• The monthly packaging world
• /
• s.222
• /
• pp.110-121
• /
• 2011

환경부는 생산자책임재활용제도(EPR)의 성공적 운영을 위해 의무생산자의 재활용의무이행방법(직접, 개별위탁, 공제조합)을 개선하고 재활용 이행에 있어 회수 의무를 분명히 하며 재활용사업공제조합을 복수화하되 소규모 조합 난립을 막기 위해 조합 인가 및 취소 요건을 규정하고 포장재 분야 공제조합은 통합하는 등 조합 설립형태를 합리적으로 개선하고 재활용지원금 차등지원 근거 마련 등 조합 운영방식을 효율적으로 개선하려는 취지 아래 자원의 절약과 재활용 촉진에 관한 법률을 일부 개정했다. 이번 개정안에서는 또한 그 밖에 현행 제도 운영과정에서 나타난 미비점을 개선 보완하고자 했다. 본 고에서는 주요 내용 및 변경된 법안을 살펴보도록 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.117-119
• /
• 1998

대용량의 데이터를 다루는 지리정보 시스템은 I/O가 시스템의 병목현상을 발생시킨다. 따라서, I/O의 병렬화로 GIS의 데이터 요구를 만족시키려는 연구가 이루어져 왔다. PR(Parallel R-tree)[1]도 이러한 연구에 속한다. 한편, 지리 정보 시스템의 질의는 영역질의가 대부분이다. 영역질의는 특성상 인접한 객체들의 동시에 요구한다. 그러므로, 인접한 데이터를 물리적으로 인접하게 배치하면 I/O의 성능이 향상된다. 본 논문에서는 인접한 객체를 물리적으로 인접한 위치에 저장하는 방식인 EPR(Enhanced PR)기법과 단말노드 구조를 제안하고 그 성능을 평가하였다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3069-3072
• /
• 2009

• Proceedings of the Korean Biophysical Society Conference
• /
• 1999.06a
• /
• pp.44-44
• /
• 1999

Yeast cytochrome c peroxidase (CcP) was cloned and overexpressed in E. coli, and purified by a Ni$^{2＋}$-affinity column. HoloCcP was obtained by reconstituting apoCcP with Mn$^{3+}$-protoporphyrin IX (MnPP). Electron paramagnetic resonance (EPR) spectra of spin-labeled holoCcP showed a slightly more immobilized signal than spin-labeled apoCcP.(omitted)

• The monthly packaging world
• /
• s.280
• /
• pp.44-57
• /
• 2016

(사)한국포장재재활용사업공제조합은 자원의 재활용 촉진 및 환경친화적이며 효율적인 재활용 촉진을 위하여 그와 관련한 연구 및 기술개발을 수행 또는 지원을 바탕으로, 재활용 산업을 육성 발전시킴으로써 환경보전과 국민의 삶의 질 향상에 기여하며 "자원의 절약과 재활용 촉진에 관한 법률 제16조 제1항"의 규정에 의한 제품 포장재의 제조 수입 판매업자의 재활용 의무를 대행함을 목적으로 설립된 단체이다. 조합 연구소는 지난 4월 2015 포장재 자원순환 연차보고서를 발표했다. 본 고에서는 EPR대상 포장재 재활용 의무량 및 실력과 함께 연도별 포장재 재질 구조 등급별 시장조사, 재활용 현황에 대해 살펴본다.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.324-327
• /
• 1998

The mechanisms of Cu2+ adsorption onto goethite, hematite and kaolinite are different. Goethite and hematite showed a similar adsorption behavior (ionic-strength independent), but kaolinite gave somewhat different result (ionic-strength dependent). These experimenal results were successfully simulated using a surface complexation model, TLM, which defines the inner- or outer-sphere complex. The chemical nature of Cu2+ adsorption onto kaolinite was qualitatively identified by EPR spectroscopy.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.80-87
• /
• 1985

Radiation damage in a single crystal of ammonium sulfate caused by ${\gamma}$-irradiation at room temperature has given rise to several paramagnetic centers. Electron spin resonance (ESR) spectra of crystal are obtained with the X-band EPR spectrometer at room temperature. An intense and isotropic peak of Gaussian shape at g = 2.0036 is assigned to $SO_3^-$, which shows power saturation effects. Angular dependence of spectra is studied for the rotations about three mutually perpendicular axes a, b and c. The g-values are obtained from the relative distances between isotropic peak of $SO_3^-$ and anisotropic peak of the species. Principal $g^-$values and direction cosines were calculated by diagonalizing the 3${\times}$3 matrix whose elements are the $g^-$values for each species. From the analysis of characteristic principal $g^-$values and direction cosines for ammonium sulfate single crystal, anisotropic peaks corresponding to $SO_4^-,\;SO_2^-$ and defect structure corresponding to electron excess type are identified.

• Corrosion Science and Technology
• /
• v.14 no.3
• /
• pp.120-126
• /
• 2015

The usage of bending products recently have increased since many industries such as automobile, aerospace, shipbuilding, and chemical plants need the application of pipings. Bending process is one of the inevitable steps to fabricate the facilities. Induction heat bending is composed of compressive bending process by local heating and cooling. This work focused on the effect of induction heat bending process on the properties of ASME SA312 Gr. TP304 stainless steel pipes. Tests were performed for base metal and bended area including extrados, intrados, crown up, and down parts. Microstructure was analyzed using an optical microscope and SEM. In order to determine intergranular corrosion resistance, Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test and ASTM A262 practice A and C tests were done. Every specimen revealed non-metallic inclusion free under the criteria of 1.5i of the standard and the induction heat bending process did not affect the non-metallic inclusion in the alloys. Also, all the bended specimens had finer grain size than ASTM grain size number 5 corresponding to the grain sizes of the base metal and thus the grain size of the pipe bended by induction heat bending process is acceptable. Hardness of transition start, bend, and transition end areas of ASME SA312 TP304 stainless steel was a little higher than that of base metal. Intergranular corrosion behavior was determined by ASTM A262 practice A and C and DL-EPR test, and respectively step structure, corrosion rate under 0.3 mm/y, and Degree of Sensitization (DOS) of 0.001~0.075% were obtained. That is, the induction heat bending process didn't affect the intergranular corrosion behavior of ASME SA312 TP304 stainless steel.

• Korean System Dynamics Review
• /
• v.9 no.2
• /
• pp.129-154
• /
• 2008

As a practical means to upgrade urban sustainability, this paper focuses on resource cyclical systems concerned with the waste of electric and electronic equipment (WEEE) in Korea. Borrowing System Dynamics concepts and approaches, it examines behavioral changes of WEEE dynamics to observe whether the existing management methods can be readjusted. The measurement is based upon both reuse and material and thermal recycle simulation works in the individual stage of WEEE discharge, collection, and treatment, going beyond the traditional recycle-only customs. This research estimates that the newly introduced Extended Producer Responsibility (EPR) system would definitely exert a significant impact on the final stage of WEEE treatment, decreasing the final treatment volume in the first half of the research period. The trend, nonetheless, would be reversed in the second half, mainly owing to the additional waste volume originated from the local government and recycling center. Sensitivity analysis poses, among others, that the local government-supported reuse center should take charge of a pivotal role in the long run. The research also shows that sufficientand necessary conditions for the WEEE management and treatment should be given to the combined efforts, both from the private sectors and the public domains. Based on these research findings, the paper recommends that key stakeholders including the producer and the public organizations should devise how to jointly carry out specific agenda centered around partnership or network buildings.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.28-36
• /
• 2006

The development of material separation technique for waste plastic recycling are the necessary situation restricted by law the reclamation and incineration of waste plastic after 2004, with enforcement of EPR (Extended Producer Responsibility) system. As the this study is the research on the development of electrostatic separation techniques for recycling of life circles waste plastic by development of charging material and charger, the separation efficiency can be improved. Therefore, we developed the charger and electrostatic separator to increase charging efficiency and material separation per object plastics, rising these equipments, we removed PVC up to $99\%$ from two kinds of mixed plastics. And in case of restricting PVC content such as PET, we developed the separation technique that can remove PVC up to $99.99\%$ from PET with PET recovery about $80\%$. Also, as we separated over $98\%$ for three kinds of mixed plastics, and then established material separation technique to increase recycling of plastic.