• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.232-238
• /
• 2012

In this study, the noise mapping simulation is executed to design an effective barrier reducing noise levels of a school site. The geographical features of the ambient site and the school buildings are modelled in detail in order to consider sound propagation, deflection, and absorption phenomena etc. The main sound source, sound power level of expressway, is estimated on the basis of measured noise levels at several points of the site. The noise mapping simulation is performed by using ENPro, environmental noise prediction program based on ISO 9613 to analysis the effectiveness of noise barrier. Consequently, the noise barrier is designed to meet an environmental noise standard and satisfy low cost and safety conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.535-540
• /
• 2005

In environmental impact assessment, noise impact assessment usually consists of three stages surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of project. When predicting noise level in urban area, this method does not consider acoustic phenomena like multi reflection, diffraction and absorption due to complex topographic configuration of building and terrains. For the purpose, a noise mapping tool is utilized to produce a series of noise maps, which are those for the present, for the works of construction and for the future. For accurate noise mapping, acoustical and topographic information is essential. Standard sound power levels and directivities of various construction equipments are required and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.371-377
• /
• 1997

This paper presents the geophysical applications to the environmenml problem in an abandoned mine area. We would like to focus our attention on the mapping of the soil contamination and the detection of the buried mine tailings. For mapping the soil contamination. measurements of both in-situ magnetic susceptibility (k) and terrain conductivity were carried out. In-situ magnetic susceptibilities of the contaminated soil due to the acid mine drainage show higher values than those of the uncontaminated area. However. those data do not show the correlation with the degree of the soil contamination observed on the surface. The least-squares fitted formula obtained with the measured insitu magnetic susceptibilities is $k=4.8207{\times}W^{0.6332}$, where W is the $Fe^{+2}$ weight percentage. This weight gives most effect to magnetic susceptibility of the soil. Lateral variations of the soil contamination in the shallow subsurface can be detected by the electrical conductivity distributions from EM induction survey. TDIP (Time Domain Induced Polarization) and EM induction surveys were conducted to detect the buried mine tailings. From the results of TDIP, the spatial zone, which shows high chargeability-low resistivity, is interpreted as the buried mine tailings. Therefore, it is concluded that it is possible to discriminate the spatial zone from the uncontaminated ground.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1097-1107
• /
• 2020

Assessment of soil carbon stock is essential for climate change mitigation and soil fertility. The digital soil mapping (DSM) is well known as a general technique to estimate the soil carbon stocks and upgrade previous soil maps. The aim of this study is to calculate the soil carbon stock in the top soil layer (0 to 30 cm) in Jeolla Province of South Korea using the DSM technique. To predict spatial carbon stock, we used Cubist, which a data-mining algorithm model base on tree regression. Soil samples (130 in total) were collected from three depths (0 to 10 cm, 10 to 20 cm, 20 to 30 cm) considering spatial distribution in Jeolla Province. These data were randomly divided into two sets for model calibration (70%) and validation (30%). The results showed that clay content, topographic wetness index (TWI), and digital elevation model (DEM) were the most important environmental covariate predictors of soil carbon stock. The predicted average soil carbon density was 3.88 kg·m-2. The R2 value representing the model's performance was 0.6, which was relatively high compared to a previous study. The total soil carbon stocks at a depth of 0 to 30 cm in Jeolla Province were estimated to be about 81 megatons.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.327-335
• /
• 2006

Three processing strategies of seismic refraction data are tested in terms of velocity and depth profiles or structures for mapping of geological discontinuities: GRM(generalized reciprocal method), GLI(generalized linear inversion), Tomography. The test data used in this study are the shot gathers reconstructed by numerical modeling for the structures of 3 planar layers(horizontal, inclined), the buried vertical fracture zones, and vertical fault zones. Tomography is shown to be very efficient for mapping of more complicated tone such as vertical fault and buried fracture zones, whereas GRM and GLI can be useful for horizontal and/or inclined layers, probably on their bases of analysis of first arrivals in travel time curves.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.443-449
• /
• 2018

Acquiring indoor point cloud, using SLAM (Simultaneous Localization and Mapping) based mobile mapping system, is an element progress for development of as-build BIM (Building Information Model) for the maintenance of the building. In this research we proposed a simulation-based target geometry determination for extrinsic calibration of multiple 2D laser scanning mobile system. Four different types of calibration sites were designed: (1) circle type; (2) rectangle type; (3) double circle type; and (4) double rectangle type. Based on the measurement values obtained from each simulated calibration site geometry, least squares solution based extrinsic calibration was derived. As a result, the rectangle type geometry is most suitable for extrinsic calibration of this system. Also, correlation values between extrinsic calibration parameters were high, and calibration results were distinct according to the calibration sites.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.662-663
• /
• 2004

In general, mineral resources prospect is performed in several methods including geological survey, geological structure analysis, geochemical exploration, airborne geophysical exploration and remote sensing, but data collected through these methods are usually not integrated for analysis but used separately. Therefore we compared various data integration techniques and generated final mineral resources potentiality map.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2007.10a
• /
• pp.74-77
• /
• 2007

• Spatial Information Research
• /
• v.14 no.4 s.39
• /
• pp.433-449
• /
• 2006

Two primary objectives of this study were to determine important personal factors in performing cognitive distance mapping, and to understand how human's cognitive distance mapping capabilities were influenced by reference and subjects' locations using Global Positioning System (GPS). Undergraduate and graduate students at the University of Kansas, USA were interviewed and surveyed throughout the campus area giving them a paper-and-pencil test. Study results showed that females had more accurate cognitive mapping capability than males regardless of ethnic background and academic levels. Generally, subjects with longer affiliation with the university, higher ages and academic levels had less variability in their mapping accuracy. Subjects tended to more accurately map the target locations closer to the reference points than those located farther away, and subjects who were closer to a reference point performed their distance mapping better than those farther away. A correlation analysis reported that male subjects used reference-to-target and subject-to-reference distances more sensitively than females to estimate the locations of the targets. This result indicates that males might have used the reference point-based map scale more strenuously than females.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.98-108
• /
• 2004

The concept of community capacity is regarded as the ability of people and communities to do works associated with the determinant factors and indicators of the circumstances of socio-economic, environmental and physical contexts. Building capacity of communities to effectively analyze our problematic issues and planning of community development is often required to scrutinize current status of community of socio-economic and infrastructural capacity development with GIS. We consider community development as a planned effort to build assets that increase the capacity of communities. Spatial asset mapping is the process enabling to identify and make inventories of tangible and intangible assets. This mapping requires developing a capacity inventory that collects individual organizational and community capacities in view of human, socio-cultural, natural, financial, digital, and physical capacity. The purpose of this research is not only designed to suggest a new concept capacity building, but also proposes a more creative framework of asset-based community cap linking to parcel-based spatial asset mapping and capacity mapping process.