• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1B
• /
• pp.97-103
• /
• 2009

The decompostion characteristics of NAPL TCE in cement/slag/Fe(II) system were studied with various TCE concentration and amounts of binders (cement/slag) For analyses of the TCE degradation by cement/slag/Fe(II), TCE solution injected using gas-tight syringe after TCE solution dissolved a methanol. Initial concentrations of TCE are 0.42 mM, NAPL condition 11.7 mM and saturated condition 16.8 mM respectively. The result showed that the cases of 8.4 mM and 4.2 mM are decreased 88% of total TCE concentration within 18 days. NAPL condition 11.7 mM was decreased 84% within 50 days and saturated condition 16.8 mM was decreased 60% of total TCE concentration within 60 days respectively. This showed that degradations of TCE in various concentrations were in one kind reaction as pseudo-first-order. TCE was dissolved as aqueous solution before degraded. The reaction rate was increased $0.12day^{-1}$, $0.24day^{-1}$, $0.31day^{-1}$ when the mass of media 0.1, 0.2, 0.3 S/L rate was increased. TCE reaction speed is affected by cement/slag surface ares in this system. When HDTMA, experimental facter, was added, TCE decomposition rate was high despite the high concentration of NAPL. and The decompostion characteristics of NAPL TCE in cement/slag/Fe(II) system were studied by using modeling.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5C
• /
• pp.209-218
• /
• 2010

In residual soils, large particles such as rock fragments or gravel are surrounded by sand or clay. The strength of such granular mixtures can be controlled by the concentration of fine or coarse grains. The percentage by weight, size or shape of gravel in the mixture that can control the strength of the mixture has not been clearly determined for various granular mixtures. In this study, the effect of dispersed gravels on the shear characteristics of sand was evaluated. Large and small gravels were inserted in the middle of each layer with moist Nakdong River sand and compacted into a cylindrical sample with five equal layers. Embedded gravel ratios by weight were 0, 3, 9, and 14%. After consolidation, a series of undrained triaxial compression tests was performed on Nakdong River sand with dispersed gravels. Maximum deviator stresses of the Nakdong River sand with large gravels decrease up to 38% as a percentage of embedded gravels increases. Such strength degradation decreases as a confining pressure increases. The maximum deviator stress increases as the percentage by weight of small gravel increases; at 3 or 9% of gravel weight it slightly increases but at 14% of gravel weight it increases up to 34%.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.408-416
• /
• 2023

The IUCN Red List of Ecosystems serves as a global standard for assessing and identifying ecosystems at high risk of biodiversity loss, providing scientific evidence necessary for effective ecosystem management and conservation policy formulation. The IUCN Red List of Ecosystems has been designated as a key indicator (A.1) for Goal A of the Kunming-Montreal Global Biodiversity Framework. The assessment of the Red List of Ecosystems discerns signs of ecosystem collapse through specific criteria: reduction in distribution (Criterion A), restricted distribution (Criterion B), environmental degradation (Criterion C), changes in biological interaction (Criterion D), and quantitative estimation of the risk of ecosystem collapse (Criterion E). Since 2014, the IUCN Red List of Ecosystems has been evaluated in over 110 countries, with more than 80% of the assessments conducted in terrestrial and inland water ecosystems, among which tropical and subtropical forests are distributed ecosystems under threat. The assessment criteria are concentrated on spatial signs (Criteria A and B), accounting for 68.8%. There are three main considerations for applying the Red List of Ecosystems assessment domestically: First, it is necessary to compile applicable terrestrial ecosystem types within the country. Second, it must be determined whether the spatial sign assessment among the Red List of Ecosystems categories can be applied to the various small-scale ecosystems found domestically. Lastly, the collection of usable time series data (50 years) for assessment must be considered. Based on these considerations, applying the IUCN Red List of Ecosystems assessment domestically would enable an accurate understanding of the current state of the country's unique ecosystem types, contributing to global efforts in ecosystem conservation and restoration.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.2
• /
• pp.103-110
• /
• 2024

Lipid nanoparticles (LNPs) are a stable and an effective system that protects cell-impermeable biologically active compounds such as nucleic acids, proteins, and peptides against degradation caused by subtle environmental changes. This study focuses on developing LNPs encapsulating gallic acid (GA), an antioxidant, to effectively prolong the half-life of tetrahexyldecyl ascorbate (THDC), a oil-soluble vitamin C derivative. These LNPs were synthesized in small, uniform sizes at room temperature and pressure conditions using a microfluidics chip. Compared to liposomes manufactured under high pressure and high temperature conditions through conventional microfluidizers, LNPs manufactured through microfluidics chips had excellent dispersion and temperature stability, and improved skin absorption as well as improved oxidative stability of fat-soluble vitamin C derivatives. Future studies will focus on ex vivo and in vivo evaluations to study skin improvement to further validate these results.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.28-38
• /
• 2024

Objective: Tibetan chickens, which have unique adaptations to extreme high-altitude environments, exhibit phenotypic and physiological characteristics that are distinct from those of lowland chickens. However, the mechanisms underlying hypoxic adaptation in the liver of chickens remain unknown. Methods: RNA-sequencing (RNA-Seq) technology was used to assess the differentially expressed genes (DEGs) involved in hypoxia adaptation in highland chickens (native Tibetan chicken [HT]) and lowland chickens (Langshan chicken [LS], Beijing You chicken [BJ], Qingyuan Partridge chicken [QY], and Chahua chicken [CH]). Results: A total of 352 co-DEGs were specifically screened between HT and four native lowland chicken breeds. Gene ontology and Kyoto encyclopedia of genes and genomes enrichment analyses indicated that these co-DEGs were widely involved in lipid metabolism processes, such as the peroxisome proliferator-activated receptors (PPAR) signaling pathway, fatty acid degradation, fatty acid metabolism and fatty acid biosynthesis. To further determine the relationship from the 352 co-DEGs, protein-protein interaction network was carried out and identified eight genes (ACSL1, CPT1A, ACOX1, PPARC1A, SCD, ACSBG2, ACACA, and FASN) as the potential regulating genes that are responsible for the altitude difference between the HT and other four lowland chicken breeds. Conclusion: This study provides novel insights into the molecular mechanisms regulating hypoxia adaptation via lipid metabolism in Tibetan chickens and other highland animals.

• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.281-298
• /
• 2024

Stainless steel bolts (SSB) are increasingly utilized in bolted steel connections due to their good mechanical performance and excellent corrosion resistance. Fire accidents, which commonly occur in engineering scenarios, pose a significant threat to the safety of steel frames. The post-fire behavior of SSB has a significant influence on the structural integrity of steel frames, and neglecting the effect of temperature can lead to serious accidents in engineering. Therefore, it is important to evaluate the performance of SSB at elevated temperatures and their residual strength after a fire incident. To investigate the mechanical behavior of SSB after fire, 114 bolts with grades A4-70 and A4-80, manufactured from 316L austenitic stainless steel, were subjected to elevated temperatures ranging from 20℃ to 1200℃. Two different cooling methods commonly employed in engineering, namely cooling at ambient temperatures (air cooling) and cooling in water (water cooling), were used to cool the bolts. Tensile tests were performed to examine the influence of elevated temperatures and cooling methods on the mechanical behavior of SSB. The results indicate that the temperature does not significantly affect the Young's modulus and the ultimate strength of SSB. Up to 500℃, the yield strength increases with temperature, but this trend reverses when the temperature exceeds 500℃. In contrast, the ultimate strain shows the opposite trend. The strain hardening exponent is not significantly influenced by the temperature until it reaches 500℃. The cooling methods employed have an insignificant impact on the performance of SSB. When compared to high-strength bolts, 316L austenitic SSB demonstrate superior fire resistance. Design models for the post-fire mechanical behavior of 316L austenitic SSB, encompassing parameters such as the elasticity modulus, yield strength, ultimate strength, ultimate strain, and strain hardening exponent, are proposed, and a more precise stress-strain model is recommended to predict the mechanical behavior of 316L austenitic SSB after a fire incident.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.4
• /
• pp.856-867
• /
• 2023

Due to the increase in fine dust caused by environmental pollution, oxidative damage and aging of the skin are accelerated. In this study, the antioxidant, hyaluronic acid, filaggrin, MMP-1, and ROS level of selected herbal extracts were evaluated to confirm the protective efficacy of keratinocytes treated PM10. As a result, the antioxidant capacity of 1,1-diphenyl-2-picrylhydrazyl(DPPH), 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid(ABTS), and FRAP assay increased in a concentration-dependent manner. Keratinocytes the group treated with 300 ㎍/ml of PM10, hyaluronic acid and filaggrin decreased by more than 50%, and increased in the group treated with extracts of Alpinia officinarum, Ulmus macrocarpa, and Ulmus macrocarpa but decreased when the extract was treated, which is evaluated as inhibiting the degradation of collagen and elastin. In addition, in the case of ROS measurement using zebrafish embryos, it was confirmed that the extract was reduced when the extract was treated 25 ㎍/ml, the intensity of fluorescence similar to the negative control was shown, confirming that the production of ROS was significantly reduced. Through this study, the selected oriental medicinal materials, Alpinia officinarum, Ulmus macrocarpa, and Ulmus macrocarpa, protect the skin from fine dust. It is thought that it can be used as an anti-aging product for skin improvement as a material that can be improved or improved.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.5-12
• /
• 2012

Antibiotics have been considered emerging compounds due to their continuous input and persistence in environment. Due to the limited biodegradability and widespread use of these antibiotics, an incomplete removal is attained in conventional wastewater treatment plants and relative large quantities are released into the environment. In this study, it was determined the adsorption and photocatalysis kinetics of antibiotics (Sulfamethoxazole, SMX) with various catalyst (Titanium dioxide; $TiO_2$, Hydroxyapatite; HAP) conditions under UV/$TiO_2$/HAP system. In addition, the statistical analysis of response surface methods (RSM) was used to determine the effects of operating parameters on UV/$TiO_2$/HAP system. $TiO_2$/HAP adsorbent were found to follow the pseudo second order reaction in the adsorption. In the result of applied intrapaticle diffusion model, the constants of reaction rate were $TiO_2$=$0.064min^{-1}$, HAP=$0.2866min^{-1}$ and $TiO_2$/HAP=$0.3708min^{-1}$, respectively.The result of RSM, term of regression analysis in analysis of variance (ANOVA) showed significantly p-value (p<0.05) and high coefficients for determination values($R^2$=96.2%, $R^2_{Adj}$=89.3%) that allowed satisfactory prediction of second order regression model. And the estimated optimal conditions for Y(Sulfamethoxazole removal efficiency, %) were $x_1$(initial concentration of Sulfamethoxazole)=-0.7828, $x_2$(amount of catalyst)=0.9974 and $x_3$(reation time)=0.5738 by coded parameters, respectively. According to the result of intraparticle diffusion model and photocatalysis experiments, it was shown that the $TiO_2$/HAP was more effective system than conventional AOPs(advanced oxidation processes, UV/$TiO_2$ system).

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.647-655
• /
• 2016

Lead dioxide ($PbO_2$) is an electrode material that is effective for organic pollutant degradation based on hydroxyl radical ($^{\bullet}OH$) attack. Representative parameters for $PbO_2$ electrodeposition are summarized to current, temperature, reaction time, concentration of Pb(II) and electrolyte agent. In this study, $Ti/PbO_2$ electrodes were fabricated by electrodeposition method under controlled reaction time, current density, temperature, concentration of $HNO_3$ electrolyte. Effects of deposition parameters on $^{\bullet}OH$ evolution were investigated in terms of electrochemical bleaching of p-Nitrosodimethylaniline (RNO). As major results, the $^{\bullet}OH$ evolution was promoted at the $PbO_2$ that was deposited in longer reaction time (1-90 min), lower current density ($0.5-50mA/cm^2$), higher temperature ($5-65^{\circ}C$) and lower $HNO_3$ concentration (0.01-1.0 M). Especially, the $PbO_2$ which was deposited in 0.01 M of lowest $HNO_3$ concentration by applying $20mA/cm^2$ for above 10 min was most effective on $^{\bullet}OH$ evolution. The performance gap between $PbO_2$s that was best and worst in $^{\bullet}OH$ evolution was about 41%. Among the properties of $PbO_2$ related on $^{\bullet}OH$ evolution performance, conductivity of $Ti/PbO_2$ significantly influenced on $^{\bullet}OH$ evolution. The increase in conductivity promoted $^{\bullet}OH$ evolution. In addition, the increase in crystal size of $PbO_2$ interfered $^{\bullet}OH$ evolution at surface of some $PbO_2$ deposits.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.3
• /
• pp.279-287
• /
• 1994

To develop mixed pesticides of herbicide and topdressing fertilizer for paddy rice, twelve mixtures were formulated with combination of urea coated with different level of acrylic acid wax(AAW) and four herbicides, which were thiobencarb, pretilachlor, mefenacet + bensulfuron-methyl and mefenacet + bensulfuron-methyl + dymron, and effects of the mixtures for weed control, phytotoxicity and rice tillering were investigated in the laboratory and the field experiments. Release rates of active ingredient of herbicides in the distilled water were over 90% during 24 hours same as that of the reference herbicides. The release rates of nitrogen showed different patterns according to coated level of granular urea with acrylic acid wax. Optimum release rate of nitrogen as $NH_4-N$ was obtained by 5.5% AAW coating on urea for thiobencarb or pretilachlor mixture, and by 4.0% AAW coating on urea for mefenacet + bensulfuron-methyl or mefenacet + bensulfuron-methyl + dymron mixture. The pesticide active ingredients of the mixtures were stable, which showed $3.7{\sim}8.0%$ of degradation rate after 90 days of storage under $50^{\circ}C$. Effects on weed control of mixtures were acceptable for both annual and perennial weeds, while ACRI-M9213 mixture showed considerable phytotoxicity at double dose of standard. When treated the mixed pesticides to paddy rice, rice growth status including culm length, ear length, panicle number and polished rice yield exhibited no significant differences compared with the conventional treatment.