• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.52-52
• /
• 2010

선박건조에 있어서 대형 블록의 조립이 이루어지는 선행 탑재 및 탑재 단계에서 Tank Top과 Upper Deck의 V 개선 용접은 FCAW+SAW의 복합용접이 실시되고 있다. 그러나 가장 범용적 모재 두께인 18~20t의 경우 SAW 시공에만 약 5~6Pass가 소요됨으로써 다급한 진수 일정에 많은 지장을 초래하고 있다. 또한 능률 향상을 목적으로 용착량 증가효과를 얻기 위해 철분말이나 절선와이어를 개선면내에 충진하고 용접을 수행하나 획기적인 용접능률을 기대하기 어렵고 용접사 기량에 따라 용접 결함이 발생될 수 있다. 이에 따라 용접패스 수를 줄이고 결함 발생이 없는 용접기법 개발이 절실히 필요하였다. 이를 위해 매우 간단하고 효율적인 위빙장치를 제작하여 선탑/탑재 아래보기 용접이음에 1~2패스의 SAW 용접법을 개발하여 용접생산성은 물론 용접품질까지 획기적으로 향상시키는 기술 개발을 완료하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제13권2호
• /
• pp.45-52
• /
• 2007

Hospital Architectures in Korea are continuously erected to old-fashioned design, such as a large self-sufficient, but cost-inefficient hospital, in spite of rapidly changing social and healthcare environment. However, changes are slowly coming from inside of itself. This paper analyzed block plans of 7 best Korean hospitals which constructed in recent 20 years in aspects of the purpose of erection, departmental composition, areal composition, mass design and functional zoning of block plans and then, presented the directions of new design trends of hospital architecture in Korea. It is anticipated that hospital architecture will change immensely in the enlarging process of these minor changes.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.120-125
• /
• 2012

Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.373-381
• /
• 2002

프리캐스트 프리스트레스트 콘크리트 보의 크기와 자중은 그 운송과 조립에 드는 비용을 결정한다. 본 연구에서는 단면 최적화에 의하여 휨 응력의 구속을 받는 단면의 크기와 초기 긴장력의 크기 등을 결정하여 부재의 자중을 최소화하여 운송 및 시공의 편리성을 극대화하려한다. 프리캐스트 부재는 각 시공단계별 강도, 처짐, 그리고 부재 상, 하단에서 응력검토가 필요하다. 각 단계별 응력 제한치를 만족하는 최소자중 프리캐스트 U형보를 최적설계에 의하여 제안하였다. 최적설계에 의해 제안된 U형보는 기존의 직사각형 단면보다 39~50%까지의 자중감축이 가능할 것으로 예상된다. 본 연구에서 두 개의 대표적인 실물크기 U형보를 실험하였다. 이 실험에서 U형보는 설계하중과 공칭강도를 상회하는 휨강도에서 종국 파괴되었다.

• 한국건축시공학회지
• /
• 제24권4호
• /
• pp.495-506
• /
• 2024

PC공동주택은 RC공사와 달리 양중장비에 의한 작업이 주공정으로 공기가 산정되기 때문에 PC벽체를 포함한 양중 단위공정분석이 선행되어야 한다. 본 연구는 Core, 내부, 외부 PC벽체의 조립공정을 분석하여 PC공동주택 기준층 공사 Cycle 분석하는 것이다. 각 PC벽체의 양중과정 및 시간을 도출하였고, 그 결과를 사례에 적용하여 기준층 골조공사의 양중 사이클을 분석하였다. 순수 부재설치 기간은 5일로 분석되었고, PC부재별 작업시간 비중은 Core PC벽체는 약 16%, 내부 PC벽체는 약 8%, 외부 PC벽체는 약 18%로 분석되었다. 본 연구의 결과는 PC벽체가 적용된 PC공동주택 골조공사 시공계획 시, 핵심자료로 활용될 것이다.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.297-305
• /
• 2018

In a shipyard, block lifting is an important process in the production of ships and offshore structures. Block lifting is a sensitive process because lifting blocks have to be erected with exact positions and orientations. If we use a numerical method for the process, it is important to find tensions of wires and positions of equalizers to maintain the initial equilibrium position of the block. At this time, equations of motion of the block should be solved to calculate the initial equilibrium position of the block. Because the solving technique changes according to the number of equalizers, a suitable equation for the corresponding problem is required. In this study, three types of equations are proposed to find the initial equilibrium position of the block according to the number of equalizers. The Newton-Raphson's method is used to solve nonlinear simultaneous equations and the optimization method is used to determine the appropriate solution to the undetermined problem. To evaluate the applicability of the proposed methods, the dynamic simulations are performed using the tensions calculated from the proposed methods, and the results are discussed. The results show that the proposed methods can be effectively used to determine initial equilibrium position of the block for the block lifting.

• 한국실내디자인학회논문집
• /
• 제36호
• /
• pp.14-21
• /
• 2003

The Propose of this research was to consider how the New Media Architecture was applied to contemporary architecture according to the analysis of the design method process of Toyo Ito. Sendai Mediatheque by Toyo Ito stands as one of the most symbolic statement In New Media architecture. The four principal architectural elements of the Mediatheque are the digital image, the continuous space, the tube, and the skin facade. The digital image express forms of communication, person-to-person and person-to-thing, and they vary according to the media utilized on each level. The three skin elements of the Mediatheque are a double skin of MPG, skin of louvers, skin of fine-floor decking. The tubes act as columns while enveloping light, air, water, electricity the passage of people, as well as the means of transferring material. The thirteen tubes of different sizes prevent the erection of wall and suggest places instead of rooms. Instead of being limited to certain specified actions in clearly defined rooms, people are free to choose places for their actions in the continuous space.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.510-520
• /
• 2014

Unlike other mass production in small variety, shipbuilding process is a project-based method in single variety, which causes unpredictable volatility in the planning system. In shipyards, series of manufacturing processes from fabrication to erection is sequentially carried out. In order to predict unfavorable changes such as overload or low load of working volume, computerized simulation has been being gradually adopted. The data used in the simulation are processed from the database of the main scheduling and planning system. Thus the quality of those data is very crucial for the meaningful results. Unfortunately, research on the verification of data quality is very rare and hardly known to the authors. In this work, using the database of scheduling and product information system of a large domestic shipyard, the data required for the simulation are qualitatively analyzed and verified.

• 산업공학
• /
• 제15권3호
• /
• pp.230-240
• /
• 2002

Information technologies centered on the internet in the area of shipbuilding and marine engineering further incur the needs to increase the flexibility of the organization, the dispersion of work process, and the use of out sourcing, as well as the globalization of related market. In near future, electronic commerce and concurrent engineering based on CALS/EC and the Internet will be an integral part of the environment and upon these changes, ship design and construction will become a computer supported cooperative work of many dispersed and specialized groups. As the means of active response to these environmental changes, many new concepts such as digital shipbuilding, virtual shipyard, and simulation based design are appearing. In this paper, the concept and current status of digital manufacturing in general manufacturing industry will be reviewed. Then, related technologies, area of application and methods of digital manufacturing in shipbuilding and marine industries are presented. In addition, virtual assembly simulation system for shipbuilding(VASSS), a tool for crane operability and block erection simulation in virtual dock based on 3D product model, will be introduced.