• Steel and Composite Structures
• /
• v.2 no.6
• /
• pp.429-440
• /
• 2002

A finite strip method is developed for fatigue reliability analysis of steel highway bridges. Flat shell strips are employed to model concrete slab and steel girders, while a connection strip is formed using penalty function method to take into account eccentricity of girder top flange. At each sampling point with given slab thickness and modulus ratio, a finite strip analysis of the bridge under fatigue truck is performed to calculate stress ranges at fatigue-prone detail, and fatigue failure probability is evaluated following the AASHTO approach or the LEFM approach. After the failure probability is integrated over all sampling points, fatigue reliability of the bridge is determined.

• Wind and Structures
• /
• v.7 no.6
• /
• pp.393-404
• /
• 2004

The design of truss type sign support structures is based on the guidelines provided by the American Association of State Highway and Transportation Officials Standard Specifications for Highway Signs, Luminaries and Traffic Signals and the American Institute of Steel Construction Design Specifications. Using these specifications, the column design strength is normally determined using the effective length approach. This approach does not always accurately address all issues associated with frame stability, including the actual end conditions of the individual members, variations of the loads in the members, and the resulting sidesway buckling for truss type sign support structures. This paper provides insight into the problems with the simplified design approach for determining the effective lengths and discusses different approaches for overcoming these simplifications. A system buckling approach, also known as a rational buckling analysis, is used in this study to determine improved predictions for design strength of truss type sign support structures.

• Smart Structures and Systems
• /
• v.12 no.2
• /
• pp.157-179
• /
• 2013

We present an approach, based on the state dependent Riccati equation, for designing non-collocated seismic response control strategies for buildings accounting for physical constraints, with particular attention to force saturation. We consider both cases of active control using general actuators and semi-active control using magnetorheological dampers. The formulation includes multi control devices, acceleration feedback and time delay compensation. In the active case, the proposed approach is a generalization of the classic linear quadratic regulator, while, in the semi-active case, it represents a novel generalization of the well-established modified clipped optimal approach. As discussed in the paper, the main advantage of the proposed approach with respect to existing strategies is that it allows to naturally handle a broad class of non-linearities as well as different types of control constraints, not limited to force saturation but also including, for instance, displacement limitations. Numerical results on a typical building benchmark problem demonstrate that these additional features are achieved with essentially the same control effectiveness of existing saturation control strategies.

• Wind and Structures
• /
• v.35 no.4
• /
• pp.287-296
• /
• 2022

Analyzing the typhoon wind hazards is crucial to determine the extreme wind load on engineering structures in the typhoon prone region. In essence, the typhoon hazard analysis is a high-dimensional problem with randomness arising from the typhoon genesis, environmental variables and the boundary layer wind field. This study suggests a dimension reduction approach by decoupling the original typhoon hazard analysis into two stages. At the first stage, the randomness of the typhoon genesis and environmental variables are propagated through the typhoon track model and intensity model into the randomness of the key typhoon parameters. At the second stage, the probability distribution information of the key typhoon parameters, combined with the randomness of the boundary layer wind field, could be used to estimate the extreme wind hazard. The Chinese southeast coastline is taken as an example to demonstrate the adequacy and efficiency of the suggested decoupling approach.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.419-443
• /
• 2007

Recently, the branch-out of foreign companies into domestic markets through M&A and the opened followed by the Free Trade Agreement(FTA) with America have made the environmental site assessments of specific site more necessary. In this study, through case study of conducting actual environmental site assessment by use of a toolbox approach at a large scale of chemical plant with various contaminants located in a coastal area, the problems of guideline of domestic environmental assessment of soil were complemented. And an efficient and economical assessment was achieved. All six steps such as basic investigation, environmental site history survey, sampling and analysis, installation of monitoring wells and hydrogeological survey, and data interpretation were conducted in this study. All results of document survey, geological lineament analysis, field geology survey of surrounding area, geophysical prospecting of the site, hydraulic conductivity, measurement of groundwater flow rate and direction, sampling and analysis at each step were associated and estimated as an integrated tool box approach. As a consequence of this study, toolbox approaches were very useful techniques for contamination level and site characterization of subsurface media. The given conditions to conduct a basic survey for domestic soil environment assessment of site by use of existing documents, as well as interviews with the owner/manager/user of all adjacent properties and thorough review of all practically reviewable records pertaining to the property and surrounding properties within "Guideline for Soil Environment Assessment" radii are very poor. As a result, the application of toolbox approach in the environment site assessment of site is not only more efficient and economical, but also could be very useful assessment to integrate the soil and groundwater contamination.

• Journal of Environmental Health Sciences
• /
• v.46 no.1
• /
• pp.22-34
• /
• 2020

Objectives: Based on the concept of environmental justice, we developed an evaluation model for setting and adopting the direction of environmental health policy using environmental health indicators and statistics from the local governments of Seoul, including environmentally susceptible populations. Methods: We selected a total of 20 variables based on data officially released from national and local governments. After the classification of these variables into the five components of environmental pressure, environmental status, environmental disease, sensitive population, and socioeconomic status, a basic model was constructed to calculate the relative scores of the local governments. Results: The cumulative impact scores for assessment of environmental health status were similar to those of the environmental pressure and status components. The highest five cumulative impact scores fell between 114 and 147. Local government A reported the highest scores and had high environmental pressure, environmental status and socioeconomic status. In addition, the evaluation of the other four local governments indicated that they exhibited above average scores for environmental pressure and environmental status, two did so for environmental disease, and four for sensitive population. Conclusion: We constructed a model to evaluate the environmental health status of the local governments of Seoul based on cumulative impact scores under the concept of environmental justice. As an approach for studying environmentally vulnerable areas through relative ranking, this model was feasible for policy-setting. In addition, this approach would be an analytically useful tool for decision-makers.

• Journal of Environmental Impact Assessment
• /
• v.16 no.2
• /
• pp.157-168
• /
• 2007

In case there is a need to run the multi-year urban scale air qulaity model, it is a difficult task due to the computational demand, requiring the statistical approach for the long time atmospheric environmental assessment. In an effort to approach toward long term urban assessment, the sixteen synoptic meteorological conditions are statistically classified from the estimated geostrophic wind speeds and directions of 850 hPa geopotential height field during 2000 ~ 2005. The geostrophic wind directions are subdivided into four even intervals (north, east, south, and west), geostrophic wind speeds into two classes(${\leq}5m/s$ and >5m/s), and daily mean cloud amount into 2 classes(${\leq}5/10$ and >5/10), which result into sixteen classes of the synoptic meteorological cases for each season. The frequency distributions for each 16 synoptic meteorological case are examined and some discussions on how these synoptic classifications can be used in the environmental assessment are presented.

• Management & Information Systems Review
• /
• v.24
• /
• pp.45-71
• /
• 2008

These days the international environmental regulations of the developed countries, especially from the EU, are rapidly changed to the regulations of product-based environment from a conventional end-of-pipe environmental technology. Especially the motive in this paper come from the EU's electrical and electronic equipment environment regulation. It may affect much to whole export of Korea Firms Integrated product policy has the potential to increase not only competitive power in today's global market, but also trade compatibility between countries. Furthermore it is important to make a contribution to sustainable development. CEOs must change their notions about firms' environmental policy from the end-of-pipe approach to the sustainable approach to improve company's competitive power. As emphasized a paradigm of naw environmental management by EU' environmental directives, the company must establish clean production system to save resources and reduces pollutant. Also Korean Company constructs a systematical network to collect EU' environmental regulation information which are changing rapidly. Large company will cooperate with small and medium-sized firm for their win-win strategy in the field of environmental management. Also it is necessary to make the domestic regulations of product-based environment to meet the international environmental regulations.

• Journal of Environmental Health Sciences
• /
• v.45 no.4
• /
• pp.295-309
• /
• 2019

Eight years have passed since the Korean government's medical agency officially reported that the fatal lung disease found in some hospitals in 2011 was caused by chemical disinfectants used in household humidifiers, marking the introduction of the humidifier disinfectant disaster. Over the past eight years, a medical-scientific approach has been taken by the Korean government in its efforts to solve the problems in terms of relief of and compensation for the potential victims. One of the unintended consequence of this approach has been the fact that the number of "official victims" recognized by the government is quite small compared to the total number of applicants who claim to be suffering from the humidifier disinfectant disaster. This is mainly due to the fact that the medical-scientific approach relies on excessively strict, rigid, and narrow medical-scientific criteria provided by medical experts for judging the degree of applicants' bodily damage from the use of humidifier disinfectants. As a result, this medical-scientific approach is becoming increasingly criticized by patients' organizations mainly composed of rejected applicants. Based on the analysis of the limits of this medical-scientific approach and after clarifying the social implications of the disaster from a sociological perspective, this paper proposes certain social approaches focused on participatory governance as a means of dealing with the current issue. Finally, the paper emphasizes that the act of taking social responses to the humidifier disinfectant disaster should also be considered a process of enlarging and deepening democracy in Korea.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.113-121
• /
• 1997

LHR(Landfill Hazard Ranking Model) was developed for assessing the relative hazard of landfills by using the method of value-structured approach. LHR consists of combining a multiattribute decision-making method with a qualitative risk assessment approach. A pairwise comparision method was applied to determine weights of landfill factors related. To prove the validity of weights allocation of landfill hazard evaluation factors, sensitivity analysis was applied. Firstly, the impact on landfill hazard score according to variations of weights of landfill hazard factors was analyzed. Secondly, the impact on landfill hazard score according to conditions change of landfill hazard factors was analyzed. As a result of sensitivity analysis, LHR composite scores are largely influenced by some factors following sequential order such as waste volume, proximity to sensitive environments, containment facilities, distance from drinking water supplies, and waste toxicity. The relative order of landfill hazard evaluated by LHR is not influenced by the weights change of individual factors. Therefore, LHR seems to be a credible model to determine priorities of landfill remediation based on the vulnerability of water resources.