• New & Renewable Energy
• /
• v.10 no.3
• /
• pp.6-13
• /
• 2014

This paper presents a computational study of thermal performance and construction cost of horizontal ground heat exchangers (GHEs). GLD (ground loop design) simulations of various type of GHEs were carried out. Construction costs were also calculated based on standard estimating, and compared with vertical type GHE system. Besides that, dummy regression analysis was conducted to study the influence of design parameters on the simulation results in horizontal ground heat exchanger system.

• Environmental and Resource Economics Review
• /
• v.11 no.3
• /
• pp.415-446
• /
• 2002

Due to its cost effectiveness, tradeable emission permits (TEP) system has been effectively used in the USA and many other advanced countries. But, academic many researchers have been argued that TEP system would not work as an efficient regulatory tools when there are imperfect competition in permits and/or products markets. Sartzetakis (1997), however, show that TEP system can serve as an effective environmental regulation under the certain demand/cost conditions even though duopolistic production market is not competitive. In this paper we extend Sartzetakis's analysis into the differentiated products markets under the same cost conditions, and examine the relative efficiency of TEP system by comparing it with the command and control system. We then show that the main results of Sartzetakis can hold if two differentiated products markets have the symmetric demands. In particular, it is revealed that social welfare will be increased under TEP system even though consumer surplus may be decreased.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1623-1629
• /
• 2010

The high speed rolling stock system considerably belongs to a special industry which requires large-scale investment cost but the recovery term is long. Therefore, to guarantee risk and possibility of technological success in initial investment, tools concerned with various expecting methods like life cycle costs analysis and credibility management are used. In view of this characteristics, the cases on cost structure for HSR RS previously invested should be studied and the method to appropriately allocate the life cycle of each sub-system like arrangement unit, electric device, braking device, door and car body should be realized. Moreover, the environmental aspects of main manufacturer and parts supplier can be checked. This study, through the case study for HSR cost structure in introduction and operational stage of KTX, aims to seek for the method to adapt to environmental changes like EU railway industry of which object is to acquire global market competitiveness by integrating manufacturing and operation of RS and the regulation and operation of IRIS which is performed in Europe.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.574-577
• /
• 1995

The proposed method is described for scheduling their output of thermal power units so as to comply with total emission constraint, area emission constraint and the both of those constraints. Also, by using a trade-off curve, representing all dispatch alternatives and conflict between the emission and the fuel cost, the sensitivity analysis of the emission and the fuel cost is applied to this algorithm. By the way, this proposed method is analyzed how dispatch changes as a function of the total environmental cost, and as a function of the relative weighting of individual environmental insults, e.g, NOx and $SO_{2}$. By applying the proposed method to the system, the usefulness of this method is verified.

• Journal of Environmental Impact Assessment
• /
• v.22 no.4
• /
• pp.291-302
• /
• 2013

The aim of this study is to assess the social value of Ham-Pyung Butterfly Festival in the year of 2011. The tool for the assesment is the zonal travel cost method. The result of the study can be summed up as follows; First, the average individual consumer's surplus measures approximately from 29,700 to 30,100 Won. Second, the total consumer's surplus, that is the social value of the festival, ranges approximately from 7.6 to 7.7 billion Won. The most beneficiary of the event is turned up to be the people who are living in the outside of Ham-Pyung and go on a tour there. For that reason, the central government looks to have the obligation to support and to sponsor the festival.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.39-44
• /
• 2002

This paper was studied on a strategy in rice production under New round system of WTO(World Trade Organization) in Korea. Under enactment of New round system in WTO rice will be opened at the world market and thus rice growers will compete with this marketing system. In this regard, rice industry in Korea would be "a theory of rice triangle" such as high quality, low cost, and environmental friendly system. High quality rice would be obtained through a cultivar, cultivation technology, and quality control(QC) to compete against oversea's dealer. Lower cost in rice production should be concentrated into rapid decrease in rural population and into introducing for young generation. Rice cultivation has been played major role in this peninsula in terms of a preservation of water resource, fresh air and prevention of soil erosion.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.588-591
• /
• 2004

Recently as people's values are changing from development into quality of life, the needs of environmentally friendly construction are gradually increasing, also popular discontent about the construction pollution such as the noise and vibration cause by construction machinery is increasing. Even though it is impossible to eliminate construction pollution fully, it is necessary to make efforts to reduce construction pollution to a minimum. The first step solving these matters is that the necessary sum of expense must be secured as the environmental budgeting method regarding Environmental management costs. To provide an efficient budgeting method, a interview with the person in charge of environment management was conducted. and the environmental management costs were analyzed through the historical data.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.11-20
• /
• 2016

Depletion of natural resources and reduction of greenhouse gas emissions are an important issue which we have to solve. The recycling of waste has emerged as a global concern. In Korea, the development of cost-effective treatment and recycling technologies also need to be improved. In this study, we compared and analyzed the cost per unit of treatment and recycling of organic waste, and presented an effective recycling scheme. We investigated the current status of treatment and costs for six types of organic wastes from 80 workplaces, including organic wastewater treatment sludge, processed organic sludge, and plant residues. In addition, environmental costs for greenhouse gas reduction were calculated. It's an economic way that organic waste is composted and used as cement additives. In particular, the economic analysis was done by realistic results of the survey target companies. In conclusion, in order for reliable processing and recycling of organic wastes, wastewater treatment sludge and sewage sludge need to be classified based on hazard characteristics. Finally, technical difficulties need to be further resolved such as odors, leachate, and debris on recycling organic wastes.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.761-782
• /
• 2006

Public concern about potential environmental risks of agricultural business for the livestock production and processing is increasing. However, due to differences in general industry structural characteristics, such as farm production and waste management practices, the effect of environmental policies may differ from species to species as well as across size categories. I hypothesize that additionally the Hog subsector may be more responsive to (or a greater driver of) a changing environmental policy environment than the beef cattle subsector. As a result, I expect to see more evidence of sensitivity in the environmental policy milieu from hog-operation stocking and location decisions than with the beef cattle industry. The written stringency may not effective, instead state's willingness to enforce has directed and regulated. However, in presence of rapid structural change, just like hog, industry location is affected by state regulation. The environmental compliance cost may be a small portion of industry total cost and fixed cost of beef industry makes for them to take into account environmental compliance for their decision location making. The special movements of flog industry have chance to minimize the cost of the operation and they willing to locate less stringent place.

• Computers and Concrete
• /
• v.26 no.4
• /
• pp.317-325
• /
• 2020

A precise estimation of the natural time period of buildings improves design quality, causes a significant reduction of the buildings' weight, and eventually leads to a cost-effective design. In this study, in order to optimise the reinforced concrete frames design, some symmetrical and unsymmetrical buildings composed of solid and hollow members have been simulated using finite element software SAP 2000. In numerical models, different parameters such as overturning moment, story drift, deflection, base reactions, and stiffness of the buildings were investigated and the results have been compared with strength and serviceability limit criteria proposed by Australian Standard (AS 3600 2018). Comparing the results of the numerical modelling with existing standards and performing a cost analysis proved the merits of hollow box sections compared to solid sections. Finally, based on numerical simulation results, two equations for natural time period of moment resisting reinforced concrete buildings have been presented. Both derived equations reflected higher degree of correlation and reliability with different complexities of building when compared with existing standards and relationships provided by other scholars. Therefore, these equations will assist practicing engineers to predict elastic behaivour of structures more precisely.