• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.90-96
• /
• 2007

The purpose of this study was to compare the joint position sense at the knee joint at 3 different surface conditions by using the active knee joint angle reproduction test in the standing position. Twenty healthy volunteers (10 males and 10 females) age 20~29 years were recruited for this study. The knee joint position senses were assessed at three different surface conditions: on the floor (stable condition), TOGU (soft condition), and seat fit (unstable condition) in a closed kinetic chain. Testing orders were selected randomly. The absolute angle error was defined as the absolute difference between target angles ($30^{\circ}{\sim}45^{\circ}$ knee flexion) and subject perceived angle of the knee flexion. One way ANOVA was used to compare the absolute angle of error among 3 different conditions. The Independent t-test was used to compare the absolute angle of error between male and female. The error angles were significantly different among surface conditions ($1.3^{\circ}{\pm}1.2^{\circ}$ for the floor, $2.1^{\circ}{\pm}0.9^{\circ}$ for the TOGU, and $4.4^{\circ}{\pm}1.8^{\circ}$ for the seat fit, p<.05). There was no significant difference in error angle between male and female. In conclusion, the joint position sense of the knee joint in the closed kinetic chain decreased at unstable surface conditions. The result of this study indicates that surface conditions should be considered when assessing and training the joint position sense of the knee joint in clinical setting.

• Physical Therapy Korea
• /
• v.20 no.4
• /
• pp.32-39
• /
• 2013

Abdominal curl-up exercise may excessively increased superficial neck flexor such as sternocleidomastoid (SCM) muscle. Also, the muscle activity of the abdominal muscles haven't investigated during abdominal curl-up with craniocervical flexion (CCF). Therefore, the purpose of our study was to determine the effect of CCF on the muscle activity of the abdominal and SCM muscles during abdominal curl-up. Twelve healthy subjects (six men and six women) with no history of abdominal or lower back pain within 6 weeks were recruited. Surface electromyographic signals were collected on SCM, rectus abdominis (RA), internal oblique (IO), and external oblique (EO) muscles bilaterally during performing the traditional abdominal curl-up and the abdominal curl-up with CCF. Paired t-tests were used to compare the differences in the muscle activity of the bilateral SCM, RA, EO, and IO muscles between the traditional abdominal curl-up and the abdominal curl-up with CCF (p<.05). There was significantly lower electromyogram (EMG) activity of the both SCMs during the abdominal curl-up with CCF (Right SCM, $39.50{\pm}15.29%MVIC$; Left SCM, $38.24{\pm}17.31%MVIC$) than with the traditional abdominal curl-up (Right SCM, $54.85{\pm}20.05%MVIC$; Left SCM, $53.18{\pm}26.72%MVIC$) (p<.05). The activity of abdominal muscles were not significantly different between the traditional abdominal curl-up and the abdominal curl-up with CCF. The abdominal curl-up with CCF requires significantly less muscle activity of SCM. Consequently, the abdominal curl-up with CCF is recommended to prevent excessive activation of superficial cervical flexors during abdominal curl-up exercise.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.4 s.32
• /
• pp.61-68
• /
• 2006

Safety is the most important issue in the construction industry. Especially, work-related disease is increasing and resulted in lack of young workers and high turnover due to its 3D industrial image. The main objective of this paper is to identify the relationship of WRMSD with hand tools used in the building construction industry. In order to reach to the goals, the survey and interviews with laborers are conducted. The data is analyzed in a statistical manner. One of the interesting findings from the research is that the carpenters and steelworkers are the principal trade group suffering from WRMSD due to unsafe working condition and method. The results of the research will be used as the basis for the ergonomic design of the better construction working condition and hand tools.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.58-64
• /
• 2011

This study evaluated the effects of the handle width(shoulder width, 1.25${\times}$shoulder width, 1.5${\times}$shoulder width), height(3 levels : knee, medium, knuckle) and horizontal angle($0^{\circ}$, $10^{\circ}$) on the pushing, lifting, and twisting strengths which were required for carrying single or two wheel barrows. Twelve healthy college students(male) participated in the experiment. In each experimental condition($3{\times}3{\times}2$=18), the subjects exerted three forces(pushing, lifting, and twisting clockwise). The experimental conditions and three forces were tested in random order, and a minimum 2 minutes of rest was provided between exertions. Results showed that the mean and maximum pushing forces showed greater values when the horizontal angle was $0^{\circ}$ than $10^{\circ}$(p=0.016). However, the three independent variables had no statistically significant effects on the lifting forces(p>0.1). The mean and maximum twisting forces increased as the handle width became larger(p<0.05). Also, there was a marginal effect of the horizontal angle(p=0.065) on the twisting force. From the results of this study, the horizontal angle of $0^{\circ}$ and the wider handle width were suggested for the design of single-wheel barrows.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.827-839
• /
• 2009

Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.

• Safety and Health at Work
• /
• v.8 no.4
• /
• pp.364-370
• /
• 2017

Background: Labeled noise reduction (NR) data presented by manufacturers are considered one of the main challenging issues for occupational experts in employing hearing protection devices (HPDs). This study aimed to determine the actual NR data of typical HPDs using the objective fit testing method with a microphone in real ear (MIRE) method. Methods: Five available commercially earmuff protectors were investigated in 30 workers exposed to reference noise source according to the standard method, ISO 11904-1. Personal attenuation rating (PAR) of the earmuffs was measured based on the MIRE method using a noise dosimeter (SVANTEK, model SV102). Results: The results showed that means of PAR of the earmuffs are from 49% to 86% of the nominal NR rating. The PAR values of earmuffs when a typical eyewear was worn differed statistically (p < 0.05). It is revealed that a typical safety eyewear can reduce the mean of the PAR value by approximately 2.5 dB. The results also showed that measurements based on the MIRE method resulted in low variability. The variability in NR values between individuals, within individuals, and within earmuffs was not the statistically significant (p > 0.05). Conclusion: This study could provide local individual fit data. Ergonomic aspects of the earmuffs and different levels of users experience and awareness can be considered the main factors affecting individual fitting compared with the laboratory condition for acquiring the labeled NR data. Based on the obtained fit testing results, the field application of MIRE can be employed for complementary studies in real workstations while workers perform their regular work duties.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.3
• /
• pp.319-329
• /
• 2018

Objectives: The object of this paper is to analyze difference of general and occupational characters, risk exposure and ill health symptom depending on the special type of employment. Methods: 50,007 participants from Fourth Korean Working Condition Survey conducted in 2014 was analyzed. Cross-tabulation analysis was conducted for deriving difference in general and occupational characters, mulitvariate logistic regression analysis was conducted after controlling general and occupational characters for deriving difference in risk exposure and ill health symptom depending on the special type of employment. Results: In the special type of employment, female, ages of 50, education levels of high school, monthly income of 2,000-3,000 thousand won, job types of sales person, enterprises of less than 100 workers, working duration of 2-10 years and long working hours worker's proportion was higher than general employment. Physical(OR: 0.84, 95% CI: 0.76-0.94) and ergonomic (OR: 0.48, 95% CI: 0.42-0.55) risk exposure was lower, psychological(OR: 1.77, 95% CI: 1.54-2.04) risk exposure was higher than general employment, and there was no significant difference between the special type of employment and general employment in chemical/biological risk exposure(OR: 1.06, 95% CI: 0.94-1.20) and ill health symptom(OR: 0.98, 95% CI: 0.89-1.09). Conclusions: This article offers the analysing difference between the special type of employment and general employment using huge size cross sectional data represent Korean employees.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.203-208
• /
• 2019

Medical color graphic research will serve as the basis for globally expanding and disseminating the design quality of the company's products through the era of production of medical robots. This study was based on technologies and contents suitable for the era of medical robot bed expansion, universal medical color application, ergonomic color, etc. In addition, the medical bed robot's color research direction was presented from the perspective of universal design. Accordingly, a universal color design was proposed, taking the functions of a medical robot under development by a domestic company as an example. The characteristics of this robot bed can be divided into three types of functions: first, treatment characteristics for prevention of pressure ulcers with curative, second, automatic seat exchange with cleanliness for medical environment, and third, Convenient, which can implement patient transport. The main idea is to present a combination of functional colors appropriate for this. The resulting color analysis and universal color design techniques could be a useful methodology for illustrating the appearance and function of a modern medical robot bed.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.268-278
• /
• 2015

Background: This study aimed to assess the whole-body vibration (WBV) exposure among large blast hole drill machine operators with regard to the International Organization for Standardization (ISO) recommended threshold values and its association with machine- and rock-related factors and workers' individual characteristics. Methods: The study population included 28 drill machine operators who had worked in four opencast iron ore mines in eastern India. The study protocol comprised the following: measurements of WBV exposure [frequency weighted root mean square (RMS) acceleration ($m/s^2$)], machine-related data (manufacturer of machine, age of machine, seat height, thickness, and rest height) collected from mine management offices, measurements of rock hardness, uniaxial compressive strength and density, and workers' characteristics via face-to-face interviews. Results: More than 90% of the operators were exposed to a higher level WBV than the ISO upper limit and only 3.6% between the lower and upper limits, mainly in the vertical axis. Bivariate correlations revealed that potential predictors of total WBV exposure were: machine manufacturer (r = 0.453, p = 0.015), age of drill (r = 0.533, p = 0.003), and hardness of rock (r = 0.561, p = 0.002). The stepwise multiple regression model revealed that the potential predictors are age of operator (regression coefficient ${\beta}=-0.052$, standard error SE = 0.023), manufacturer (${\beta}=1.093$, SE = 0.227), rock hardness (${\beta}=0.045$, SE = 0.018), uniaxial compressive strength (${\beta}=0.027$, SE = 0.009), and density (${\beta}=-1.135$, SE = 0.235). Conclusion: Prevention should include using appropriate machines to handle rock hardness, rock uniaxial compressive strength and density, and seat improvement using ergonomic approaches such as including a suspension system.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.289-294
• /
• 2015

Background: The type of payment is one of the important factors that has an effect on the health of employees, as a basic working condition. In the conventional research field of occupational safety and health, only the physical, chemical, biological, and ergonomic factors are treated as the main hazardous factors. Managerial factors and basic working conditions such as working hours and the type of payment are neglected. This paper aimed to investigate the association of the type of payment and the exposure to the various hazardous factors as an heuristic study. Methods: The third Korean Working Conditions Survey (KWCS) by the Occupational Safety and Health Research Institute in 2011 was used for this study. Among the total sample of 50,032 economically active persons, 34,788 employees were considered for analysis. This study examined the relation between the three types of payment such as basic fixed salary and wage, piece rate, and extra payment for bad and dangerous working conditions and exposure to hazardous factors like vibration, noise, temperature, chemical contact, and working at very high speeds. Multivariate regression analysis was used to measure the effect of the type of payment on working hours exposed to hazards. Results: The result showed that the proportion of employees with a basic fixed salary was 94.5%, the proportion with piece rates was 38.6%, and the proportion who received extra payment for hazardous working conditions was 11.7%. Conclusion: The piece rate was associated with exposure to working with tight deadlines and stressful jobs. This study had some limitations because KWCS was a cross-sectional survey.