• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.113-120
• /
• 2021

The wave-propagation phenomenon in an infinite medium has been used to describe the physics in many fields of engineering and natural science. Analytical or numerical methods have been developed to obtain solutions to problems related to the wave-propagation phenomenon. Energy radiation into infinite regions must be accurately considered for accurate solutions to these problems; hence, various numerical and mechanical models as well as boundary conditions have been developed. This paper proposes a new boundary condition that can be applied to scalar-wave or horizontally-polarized shear-wave (or SH-wave) propagation problems in layered waveguides. A governing equation is obtained for the SH waves by applying finite-element discretization in the vertical direction of the waveguide and subsequently modified to derive the boundary condition for the infinite region of the waveguide. Using the orthogonality of the eigenmodes for the SH waves in a layered waveguide, the new boundary condition is shown to be equivalent to the existing root-finding absorbing boundary condition; further, the accuracy is shown to increase with the degree of the new boundary condition, and its stability can be proven. The accuracy and stability are then demonstrated by applying the proposed boundary condition to wave-propagation problems in layered waveguides.

• Journal of Digital Convergence
• /
• v.19 no.6
• /
• pp.399-408
• /
• 2021

The purpose of this study was to determine the effects of simulation-based practice and clinical practice on nursing students' critical thinking disposition and nursing process confidence. This study is a quasi-experimental design using the non-equivalent control group pretest-posttest only design, targeting 103, 4th grade(51=control group, 52=experimental group) in the Department of Nursing at D University. The collected data were analyzed using the SPSS/WIN 23.0 program, and the main research results are as follows. Students who experienced simulation-based practice showed significant improvement in critical thinking tendencies(t=-3.28, p=.001) compared to those who experienced clinical practice. There was no significant difference in nursing process confidence (t=-1.78, p=.079), but it was significantly higher in actual application, collaborative contsistency, and nursing contsistency. As a result, There were no significant difference in some, but it was contfirmed that simulation-based practice improved the critical thinking disposition and nursing process confidence in of nursing students. In addition to clinical practice, it is considered necessary to study simulation-based practice using repetitive practice and standardized patients in a free simulation practice environment.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study was to explore the regulations and operational problems of on-board training, and to investigate and analyze the satisfaction level of consignment on-board training among students who completed their training at Korea Maritime & Ocean University. In terms of satisfaction differences by gender, female students generally had a higher relative satisfaction level than male students. The different types of satisfaction in the navigation and engineering categories, the overall practical effect and satisfaction level of the training records shows that the satisfaction level of the trainee is much lower than that of the trainee, so relevant educational institutions and shipping companies need to take measures to improve the satisfaction level of this part. The most important part of the comprehensive company evaluation completed by trainees asked whether they thought the training was equivalent in labor to the employees. Results suggest shipping companies must make a clear distinction between employees and trainees, while establishing relevant internal procedures so that the on-board training process can be carried out in accordance with the purpose of the on-board training consignment.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1678-1686
• /
• 2020

This study attempted to derive the possibility of using wood pellet using rice husk, which is an agricultural byproduct, and tried to improve the lower calorific value of rice hulls thorough expansion technology and combustion additives. In the physical and chemical analysis of rice husk, the result was obtained that the chlorine content was 0.09%, which did not meet the wood pellet quality standard of Korea. When making rice hulls into expanded rice husk through the expansion technology, the chlorine content decreased, resulting in a product of 0.02%, which is equivalent to the wood pellet standard of Korea, and the calorific value was also increased to 4,280 kcal/kg compared to the existing 3,780 kcal/kg. To obtain a product of 5,000 kcal/kg or more, borax, hydrogen peroxide, and sodium hydroxide was used as combustion improver. However the improvement in calorific value was insufficient. After conversion to coffee oil path using coffee grounds, which is a waste resource biomass, it is mixed into an expanded rice husk, and when the product is analyzed, the coffee oil 15 wt% mixed product shows an excess of 4,949 kcal/kg. When using rice husk, an agricultural byproduct, as wood pellets, it is considered desirable to use waste resources to improve the calorific value, and according to the results of this study, when mixing coffee oil, rice husk can be sufficiently used as wooden pellets.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2021

In this paper, a multi-scale finite element (FE) modeling methodology for three-dimensional (3D) needle-punched (NP) C/SiC with a complex microstructure is presented. The variations of the material properties induced by the needle-punching process and complex geometrical features could pose challenges when estimating the material behavior. For considering these features of composites, a 3D microscopic FE approach is introduced based on micro-CT technology to produce a 3D high fidelity FE model. The image processing techniques of micro-CT are utilized to generate discrete-gray images and reconstruct the high fidelity model. Furthermore, a subcell modeling technique is developed for the 3D NP C/SiC based on the high fidelity FE model to expand to the macro-scale structural problem. A numerical homogenization approach under periodic boundary conditions (PBCs) is employed to estimate the equivalent behavior of the high fidelity model and effective properties of subcell components, considering geometry continuity effects. For verification, proposed models compare excellently with experimental results for the mechanical behavior of tensile, shear, and bending under static loading conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.131-141
• /
• 2020

The purpose of this study is to compare the effects on nursing students' knowledge, performance confidence, and skills from combined virtual IV simulator and mannequin arm IV cannulation training against training with a mannequin arm only. A non-equivalent control group pretest-posttest experimental study was carried out. Ninety-three sophomore nursing students who were just beginning their fundamental skills training were recruited. Participants were divided into two groups (46 for the combined group and 47 for the mannequin-only group). Data were collected from March 18-29. For the experimental group, both virtual IV simulator and mannequin-arm training were provided for 30 minutes (15 minutes each). For the control group, training for 30 minutes with a mannequin arm only was provided. After intervention, there was no statistically significant difference in the knowledge score between the two groups (F=2.52, p=.116). However, there was a significant improvement in performance confidence (t=2.14, p=.035) and nursing skills (t=5.34, p<.001) in the experimental group, compared with the control. Overall, this study provides empirical evidence that the combination of virtual IV simulator and mannequin arm training may further enhance nursing students' performance confidence and nursing skills.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.303-310
• /
• 2020

The cultivation of Sparassis crispa in the beginning of the 2000s in South Korea, and the cultivar 'Neowul' bred in the Chonbuk Agricultural Research and Extension Service were registered first in 2016. However, there is no manual for the cultivation of Sparassis crispa, and therefore, there remains a big difference in its harvest rate across farms. Herein, we aimed to study the primordium formation conditions of Sparassis crispa 'Neowul' according to the medium pH, medium moisture content, and inoculum volume of liquid spawn and develop a stable production technology. We found the annual yield per bottle relating to the cultivation period, harvest rate, and the weight of fruiting body to be the highest at 363.6 g in the area cultivated at pH 3.8. However, it is thought that cultivation by adjusting the pH to 3.9±1 would be necessary for stable production, considering that at pH 3.6, the yield sharply reduced to 189.5 g. Moreover, the culture period was shorter at pH 4.0 compared with that at pH3.8, and the cultivation period at pH 4.0 was the same as that at pH 3.8. No significant difference in the weight of the fruiting body at different conditions was recognized. Additionally, it is difficult to regulate the pH precisely in practical applications in the farms. It is thought that 341.8 g Sparassis crispa will be produced per bottle annually if the medium moisture content is adjusted to 65%, liquid spawn inoculum volume is equivalent to 4% of the medium volume, and the humidity in the culture room is set to below 50%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.200-210
• /
• 2020

The maintenance of educational facilities was assembled in 12 project classifications of the Educational Improvement Program. The priorities were decided by the evaluation scores derived from the condition investigation, and maintenance works were budgeted in the order of priorities. These priorities were a schedule for conducting maintenance and an important criterion for obtaining a construction order. Several restrictions in the condition investigation exist, which derives budgets and conducts maintenance separately based on the priorities. An educational facility manager has a restriction in quantity take-off, which results in an incorrect budget. Discomfort would occur in an educational environment, and a period of infringing safety would increase. This study proposes applying a BIM in the condition investigation and the planning framework for work-type packaging. A BIM supports a budget calculation and derives evaluation scores by linking a repair and an inspection result. The work-type packaging algorithm divides a budget allocation range and derives the result of a grouped work-types applied in an equivalent space and element. As a result of applying cases, it could shorten the duration by approximately 37.4%. Its usability in selecting a grouped work-type was evaluated through an assessment with workers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.329-337
• /
• 2020

In this study, Rubus idaeus (Raspberry) cultivar 'Willamette' fruit extract(RIFE) was prepared from the freeze-dried raspberry powder, n-hexane and ethyl acetate, and then the phenolic compound content, ferric reducing ability, and radical scavenging ability were measured. The raspberry cultivar 'willamette', 'polka', and 'polana' compound fruit extract did not show cytotoxicity up to the concentration of 10%. As a result of conducting an experiment at the concentration, it was confirmed that the total phenolic compound content was 375.3 ppm, and the total flavonoid content was 43.46 ppm, and the ferric reducing ability by ferric reducing antioxidant power (FRAP) reagent was equivalent to FeSO4 0.532 mM. It was confirmed that 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability was 94.5 ± 0.7%, and the 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging ability was 99.4 ± 2.82%, and the nitric oxide (NO) radical scavenging activity was 88.5 ± 0.4%. When compared with the L-ascorbic acid 'standard' solution, DPPH radical scavenging ability was between 25 - 50 ppm / ABTS radical scavenging ability was close to 100 ppm / NO radical scavenging ability was more than 1,000 ppm. These results suggest that the raspberry cultivar 'willamette' fruit extract could be applied as an effective cosmetic material with antioxidant activity.

• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.270-288
• /
• 2021

We proposed a numerical method to simulate the hydro-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) in the paper. As a part of DECOVALEX-2023 Task G, we verified the method via benchmarks with analytical solutions. DECOVALEX-2023 Task G aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as a group of tetrahedral grains and calculated the interaction of the grains and their interfaces using 3DEC. The micro-parameters of the grains and interfaces were determined by a new methodology based on an equivalent continuum approach. In benchmark modeling, a single fracture embedded in the rock was examined for the effects of fracture inclination and roughness, the boundary stress condition and the applied pressure. The simulation results showed that the developed numerical model reasonably reproduced the fracture slip induced by boundary stress condition, the fracture opening induced by fluid injection, the stress distribution variation with fracture inclination, and the fracture roughness effect. In addition, the fracture displacements associated with the opening and slip showed good agreement with the analytical solutions. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.