• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• Journal of Wetlands Research
• /
• v.17 no.2
• /
• pp.146-154
• /
• 2015

Domestic railway industry has grown in numbers, scale of railway ndustrial and operation because was focused on an environmentally sustainable transportation. However, it is not enough to treat and prevent heavy metals which occur as the railway operation increases. The heavy metals occurred when the operating railway and it will be flow into water system with rainfall effluent during rainfall. will flow out along with the rainfall effluent when rainfall comes. In case of a railway bridge, In particular, heavy metals were flow into the water system without any treatment from railway bridges where located nearby rivers and lakes. So, rainfall effluent from railway facilities was occurred pollution of water system. For the prevent of heavy metal runoff during rainfall, the adsorptivity of material in railway roadbed is important.In this study, adsorptivity of gravel which is main gravel and blast-furnace slag were conducted adsorption test and deducted Freundlich's and Langmuir's isothermal adsorption equations. Safety as railway subbase course material was evaluated using modeling. As a result, absorption amount of slag, Cd and Cu, was shown higher than gravel and Pb along with Zn showed higher absorption amount of gravel. However, absorption amount of slag was shown higher than gravel used as railway subbase course material as time passes by. Absorption features had more suitable determination coefficient of heavy metals in warm absorption type such as Langnmuir compared to warm absorption type like Freundlich. To add, they showed less transformation by about 10% compared to gravel in safety evaluation through modeling. This is a railway subbase course material that prevents water outflow of heavy metal thus we can know slag is needed to be used.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.635-653
• /
• 1999

The present work considers work considers research strategies to address global warming. Specifically, this work considers the development of technologies of importance for the reduction of greenhouse gas emission and, especially, the materials that are critical to these technologies. It is argued that novel materials that are essential for the production of environmentally friendly energy may be developed through a special kind of engineering: interface engineering, rather than through classical bulk chemistry. Progress on the interface engineering requires to increase the present state of understanding on the local properties of materials interfaces and interfaces processes. This, consequently, requires coordinated international efforts in order to establish a strong background in the science of materials interfaces. This paper considers the impact of interfaces, such as surfaces and grain boundaries, on the functional properties of materials. This work provides evidence that interfaces exhibit outstanding properties that are not displayed by the bulk phase. It is shown that the local interface chemistry and structure and entirely different than those of the bulk phase. In consequence the transport of both charge and matter along and across interfaces, that is so important for energy conversion, is different than that in the bulk. Despite that the thickness of interfaces is of an order to a nanometer, their impact on materials properties is substantial and, in many cases, controlling. This leads to the conclusion that the development of novel materials with desired properties for specific industrial applications will be possible through controlled interface chemistry. Specifically, this will concern materials of importance for energy conversion and environmental monitoring. Therefore, there is a need to increase the present state of understanding of the local properties of materials interfaces and the relationship between interfaces and the functional properties of materials. In order to accomplish this task coordinated international efforts of specialized research centres are required. These efforts are specifically urgent regarding the development of materials of importance for the reduction of greenhouse gases. Success of research in this area depends critically on financial support that can be provided for projects on materials of importance for a sustainable environment, and these must be considered priorities for all of the global economies. The authors of the present work represent an international research group economies. The authors of the present work represent an international research group that has entered into a collaboration on the development of the materials that are critical for the reduction of greenhouse gas emissions.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.513-532
• /
• 2011

Green supply chain management(GSCM) has emerged as a key approach for firms seeking to become sustainable environmentally. GSCM is a system in which the firm takes life cycle responsibility of the products through material recycling, environment-friendly production, and reverse logistics in addition to the classical operations in a supply chain. This paper endeavors to identify the relationship between the GSCM practice implementation and firms' performance among a sample of Korean manufacturing firms. Based on a literature review, eight hypotheses are put forward. First of all, a factor analysis was conducted to derive groupings of GSCM practice from the survey data which included 54 responses. Then, the first regression was conducted to examine the link between GSCM practice implementation and firms' financial performance. The result shows that green purchasing and green production are significant. The second regression was conducted to examine the impact of GSCM practice implementation on the firms' competitiveness. The result reveals that green purchasing, green production, and reverse logistics are positively signifiant.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.78-84
• /
• 2019

Recently, bio-butanol is being promoted as environmentally friendly sustainable energy. However, some problems are still obstacle for commercialization of bio-butanol: the development of cheap biomass and enhancement of fermentation ratio and preparation of economical separation process for fermented products. In the conventional ABE biobutanol fermentation process, organic acids with acetone, butanol, and ethanol are produced. Therefore, it is necessary to study phase equilibrium data and mixture properties for the design and operation of separation process. However, there is lack of design data for organic acids except acetic acid contained system. In this study, therefore, binary solid-liquid equilibria (SLE) and mixture properties: the excess molar volumes ($V^E$), molar refraction deviation (${\Delta}R$) and deviation of viscosity (${\Delta}v$) at 298.15 for $C_3-C_6$ organic acid were reported. The experimental SLE data were correlated with the NRTL and UNIQUAC activity coefficient model with less than 0.5 K of root mean square deviation (RMSD). In addition, $V^E$, ${\Delta}R$ and ${\Delta}v$ for the same binary systems were satisfactorily fitted using the Redlich-Kister polynomial with less than ca. 0.004 standard deviation.

• Journal of Life Science
• /
• v.31 no.6
• /
• pp.587-594
• /
• 2021

By 2050, 70% more food will be needed to fulfill the demands of a growing population. Among the solutions, cultured meat or clean meat is presented as a sustainable alternative for consumers. Scientists have begun to leverage knowledge and tools accumulated in the fields of stem cell and tissue engineering in efforts aimed at the development of cell-based meat. Cultured meat has to recreate the complex structure of livestock muscles with a few cells. Cells start to divide after they are cultured in a culture medium, which provides nutrients, hormones, and growth factors. An initial problem with this type of culture is the serum used, as in vitro meat aims to be slaughter free. Thus, it is contradictory to use a medium made from the blood of dead calves. The serum is expensive and affects to a large extent the production cost of the meat. A positive aspect related to the safety of cultured meat is that it is not produced from animals raised in confined spaces and slaughtered in inhumane conditions. Thus, the risk of an outbreak is eliminated, and there is no need for vaccinations and animal welfare issues. The production of cultured meat is presented as environmentally friendly, as it is supposed to produce less greenhouse gas, consume less water, and use less land in comparison to conventional meat production.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.144-150
• /
• 2021

The purpose of this paper is to introduce representative appropriate technology research organizations operating in France. Among them, we would like to investigate and introduce five institutions that have acquired a lot of experience due to their long history. Institut de Recherche pour le Développement (IRD) is a government-funded institution that strengthens science and technology infrastructure in Africa and overseas territories with the aim of supporting and educating science communities in developing countries, and conducts collaborative research with more diverse developing countries. Antenna France is an NGO organization whose main activity is to improve malnutrition in Africa. Ingénieurs sans frontiers is an NGO organization that sets sustainable development as the main goal of the association's activities and leads various activities such as education. Terre & Humanism is an NGO organization that practices ecological agriculture and carries out a social change movement urging to respect life and land, and to constitute an alternative society. Humanitarian Design Bureau is a corporation concept company that mainly carries out R&D for environmentally friendly products necessary for NGO activities.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.456-462
• /
• 2023

An electrically conductive and transparent electrode was created by applying a dispersion of pristine single-walled carbon nanotubes (SWCNTs) and silver nanowires to a polyethylene terephthalate (PET) film using a bar coating method. The SWCNTs were added to increase the electrical conductivity and transmittance of the silver nanowires while also preventing the haze from increasing due to the stacking of multiple layers containing SWCNTs and silver nanowires on the PET substrate. The silver nanowires in the electrode were also found to be stable against oxidation. The transparent electrode displayed excellent electrical and optical properties, with a sheet resistance of 47 Ω/□, transmittance of 96.72%, and haze of 1.93%. Additionally, the sheet resistance of the electrode remained stable over time, with a change of only 6.4% after a constant temperature and humidity test, making it suitable for long-term use. A hybrid transparent electrode that is economically feasible and environmentally sustainable has been developed through the utilization of pristine SWCNT and silver nanowire.

• Composites Research
• /
• v.36 no.2
• /
• pp.126-131
• /
• 2023

Growing environmental concerns regarding pollution caused by conventional plastics have increased interest in biodegradable polymers as alternative materials. The purpose of this study is to develop a 100% biodegradable nanocomposite material by introducing organic nucleating agents into the biodegradable and thermoplastic resin, poly(lactic acid), to improve its properties. Accordingly, cellulose nanofibers, an eco-friendly material, were adopted as a substitute for inorganic nucleating agents. To achieve a uniform dispersion of cellulose nanofibers (CNFs) within PLA, the aqueous solution of nanofibers was lyophilized to maintain their fibrous shape. Then, they were subjected to primary mixing using a twin-screw extruder. Test specimens with double mixing were then produced by injection molding. Differential scanning calorimetry was employed to confirm the reinforced physical properties, and it was found that the addition of 1 wt% CNFs acted as a reinforcing material and nucleating agent, reducing the cold crystallization temperature by approximately 14℃ and increasing the degree of crystallization. This study provides an environmentally friendly alternative for developing plastic materials with enhanced properties, which can contribute to a sustainable future without consuming inorganic nucleating agents. It serves as a basis for developing 100% biodegradable green nanocomposites.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.53-53
• /
• 2022

Modem agricultural production needs to provide sustainable management practices that are eco-friendly and low cost. Plant extracts are a cost-effective and environmentally friendly alternative to synthetic plant growth regulators. This study was therefore carried out to investigate the effects of various plant extracts produced using different extraction methods on the vegetative growth of rice under laboratory and greenhouse conditions. For this study, seventeen plant extracts were made from plant species such as leaves of M. arvense, C. asiatica, M. oleifera, V. radiata, V. unguiculate, P. guajava, A. vera, and A. tuberosum, aboveground plant parts of C. rotundus, M. sativa, and P. frutescens, roots of R. undulatum, tubers of A. sativum, leaves and stems of G. max (cv. Taegwang) as well as rice straw and hulls (cv. Hopyeong). As a test crop, we applied these extracts to rice plants. For the purpose of making our extracts, some plant materials and species were collected in fields and others were purchased from Chonnam Hanyaknonghyup Cooperation (South Korea). Leaves, roots, and aboveground plant parts of plant species were dried, ground, extracted (water, boiling water and ethanol) and fermented. Rice growth promotion effects were determined using plant extracts at 0, 0.05, 0.1, 0.5, and 1% concentrations under petri dish conditions. Seven selected plant extracts were applied to rice seeds with soil drench application or seedling at 3-4 leaf stages with soil and foliar applications under greenhouse conditions. For comparison with extracts, we used urea at 0.6%. Of the 17 water extracts used in this study, 10 extracts reduced rice growth, but the other 7 extracts (P. guajava, A. vera, A. tuberosum, M. sativa, A. sativum, and G. max) increased growth by 40-60% on compared to the control in Petri dish bioassay. Thus, these 7 extracts were selected for further study. Under greenhouse conditions, rice growth also increased by 20-40% when the same 7 extracts were applied to rice seeds using soil drench application. Furthermore, at the 3-4 leaf stage rice growth also increased 30-80% or 30-60% when the same 7 extracts were applied using soil and foliar applications. Overall, the 7 extracts produced higher rates of growth promotion when soil drench application was used than when foliar application was used. In the case of boiling water and ethanol extracts, rice growth increased only 20% in response to both soil drench and foliar application of the same 7 extracts. Rice growth promotion was greater when extracts were produced using water extraction method than boiling water and ethanol extraction methods. Most notably, the 7 water extracts used in this study produced higher rates of growth promotion than urea at 0.6% which is typically used for crop growth promotion. Overall, the 7 water extracts when applied using soil drenching method can be used as effective growth promotors of rice in organic agriculture.