• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.93-102
• /
• 2015

Most existing residential environment of disabled people has made them exposed to the risk of safety accidents, and therefore hinders their independent living. In this regard, the importance of desirable residential environment has emerged. Some preceding studies have addressed the characteristics of disabled people's residential environment plan; however, the information on what environmental benefits are offered through such characteristics is insufficient. This study aims to analyze the housing design guidelines for disabled people in respect of the benefit of disabled people who are actual users. In this study, essential design guidelines for disabled people verified through expert workshop panel was analyzed based on user benefit theory. According to the study results, the total guidelines have the most characteristics supporting behavioral facilitation, and mainly consist of physiological maintenance characteristics related to disabled people's health and safety. Also, it is founded that environmental affordance essentially required depending on each spatial function was different. The ratio of physiological maintenance item is high in access route, unlike living room, kitchen and bed room where behavioral facilitation is especially emphasized. These findings can be utilized as basic data for customized residential environment plan to realize residential welfare for disabled people.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.416-423
• /
• 2013

An adjusted assessment model based on benefit-cost analysis (BCA) is proposed for evaluating the economic efficiency of automated construction technologies. In contrast to conventional BCA, the model does not compare monetary values, but the differences in benefits and costs between traditional and automated construction methods. To verify the usefulness of the model, it was applied to a real-scale building construction project that used a fully automated building construction system, and the face validity of the model was confirmed. The results indicate that the model can support decision makers in identifying valuable benefit factors and in assessing the cost effectiveness of the system.

• Journal of Korea Technology Innovation Society
• /
• v.7 no.3
• /
• pp.657-679
• /
• 2004

The purpose of this paper is to measure economic impact of marine environment conservation research development project. Benefit-Cost(B/C) analysis and Contingent Valuation Methods(CVM) are used to valuate the benefits from the research development projects. A period of three years for research development fund is considered as a part of the costs and adjusted to the net present value (NPV) of the 2002 ending period. The environmental charges for marine environment improvement are considered for the benefit measurement. The benefits are estimated by using monthly average willingness to pay, which is 2,289 Korean won. The contribution of the developing a management model for environmental pollution in the Gwangyang Bay is evaluated utilizing survey data and information. Based on the assessment by expert groups, the contribution of the model was 37.5％. The research results showed that B/C ratio is 20.61, NPV is 89,200 million Korean won, and social rate of return is 185.7％. When the level of contribution is over 1.83％ at the assessment of potential influence, it is recognized to be economically feasible. This research presents a quantitative framework for Research and Development projects for marine environment conservation, and it can be applied to decision making for the investment size of R&D projects.

• Journal of Environmental Health Sciences
• /
• v.48 no.2
• /
• pp.123-129
• /
• 2022

Background: The Environmental Health Action Program was a national project carried out from 2012~2021. It was aimed at developing public technologies to protect people's health from various environmental hazards. Objectives: One of the final goals of the project was "creating health benefits worth more than 179.2 billion won by reducing the environmental burden of disease." This study aims to evaluate whether the program sufficiently achieved the planned benefits. Methods: In order to secure consistency in evaluation, we applied the same equation used in the goal-setting process. It is comprised of six parameters to estimate the benefit: 1. The amount of medical expenses for environmental diseases; 2. The attributable proportion of environmental risk factors' 3. The rate of reduction in medical expenses for environmental diseases; 4. R&D project contribution; 5. The proportion of successful policy reflection; and 6. The contributions of the project. The corresponding variables were estimated at the end of the project, and the health benefits of the project were recalculated using the newly estimated variables. Results: It was estimated that a total of 195 billion won in health benefits occurred or will occur from 2015 to 2026. The main contributors for achieving the target were an increase in medical expenses for environmental diseases, a high score in the R&D project contribution, and the proportion of successful policy reflection. Conclusions: Technically, the equation used in the project is about medical expenses for environmental diseases rather than about the environmental burden of disease. There are several benefits of using the environmental burden of disease in the evaluation of public health policies. In further studies, developing a policy evaluation framework using indicators such as population attributable fraction would be needed.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.179-186
• /
• 2012

A climate change by increase of greenhouse gas is coming to the front by a large issue, and oxy-combustion demonstration project is coming to the attention to one plans for the reduction of carbon dioxide in power generation sector that used a fossil energy in points of time. This paper estimates benefit of electric generation, benefit of greenhouse gas reduction, benefit of environmental pollutant decreasing and domestic and foreign market value-added benefit caused by oxy-combustion demonstration project. Furthermore, this paper attempts to cost-benefit analysis, using NPV, B/C ratio, IRR techniques for oxy-combustion demonstration project. The results indicate that NPV is 681,620million KRW, B/C ratio 1.69 and IRR 21.4%. Accordingly, oxy-combustion demonstration project ensures economic feasibility that the three indicators have exceeded 0, 1.0 and 5.5%. Moreover, uses of the result is useful for the reduction of carbon dioxide in thermal power generation sector of policy decision.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.225-236
• /
• 2021

The master plan for the Four Rivers Restoration Project (June 2009) was devised, the procedure of pre-environmental review (June 2009) and environmental impact assessment (Nov. 2009), and post-environmental impact survey were implemented, and 4 times audits also inspected. and finally the Ministry of Environment's Four Rivers Investigation and Evaluation Planning Committee proposed the dismantling or partial dismantling of the five weirs of the Geum River and Yeongsan River. But controversies and conflicts are still ongoing. Therefore, this study intend to reestablish the management plan for the four major rivers by reviewing and analyzing the process so far. The results are as follows. First, a cost-benefit analysis should be performed by comparing the water quality impact of weir operation and weir opening. Therefore, it is inevitably difficult to conduct cost-benefit analysis. Second, according to the results of cost-benefit analysis on the dismantling of the Geum River and the Yeongsan River, the dismantling of the weir and the regular sluice gate opening was decided. However, there is a problem in the validity of the decision to dismantle the weir because the cost-benefit analysis for maintaining the weir is not carried out. Third, looking at the change in water quality of 16 weirs before and after the Four Major Rivers Restoration Project, COD and Chl-a were generally deteriorated, and BOD, SS, T-N, and T-P improved. However, in the cost-benefit analysis related to water quality at the time of weir dismantling, only COD items were targeted. Therefore, the cost of BOD, SS, T-N, and T-P items improved after the project were not reflected in the cost-benefit analysis of dismantling weirs, so the water quality benefits were exaggerated. Fourth, in the case of Gongju weir and Juksan weir, most of them are movable weirs, so opening the weir alone can have the same effect as dismantling when the water quality deteriorates. Since the same effect can be expected, there is little need to dismantle the weirs. Fifth, in order to respond to frequent droughts and floods, it is desirable to secure the agricultural water supply capacity to the drought areas upstream of the four majorrivers by constructing a waterway connected to the weir. At present it is necessary to keep weirs rather than dismantling them.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.126-126
• /
• 2018

• Resources Recycling
• /
• v.32 no.3
• /
• pp.45-56
• /
• 2023

This study analyzed the economic and environmental effect of recycling rhodium used in the non-catalytic field. As an analysis methodology, economic effect analysis applied cost-benefit analysis and resource-saving effect analysis and the environmental effect analysis applied life cycle assessment (LCA). The results show that from an economic point of view, the cost-benefit ratio was 1.28, which was feasible, and the cost reduction was 237,000 won based on 1 g of rhodium recycled and the amount of rhodium recycled was 7.17 billion won in 2025. As for the environmental effect, the greenhouse gas(GHG) emissions were compared between the case of recycling based on rhodium 1 kg and the case of overseas sales. The calculation results show that based on rhodium 1 kg, greenhouse gas emissions were reduced by 99.8%, from 65 kg CO₂eq./kg-Rh when recycling to 28,800 kg CO₂eq. when sold overseas. The results obtained from this study could suggest that rhodium recycling is necessary in Korea where resources are scarce by analyzing the economic and environmental effect of recycling rhodium used in the non-catalytic field.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.135-147
• /
• 2012

The benefit of traffic information on variable message sign can be divided into two. At the public level, the benefit of ATIS is the travel time saving, which is not only induced from ATIS, but also mixed with that of ATMS. In the economic appraisal of ITS, the benefit of ATIS has so far been regarded as the derived benefit from ATMS. At the user level, the benefit of ATIS is reduced driver uncertainty through the forward traffic status information. User can benefit from the information on VMS and therefore may have the willingness to pay for it. Recently attempt to qualify the value of information on VMS was increased, but there was a danger of distorting or over-estimates of the ATIS benefit because the related studies didn't consider the time-dependent attributes of traffic information and provided the single value. Estimates of the time-varying value should be needed for a rigorous economic appraisal of ATIS. In this study, we varied the value of information on VMS according to peak and non peak trip and verified the hypothesis that time-varying of value was statistically significant.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.134-145
• /
• 2015

Objectives: An objective of this study was to perform a risk assessment and social cost-benefit analysis for revising permissible exposure limits for seven substances: Nickel(Insoluble inorganic compounds), benzene, carbon disulfide, formaldehyde, cadmium(as compounds), trichloroethylene, touluene-2,4-diisocyanate. Materials and Methods: The research methods were divided into risk and hazard assessment and cost-benefit analysis. The risk and hazard assessment for the seven substances consists of four steps: An overview of GHS MSDS(1st), review of document of ACGIH's TLVs (2nd), comparison between international occupational exposure limits and domestic permissible exposure limits(3rd), and analysis of excess workplace and excess rate for occupational exposure limits based on previous work environment measurement data(4th). Total cost was estimated using cost of local exhaust ventilation, number of excess workplace and penalties for exceeding a permissible exposure limit. On the other hand, total benefit was calculated using the reduction rate of occupational disease, number of workplaces treating each substance and industrial accident compensation. Finally, the net benefit was calculated by subtracting total cost from total benefit. Results: All the substances investigated in this study were classified by CMR(Carcinogens, Mutagens or Reproductive toxicants) and their international occupational exposure limits were stricter than the domestic permissible exposure limits. As a result of excess rate analysis, trichloroethylene was the highest at 11%, whereas nickel was the lowest at 0.5%. The excess rates of all substances except for trichloroethylene were observed at less than 10%. Among the seven substances, the total cost was highest for trichloroethylene and lowest for carbon disulfide. The benefits for the seven substances were higher than costs estimated based on strengthening current permissible exposure limits. Thus, revising the permissible exposure limits of the seven substances was determined to be acceptable from a social perspective. Conclusions: The final revised permissible exposure limits suggested for the seven substances are as follows: $0.2mg/m^3$ for nickel, 0.5 ppm(TWA) and 2.5 ppm(STEL) for benzene, 1 ppm(TWA) for carbon disulfide, $0.01mg/m^3$(TWA) for cadmium, 10 ppm(TWA) and 25 ppm(STEL) for trichloroethylene, 0.3 ppm(TWA) for formaldehyde, and 0.005 ppm(TWA) and 0.02 ppm(STEL) for toluene diisocynate(isomers).