수가 높았다. 가당 및 무가당우유는 치아침식증에 영향을 미치는 반면(p < 0.05), 다른 음료, 식이섭취방법, 구강위생, 그리고 BMI의 영향은 미미했다(p > 0.05). 본 연구에서 나타난 유병율은 20~30% 내외인 다른 보고들에 비해 높았으며, 남성이 호발한다는 기존의 보고들과 달리 여성에서 유병율이 더 높았다.

• 한국해안해양공학회지
• /
• 제14권4호
• /
• pp.247-256
• /
• 2002

동해안에 위치한 대부분의 중소어항은 주로 백사장 주위에 건설되어져 있으며, 이러한 어항 구조물은 인근 백사장의 침식에 중요한 영향을 끼쳐왔다. 이와 같은 문제를 해결하기 위해서는 우선, 사전예측 및 해안침식현상의 정확한 재현을 통해 그 원인을 파악하고검증할 필요가 있다. 아울러 대상해안에 적합한 침식 대책공법을 강구하여야 한다. 본 연구에서는 경제적인 측면을 고려하여 중소어항 주변해안에 실질적으로 적용할 수 있는 해안침식 대책을 도출하고, 그에 대한 방지효과를 수치시뮬레이션을 통해 검토하였다

• Journal of Welding and Joining
• /
• 제5권2호
• /
• pp.27-34
• /
• 1987

The characteristics of arc sprayed layer were studied with hardness test and microstructural observation. The erosion resistance of arc sprayed layer was also evaluated using a method of steel ball blasting test which was proposed in this study as a test method for measuring the erosion properties in the impact wear condition. By an impact of the molten droplets on the redeposited substrate, lamella structure was formed which contains laminated oxide layers, fissures, and porosities. As a result of mechanical tests, it was shown that the sprayed specimen showed higher hardness than the substrate, but it resulted in higher erosion rate than the substrate. The poor erosion property obtained with a sprayed coating was considered to be attributable to easy flaking off the the layers laminated with brittle oxide layers.

• Tribology and Lubricants
• /
• 제9권1호
• /
• pp.55-61
• /
• 1993

Recently, due to the erosion damage that were generated increasingly at alloy metals of slide bearing by cavity of lubricating oil with tendency of high speed and high output of reciprocating engine, there is a need to study the process on the formation of cavitation erosion, and the characteristic of cavitation erosion at lubricating oil environments under various condition for marine ship. Therefore, the apparatus of cavitation erosion experiment used 20 KHz, $24 \mu m$ piezoelectric vibrator. The main results obtained through this test method are as follows: 1. The max. erosion rate at lubricating oil environments was related to the change of space, oil film thickness, and shown to tendency of gear oil>system oil>turbine oil>mixed oil environments with different viscosity. 2. The pitted hole by cavitation erosion at high viscosity oil environments became small and deep, and in addition to, they appeared to be wide and shallow at low viscosity.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.114-121
• /
• 2003

Water droplet erosion is one of major concerns in the design of modern large fossil steam turbines because it causes serious operational problems such as performance degradation and reduction of service life. A new erosion model has been developed in the present study for the prediction of water droplet erosion of rotor blades operated in wet steam conditions. The major four erosion parameter : impact velocity, impacting droplet flow rate, droplet size and hardness of target are involved in the model so that it can also be used for engineering purpose at the design stage of rotor blades. Comparison of the predicted erosion rate with the measured data obtained from the practical steam turbine operated for more than 90,000 hours shows good agreement.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.94-101
• /
• 2013

In the present study, a practical method to predict cavitation erosion, which caused a critical damage on hydraulic machineries, was developed. Impact and critical velocities were defined to develop a practical method for the prediction of cavitation erosion. To develope the practical method, the computational fluid dynamics (CFD) was introduced. Cavitating flows with erosion in a converging-diverging nozzle and around a hydrofoil were simulated by developed and validated code. Based on the CFD results, the cavitation erosion coefficient was derived by a curve fitting method. The cavitation erosion coefficient was formulated as the function of the cavitation and Reynolds numbers. A cavitating flow in an axisymmetric nozzle followed by radial divergence was simulated to validate the developed practical method. For the application to a propeller, a cavitating flow around a propeller was simulated. Predicted damage extent showed similar with damaged full-scale propeller blade.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.143-151
• /
• 2021

In this study, optimal shot peening process conditions were investigated for improving the cavitation erosion resistance of gray cast iron under a marine environment. Shot peening was performed with variables of injection pressure and injection time. The durability was then evaluated through cavitation erosion test which was conducted according to the modified ASTM G-32 standard. The tendency of cavitation erosion damage according to shot peening process condition was investigated through weight loss rate, surface and cross-sectional analysis of the specimen before and after the test. As a result, the shot peening process condition that could minimize cavitation erosion was when the injection pressure was the lowest and when the injection time was the shortest. This was because the flake graphite exposed on the gray cast iron surface could be easily removed under such condition. Therefore, the notch effect can be prevented by surface modification. In addition, the cavitation erosion damage mechanism of gray cast iron was discussed in detail.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.316-316
• /
• 2021

Erosion in a watershed is one of the main sources of sediment inflow in dams. While sediment management practices can be performed to reduce and manage sedimentation in reservoirs, managing the sediment inflow before it reaches the reservoir should also be consider. The accurate location of areas with high erosion and deposition rates should be determined in order to propose an appropriate sediment management procedure such as the construction of check dams. In this study, the projected rainfall from HadGEMRA-3 for RCP 8.5, was used in C-SEM, a distributed rainfall-erosion model, to determine the projected spatial erosion patterns in Cheoncheon catchment, which is located in the upstream part of Yongdam Dam.