• 제목/요약/키워드: epr

검색결과 438건 처리시간 0.025초

Modeling study on repeat purchase intention on silk products based on the electronic commercial platform

  • Shi, Rui;Li, Gaihang;Liu, Guolian
    • 복식문화연구
    • /
    • 제20권6호
    • /
    • pp.937-941
    • /
    • 2012
  • Based on the literature on customer's repeat purchase intention, customer's repeat purchase intention was explored, customer's repeat purchase intention has been a crucial factor influencing consumer behaviors, In this research, the development of models on repeat purchase intention repurchase was indicated. Based on the electronic commerce platform, we focus on the customer's repeat purchase intention on silk products, This paper mainly explores the e-commerce purchase frequency (EPF), customer perceived value (CPV), perceived risk of e-commerce (EPR), and customer satisfaction (CS). The influence of the four factors on repeat purchase intention (RPI) is investigated. In the results, we found that CPV and CS have positive correlations with repeat purchase intention, The EPR has a negative correlation with RPI and has no significant influence on RPI. The result can provide meaningful suggestions for silk product retailers.

Constructing Overhauser Dynamic Nuclear Polarization-Nuclear Magnetic Resonance System Using Benchtop Electron Paramagnetic Resonance Spectrometer

  • Saun, Seung-Bo;Kim, JiWon;Han, Oc Hee
    • 한국자기공명학회논문지
    • /
    • 제22권2호
    • /
    • pp.34-39
    • /
    • 2018
  • The Nuclear Magnetic Resonance (NMR) technique using Dynamic Nuclear Polarization (DNP) procedures is one of the promising techniques that enable overcoming low sensitivity problems in NMR spectroscopy. We constructed an ODNP-NMR system using a commercial benchtop EPR spectrometer. The $^1H$ NMR peak area of water in aqueous solutions of 4-hydroxy-TEMPO was enhanced more than 95 times in the ODNP-NMR experiments. Our signal enhancement results were about 55% of the previously reported result. This could be due to non-uniform microwave power over a sample and unwanted sample heating by microwave. However, this portable ODNP-NMR spectrometer will be eventually useful for site-specific detection with nano-scale spatial resolutions and molecular dynamics studies with significantly improved signal sensitivity.

홍수피해발생 잠재위험성의 개념적 연구 (Conceptual Study for the Potential Risk of Flood Damage Occurence)

  • 박석근;김형수;이건행;윤용남
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회 논문집
    • /
    • pp.850-854
    • /
    • 2005
  • 본 연구에서는 홍수가 발생할 경우 그 피해에 대한 잠재위험도를 산정하는 방법론을 제시하고자 한다. 이를 위하여 대상유역의 연간 홍수피해 잠재위험도의 기대치를 나타내는 홍수피해 잠재위험 기대치(Expected Potential Risks of Flood Damage, EPR)라는 새로운 개념을 정의하고 이 개념을 이용해 잠재위험도를 산정하도록 한다. 우선 EPR을 선장하기 위한 요소로 대상유역의 노출성(E)과 취약성(V)을 정의하고, 빈도-유량 곡선, 수위-유량 곡선, 수위-노출성$\cdot$취약성 곡선, 빈도-노출성$\cdot$취약성 곡선을 정의하도록 한다. 빈도-유량 곡선은 대상유역의 하천정비기본계획 자료와 실측자료를 이용해 산정하고,, 수위-유량 곡선은 HEC-G대RAS 모형을 이용하여 산정하였다. 대상유역은 경기도 용인시에 위치한 금학천 유역으로, 산정결과는 최대 노출성 및 취약성 지수를 각각 100으로 볼 때, 노출성 지수는 28, 취약성 지수는 32.25이고, 50년 빈도 홍수피해 잠재위험도는 30.13로 산정되었다.

  • PDF

장기간 사용한 Cr-Mo강의 내식성 향상 방법에 관한 연구 (A Study of Corrosion Resistance Improvement for Cr-Mo Steel in Long Term Service)

  • 진영준
    • 한국안전학회지
    • /
    • 제21권3호
    • /
    • pp.8-15
    • /
    • 2006
  • It is no wonder that mechanical structures are accompanied by problems related to corrosion after being exposed to long hours of work. Corrosion of mechanical structures has been the most serious problem in the field of industry. The present study employed a laser beam irradiation test to improve the corrosion resistance of degraded Cr-Mo steel, which was used for more than 60,000 hours. To find the optimum irradiation test condition for the corrosion resistance of degraded Cr-Mo steel, hardness and residual stress measurements, micro-structural observation, and the electrochemical potentiokinetic reactivation (EPR) tests were performed with changes in laser beam test conditions including laser beam output, diameter, and velocity. Thus, the present study indicates that the optimum test condition and absorption energy for a laser beam test need to be determined to enhance corrosion resistance of degraded Cr-Mo steel.

Efficient Operation Policy in a Closed-loop Tire Manufacturing System with EPR

  • Ko, Young-Dae;Hwang, Hark
    • Industrial Engineering and Management Systems
    • /
    • 제8권3호
    • /
    • pp.162-170
    • /
    • 2009
  • This paper deals with a closed-loop remanufacturing system with one manufacturer and one remanufacturer. The manufacturer sells new products bearing the 'Extended Producer Responsibility (EPR).' It is assumed that the manufacturer's collection rate of used products depends only on the buy-back cost, while that of the remanufacturer depends on the minimum allowed quality level of used products in addition to the buy-back cost. Through the development of mathematical models with the objective function of maximizing profit, we study an efficient operation policy of each party. The decision variables are the unit selling price of new products and remanufactured products, the unit buy-back cost of the used products of the manufacturer and remanufacturer, and the minimum allowed quality level. The validity of the model is examined through numerical examples and sensitivity analysis.

Background of the automobile recycling law enactment in Japan

  • Togawa, Kenichi
    • 자원리싸이클링
    • /
    • 제14권3호
    • /
    • pp.3-5
    • /
    • 2005
  • 일본에서는 2002년 1월 5일 흔히 "자동차재활용법"이라고 알려진 '폐자동차 재활용에 관한 법률'이 시행되었다. 본 고에서는 이 법의 특징들과 제정된 배경 및 이 법이 향후 일본 자동차 산업에 미칠 수 있는 영향들을 살펴보고자 한다. 이 법에 따라서 현재 일본의 자동차 재활용 시스템은 2005년 1월 1일부터 새로운 형태로 바뀌었다.