• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.651-654
• /
• 1999

This paper investigates the varying characteristics of the performance degradation resulting from the different combination of wordlength in fixed-point implementation of recursive sinusoidal transform. The performance degradation is analytically derived in the form of noise-to-signal power ratio. The best wordlength combination is shown to be the equal length distribution of the given number of bits between the transform coefficients and the data. The analysis results are also verified through the computer simulations.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.20-25
• /
• 2007

The performance of air-to-air heat exchanger has been investigated with rotating porous plates newly developed in this study. With an equal interval of 18 mm, the rotating porous plates are installed inside the heat exchanger where the hot and cold airs enter at opposite ends. When flowing in opposite directions by the separating plate installed in the center of the rotating porous plates, the airs give and receive the heat each other. Dry bulb temperature is set by adjusting heat supply at heater. In order to measure the temperature distribution of the hot air side inside heat exchanger, the thermocouples are inserted between the plates. The first location of thermocouple is 10mm downstream from the inlet of heat exchanger, and succeeding ten locations are aligned at an equal interval of 18mm. From the experiment of air-to-air heat exchanger with the rotating porous plates, the heat transfer rate increased as both air flow rate and RPM of the rotating porous plate increased. It was found that the overall heat transfer coefficient increased with the increase in RPM of porous plate at the conditions of the same air flow rate.

• 응용통계연구
• /
• 제8권2호
• /
• pp.87-97
• /
• 1995

$2 \times 2$ 요인계획법에서 주효과가 전혀 존재하지 않거나 단지 하나만이 존재하는 경우의 교호작용을 위한 일반적인 F 검정과 순위변환을 이용한 F 검정 (FR 검정)의 제1종 오류율과 검정력은 전반적으로 비슷한 수준이나 정규분포보다는 지수분포하에서의 FR 검정의 검정력이 상당히 높은 수준임을 알 수 있다. 반면에 주효과들이 모두 존재하는 경우의 FR 검정의 제1종 오류율은 F 검정에 비하여 효과의 크기가 증가할수록 감소하고 주효과의 구성방법에도 영향을 받으며, 검정력은 효과의 크기와 표본의 크기를 크게할수록 증가하되 FR 검정의 검정력은 F 검정에 비하여 낮은 수준이며 주효과의 구성방법 및 모집단의 분포형태에 따라 민감하게 변화함을 알 수 있다.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.197-205
• /
• 1994

Security of a power system refers to its robustness relative to a set of imminent disturbances (contingencies) during operation. The socially optimal solution for the actuall level of generation/consumption has been well-known spot pricing at shot-run marginal cost. The main disadvantage of this approach arises because serious contingencies occur quite infrequently. Thus by establishing contractual obligations for contingency offering before an actual operation time through decision feedback we can obtain socially optimal level of system security. Under probabilistic precontract pricing the operating point is established at equal incremental cost of the expected short-run and collapse cost of each participant. Rates for power generation/consumption and for an offer to use during a contingency, as well as information on the probability distribution of contingency need for each participant, are derived so that individual optimization will lead to the socially optimal solution in which system security is optimized and the aggregate benefit is maxmized.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권1호
• /
• pp.16-21
• /
• 1999

The analysis of distribution line faults is essential to the proper protections of the power system. A high impedance fault test, which was carried in Korean electric power systems, it was found that a arcing phenomenon occurred during the high level portion of conductor voltage in each cycle. In this paper, we propose a new method for detection of high impedance faults, which uses the arcing fault current difference during high voltage and low voltage portion of conductor voltage waveform. To extract this difference, we diveded one cycle fault current into equal spanned four data windows according to the magnitude of voltage waveform and applied fast fourier transform(FFT) to each data window. The frequency spectrum of current wavefrom in each portion are used as the inputs of neural network and is trained to detect high impedance faults. The proposed method shows improved accuracy when applied to staged fault data and fault-like load.

• 한국가스학회지
• /
• 제23권3호
• /
• pp.27-32
• /
• 2019

본 연구에서는 단일 원관에서 입구의 유속이 일정한 경우와 주기적인 변동이 있는 경우에 대하여 시간에 따라 원관 주위에서 와류 분포와 온도 분포 변화를 비교 분석하였다. 또한, 양력과 항력의 시간 변화와 PSD(power spectral density)를 분석하여 유동의 주파수 특성을 규명하였다. 일정 입구 유속의 경우는 잘 알려진 칼만 와류 분포를 보여 주었으며 원관의 상하에서 교대로 와류가 발생하는 것을 관찰할 수 있었다. 주기적인 입구 유속 변동의 경우는 원관의 상하에서 동시에 와류가 발생하는 것을 관찰할 수 있었다. 두 가지 모두 시간에 따른 온도 분포 변화는 와류 분포 변화와 거의 유사하게 거동하는 것을 확인할 수 있었다. 일정 입구 유속의 경우의 와류 유동 주파수는 31.15 Hz 이며 주기적인 입구 유속의 경우는 와류 유동 주파수는 입구 유속의 주파수와 동일하게 15.57 Hz으로 나타났다. 원관 표면 평균 누셀수는 일정 입구 유속의 경우는 99.6이며 주기적인 입구 유속 변동의 경우는 110.7로 나타나서 주기적인 입구 속도 변동의 경우가 열전달이 11.1% 증가하는 것을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.537-540
• /
• 2000

The Distribution System consist of many tie-line switches and sectionalizing switches, operated a radial type. When an outage occurs in Distribution System, outage areas are isolated by system switches, has to restored as soon as possible. At this time, system operator have to get a information about network topology for service restoration of outage areas. Therefore, the searching result of restorative topology has to fast computation time and reliable result topology for to restore a electric service to outage areas, equal to optimal switching operation problem. So, the problem can be defined as combinatorial optimization problem. The service restoration problem is so important problem which have outage area minimization, outage loss minimization. Many researcher is applying to the service restoration problem with various techniques. In this paper, advanced Dijkstra algorithm is applied to searching a restoration topology, is so efficient to searching a shortest path in graph type network. Additionally, fuzzy rules and operator are applied to overcome a fuzziness of correlation with input data. The present technique has superior results which are fast computation time and searching results than previous researches, demonstrated by example distribution model system which has 3 feeders, 26 buses. For a application capability to real distribution system, additionally demonstrated by real distribution system of KEPCO(Korea Electric Power Corporation) which has 8 feeders and 140 buses.

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.448-455
• /
• 2015

A model predictive control (MPC) method without individual PWM has been recently researched to simplify and improve the control flexibility of a multilevel inverter. However, the input power of each H-bridge cell and the switching frequency of switching devices are unbalanced because of the use of a restricted switching state in the MPC method. This paper proposes a control method for balancing the switching patterns and cell power supplied from each isolated dc source of a cascaded H-bridge inverter. The supplied dc power from isolated dc sources of each H-bridge cells is balanced with the proposed cell balancing method. In addition, the switching frequency of each switching device of the CHB inverter becomes equal. A simulation and experimental results are presented with nine-level and five-level three-phase CHB inverter to validate the proposed balancing method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.285-288
• /
• 2000

This paper presents a technique for contingency ranting using line capacity calculation method and outage distribution factors(LODF) which are established by generation shift distribution factors from DC load flow solutions. By using the LODF, the line flow can be calculated a ccording to the modification of base load flow if the contingency occur. To obtain contingency ranting, maximum power tansferred to the load is obtained when load impedance $Z_r$ equal to line impedance $Z_s$. ( $Z_r$/ $Z_s$=1) The proposed algorithm has been validated in tests on a 6-bus test system.