• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.55-61
• /
• 2020

The communication issues expected for SMEs are that 1) IT systems are not easy to connect, 2) data collection and integration by heterogeneous systems are difficult, and 3) various fieldbuses and protocols make interfaces difficult. Usually, SMEs often have automation built before the introduction of smart factories. It is necessary to provide communication technology such as Sensing to meet the heterogeneous system level with the old aged sensors in the automation equipment and communication network of SMEs. We will consider how to improve the network interface before applying the latest network technology at the time of preparation using PI.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.155-160
• /
• 2014

Purpose: The purposes of this study were to develop a workstation computer that allowed intraoperative touchless control of diagnostic and surgical images by a surgeon, and to report the preliminary experience with the use of the system in a series of cases in which dental surgery was performed. Materials and Methods: A custom workstation with a new motion sensing input device (Leap Motion) was set up in order to use a natural user interface (NUI) to manipulate the imaging software by hand gestures. The system allowed intraoperative touchless control of the surgical images. Results: For the first time in the literature, an NUI system was used for a pilot study during 11 dental surgery procedures including tooth extractions, dental implant placements, and guided bone regeneration. No complications were reported. The system performed very well and was very useful. Conclusion: The proposed system fulfilled the objective of providing touchless access and control of the system of images and a three-dimensional surgical plan, thus allowing the maintenance of sterile conditions. The interaction between surgical staff, under sterile conditions, and computer equipment has been a key issue. The solution with an NUI with touchless control of the images seems to be closer to an ideal. The cost of the sensor system is quite low; this could facilitate its incorporation into the practice of routine dental surgery. This technology has enormous potential in dental surgery and other healthcare specialties.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.143-150
• /
• 2017

In this paper, we propose a novel motion recognition platform using smart-phone tracking and color communication. The interface requires only a camera and a personal smart-phone to provide a motion control interface rather than expensive equipment. The platform recognizes the user's gestures by the tracking 3D distance and the rotation angle of the smart-phone, which acts essentially as a motion controller in the user's hand. Also, a color coded communication method using RGB color combinations is included within the interface. Users can conveniently send or receive any text data through this function, and the data can be transferred continuously even while the user is performing gestures. We present the result that implementation of viable contents based on the proposed motion recognition platform.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.26-33
• /
• 2009

New equipment that is useful for driving is developing every day. Navigation is one of the most popular equipment among them. Telematics market including navigation is getting bigger and bigger. However, traffic accident from using telematics equipment is also increasing. Drivers may lose glance using navigation, and driver's workload will also grow by driver's distraction. This thesis is base on the study about the influence on the drivers' workload by using the telematics equipment. Previous study of drivers' workload used psychological method and behavior test method, but it was less connection with telematics equipment. The main object of this thesis is measuring the workload according to the telematics usage by HMI (Human Machine Interface) in the virtual reality. Therefore, we developed GPS simulator, and made an experiment of whether using the navigation or not on the highway and an experiment of the location of navigation in downtown. The result of these experiments is that workload when driver used navigation was higher than when driver didn't use navigation. In addition, workload was different according to the location, and HUD (Head-Up Display) was especially higher than other locations but also its information delivery ability was the best.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.79-86
• /
• 2015

This research proposed a design direction for the ambulance interior storage space based on the placement and access to the equipment to facilitate an emergency medical practice taking into account the safety and efficiency by the emergency medical technician ergonomic factors. Therefore, through a field survey for the current derivation of the storage space problem 'placement', 'enable', 'management' like these three items resulting clarity, accessibility, simplicity and functionality of the four functional elements by targeting ambulances in operation in this country. First, there is a need to improve standardized of cabinet sizes fit to loaded meet emergency equipment standards. Currently, the equipment designed to use a simple storage cabinet has had problems in the usability. Second, it must be located in the continuous exposure in progress to the user's traffic line. Third, the problem was the insufficient function of the cabinet to ensure the safety of patients by paramedics from the emergency rescue equipment and due to the leaning of the ambulance driving. Besides, it was pointed out that in addition to the proposed alternatives, including the agenda, states that safety belt replacement equipment, emergency personnel and patients with the handle of a guardian for the efficient use storage space within the 119 ambulance. However, in the present study suggest that there is a state proceeds mainly limited usability in the field, having been installed.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this research, we develop an airborne equipment radiating S/C-band signal to a target located at a long distance. RF interface of the equipment comprises band-specific transmitters and an broadband antenna to satisfy EIRP(effective isotropic radiated power) requirements. The equipment is in a shape of a POD like an aircraft fuel tank. The measured weight of the equipment is 119.8 kg, the CG(center of gravity) is 1391.35 mm and the MOI(moment of inertia) are 46.07 ± 0.05(I_yy) kg·㎡, 45.36 ± 0.09(I_zz) kg·㎡. All results are found to meet the requirements for aircraft installation. To verify flight safety, EMI(electromagnetic interference) tests (RE102, CE102), environmental tests (high/low temperature operation, altitude), intra-system EMC(electromagnetic compatibility) and HERP(hazards electromagnetic radiation personnel) tests have been conducted and all the test results met the requirements. It is confirmed that the equipment could be mounted on the aircraft by meeting all electrical and mechanical requirements.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.151-159
• /
• 2007

It is very important to collect all production-related status values during the manufacturing process of semiconductor. The analysis results of the collected data can be used for the operation rate, fault diagnosis, process control and removal of predicted obstacles of equipments, eventually contributing to the improvement of production efficiency. For this propose. many IC makers have adopted EES(Equipment Engineering System). As the use of web has become a daily lift activity lately, it has been suggested to expand the scope of monitoring equipments using HTTP or SOAP protocols. To fulfill the web-based EES, EDA(Equipment Data Aquisition) should be facilitated first by integrating and standardizing various forms of messages generated from many different semiconductor equipments. In this paper, a method for integration between different types of information is suggested based on the analysis of various protocols used for the communication between semiconductor equipments. In addition, a software architecture to support the method is desisted.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.396-405
• /
• 2009

An interlocking equipment of railway signalling systems should have very high functional safety and reliability properties because of its vital railway protection functionality. In order to achieve the required safety and reliability level, an engineer, in general, designs and implements the interlocking equipment to operate under RTOS(Realtime Operating System) environment, and the control hardware architecture redundant to cope with the random failures of system or subsystem. In such an architecture, it's very difficult to implement the interlocking equipment to communicate with various interface systems including the signal operator's terminal. In this paper, we propose a dual ethernet network topology and dual packet seamless transfer protocol algorithm for railway signaling system such as the interlocking equipment. We verify in this paper that the proposed DPST protocol algorithm has the evidence of its robust properties against the random hardware faults and communication errors. The proposed communication structure and algorithm is implemented in the electronic interlocking equipment for the private railway system of Hyundai Steel Company and its performance and properties are validated on the guideline of European Railway Standard EN50159.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.72-73
• /
• 2021

As discussions of the International Maritime Organization for the introduction of the Marine Autonomous Surface Ship (MASS) began in earnest, discussions were conducted to prioritize cybersecurity (Cyber Risk Management) when developing a system to support MASS operation at the 27th ENAV Committee Working Group (WG2). Korea launched a technology development project for autonomous ships in 2020, and has been promoting detailed tasks for cybersecurity technology development since 2021. MASS operation in a digital maritime communication system environment requires network security of various digital equipment that was not considered in the existing maritime communication environment. This study introduces the basic concept of network security equipment to support MASS operation in the detailed task of cybersecurity technology development, and defines the network security equipment interface for MASS ship application in the basic stage.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.19-22
• /
• 2002

In this paper, we aims to develop a microcontroll er-based ECG monitoring system and portable pulse oximeter using Compact Flash Interface. First, portable pulse oximeter system is designed to record 2 channel of biosignals simultaneously, including 1 channel of $SpO_2$ and 1 channel of pulse rate. It is very small and portable. Besides, the system makes it possible to measure a patient's condition without an additional medical equipment. We tried to solve the problems generated by a patient's motion. That is, we added an analog circuit to a traditional pulse oximeter in order to eliminate the change of the base line. And we used 2D sector algorithm. As present, SpO2 modules are completed. But there are still many further development needed in order to enhance the function. Especially, compact falsh interface remains the most to complete. Second, ECG monitoring system uses almost same as present 3-lead ECG system. But we focus on the analog part, especially in filter. The proposed filter is composed of two parts. One is a filter to remove the power-line interface. The other is a filter to remove the baseline drift. A filter to remove the power-line and the baseline drift is necessarily used in the ECG system. The implemented filter have three features; minimizing the distortion in DC component, removing the harmonic component of power-line frequency. Using compact flash interface, we can easily transfer a patient's personal information and the measured signal data to a network based server environment. That means, it is possible to implement a patient's monitoring system with low cost.